ADC ADG-758 Manuale utente
ADG-758
(Gas - DSI)
Parts Manual
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
e-mail: techsupport@amdry.com
www.amdry.com
081999MFM/abe ADC Part No. 450419
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ___________________________ MODEL NO. __________________________________________
RESELLER’S NAME ______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number andserial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructionsmust be posted in a
prominent location near the dryer.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
ADG-758
Control Door Assembly Without Trim .................................................................................................. 2
Control Door Assembly With Trim ...................................................................................................... 3
Phase 5 OPL Microprocessor Control Panel Assembly......................................................................... 4
Phase 5 Coin Microprocessor Control Panel Assembly......................................................................... 5
Phase 5 Coin and OPL Microprocessor Control Box Assembly ............................................................ 6
Coin VaultAssembly .......................................................................................................................... 7
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 3, 2000 .................................................................................... 8
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 3, 2000 ................................................................................ 9
Dual Timer Control Box Assembly .................................................................................................... 10
Front Panel Assembly for Plastic Door .............................................................................................. 11
“Plastic” Main Door Assembly .......................................................................................................... 12
Main Door Switch Housing for Plastic Door ...................................................................................... 13
Main Door “Cold Rolled Steel (CRS)” Assembly ............................................................................... 14
Main Door Switch Assembly Cold Rolled Steel (CRS) Door .............................................................. 15
Cold Rolled Steel (CRS) Door Front Panel ....................................................................................... 16
Basket (Tumbler)/Support Assemblies ............................................................................................... 17
Drop Lint Door Assembly Without Trim ............................................................................................. 18
Drop Lint Door Assembly With Trim
For All Coin Models .................................................................................................................. 19
Lint Trap Assembly .......................................................................................................................... 20
Idler Bearing Assembly .................................................................................................................... 21
Basket (Tumbler) Bearing Assembly ............................................................................................ 22, 23
Non-Reversing T.E.F.C. Motor Mount Assembly ......................................................................... 24, 25
Reversing T.E.F.C. Motor Mount Assembly ................................................................................. 26, 27
Sensor Bracket Assemblies ........................................................................................................ 28, 29
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of April 15, 2000................................................................................... 30, 31
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. prior to April 15, 2000 ............................................................................... 32, 33
Single-Phase (1Ø) Motor, Electric Relay Panel Assembly ................................................................... 34
3-Phase (3Ø) Motor, Electric Relay Panel Assembly .......................................................................... 35
Microprocessor Reversing Rear Control Box Assembly ...................................................................... 36
Dual Timer Reversing Rear Control Box Assembly ............................................................................. 37
Outer Top/Back Guard Assemblies ................................................................................................... 38
Microprocessor Coin Acceptors Listing ............................................................................................. 39
Step Down Transformer Usage Listing ............................................................................................... 40
Additional Parts Available ................................................................................................................. 41
Table of Contents
2
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Control Door Assembly Without Trim
Illus. No. Part No. Qty. Description
1 881053 1 ADC Logo ONLY
870011 1 Logo Double Adhesive Tape Kit ONLY
2 881045* 1 ControlDoor
(includes illus. nos. 2, 3, and 8)
881046 1 Stainless Steel Control Door
(includes illus. nos. 2, 3, and 8)
3 117604 4 Neoprene Sponge Tape (sold by the foot)
4 150300 4 #10-16 x 1/2” Hex Washer TEK Screw
5 102600 1 Control Door Rod Support Catch
6 102601 1 Control Door Retainer Clip
7 102502 1 Control Door Rod
8 160005 2 Turn Latch
* Specify color when ordering.
3
Telephone: (508) 678-9000 Fax: (508) 678-9447
Control Door Assembly With Trim
Illus. No. Part No. Qty. Description
1 160015 1 High Security MK-100 LockAssembly with Key (for coin models Only)
160017 1 Special Dummy Lock (for non-coin models Only)
160104 1 MK-100 Key
2 160016 1 Lock Cam
3 881053 1 ADC Logo
870011 1 Logo Double Tape Kit
4 800020* 1 High Security Control DoorAssembly
(includes illus. nos. 4 through 7)
800144 1 Stainless Steel High Security Control DoorAssembly
(includes illus. nos. 4 through 7)
5 180202 1 Top Trim Strip (gray) with Lock Hole (38-1/4” length)
6 117603 3 Suppressor Tape/Gasket (sold by the foot)
7 150201 6 #10-32 x 1/4” Phillips Round Head Machine Screw
8 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw
9 102600 1 Control Door Rod Support Catch
10 102601 1 Control Door Rod Retainer Clip
11 102502 1 Control Door Support Rod
* Specify color when ordering.
4
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No. Part No. Qty. Description
1 112535 1 OPL English Keyboard Label Assembly
112276 1 OPL Stick-On Labels (English Only)...Not Illustrated
112275 1 3-Language OPL Stick-On Labels...Not Illustrated
(Spanish, Italian, and Hebrew)
112277 1 3-Language OPL Stick-On Labels...Not Illustrated
(English, Spanish, and Hebrew)
112278 1 5-Language OPL Stick-On Labels...Not Illustrated
(Italian, Dutch, French, German, and Chinese)
2 801255 1 Phase 5 Microprocessor Control Panel
801256 1 Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
801206 1 Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 6)
801207 1 Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 6)
3 137222 1 Phase 5 OPL Non-Reversing Microprocessor Controller (computer) ONLY
137231 1 Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY
824998 1 Phase 5 Battery Clip
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
6 150429 1 #10-16 x 1/2” TORX Head Crimptite Screw
150433 1 TORX Hand Driver (for removal of TORX head screw)
7 136048 1 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Checklabeloncomputerchiptoverifycorrectpart number for controller (computer).
5
Telephone: (508) 678-9000 Fax: (508) 678-9447
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No. Part No. Qty. Description
1 112526 1 Coin Keyboard LabelAssembly
2 801213 1 Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, and 4 through 6)
801229 1 Phase 5 Coin Control PanelAssembly with Battery Option
(includes illus. nos. 1, 2, and 4 through 6)
801259 1 Coin Control Panel
801258 1 Coin Control Panel ONLY with Battery Bracket
3 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 137213 1 Phase 5 Coin Microprocessor Controller (computer)
824998 1 Phase 5 Battery Clip
5 153010 2 #6 Star Washer
6 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
7 -------- 1 Coin Acceptor
(refer to Microprocessor Coin Acceptors Listing on page 39)
8 137056* 1 Optic Switch
9 137023* 1 Optic Switch Connector
10 137021* 3 Microprocessor Socket ONLY
880772 1 Single Coin Optical Switch Harness
824080 1 Dual Coin Optical Switch Harness
122800 1 Microprocessor (female) Pin Extraction Tool
11 136048 1 1/8-Amp (Slo-Blo) Fuse
* For dual coin models double the quantity shown.
IMPORTANT: Checklabeloncomputerchiptoverifycorrectpart number of controller (computer).
6
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty. Description
1 141403 1 Transformer - 24 VAC
2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
3 120715 1 30-Position Terminal Block
4 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
5 151000 2 #6-32 Pal Nut
6 136057 * 1/2-Amp (Slo-Blo) Fuse
7 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw
8 136008 * Fuse Block/Strip
9 122641 1 15-Pin Microprocessor Connector
10 122706 * Socket
112801 1 Pin/Socket Extraction Tool...Not Illustrated
* As required.
Phase 5 Coin and OPL Microprocessor Control Box Assembly
7
Telephone: (508) 678-9000 Fax: (508) 678-9447
Illus. No. Part No. Qty. Description
1 802112 1 Microprocessor Coin VaultAssembly Complete
(includes illus. nos. 1 through 6)
802117 1 Microprocessor Coin Vault ONLY
2 160028 1 Cam for 1/4 Turn Lock
3 875061 1 1/4 Turn Lock with Key and Cam
160105* 1 1/4 Turn Mer-Pel Key ONLY
4 802020 1 1/4 Turn Coin BoxAssembly
(includes illus. nos. 2 through 5)
802019 1 1/4 Turn Coin Box ONLY without Faceplate
125915 1 High Security (Greenwald) Coin Box ONLY with Key
5 802018 1 1/4 Turn Coin Box Faceplate
6 152014 4 1/4-20 Free Spin Wash Nut
7 102502 1 Control Door Support Rod
8 102601 1 Control Door Rod Retainer Clip
9 102600 1 Control Door Rod Catch
* Specify key number when ordering.
Coin Vault Assembly
8
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 3, 2000
Illus. No. Part No. Qty. Description
1 124030 1 15 Minute Timer - 24 VAC
2 124025 1 60 Minute Timer - 24 VAC
3 824175 1 Red Pilot Light - 24 VAC
4 122301 1 “Tap Touch” Switch
5 131932 3 Relay SPST 24v
6 120730 1 30-Position Terminal Block
7 151000 6 #6-32 Pal Nut
8 882903 1 Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
850392 - Dual Timer Panel ONLY
9 153010 2 #6 Star Washer
10 152000 3 #6-32 Hex Nut
11 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw
12 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
13 112563 1 Dual Timer Panel Overlay
14 124104 1 Pure Touch Knob with Red Pointer
15 124105 1 Pure Touch Knob with Blue Pointer
Altri manuali per ADG-758
1
Indice
Altri manuali ADC Asciugatrice
ADC
ADC AD-45x2 Manuale utente
ADC
ADC AD-464 Manuale utente
ADC
ADC ES35 Manuale utente
ADC
ADC AD-81 Manuale utente
ADC
ADC AD4545 Guida per l'amministratore
ADC
ADC AD-30V Manuale utente
ADC
ADC AD-60 Manuale utente
ADC
ADC AD-170SE Manuale utente
ADC
ADC SL20 Guida per l'amministratore
ADC
ADC ML-75 Manuale utente
ADC
ADC AD-758DV Manuale utente
ADC
ADC AD-95 Manuale utente
ADC
ADC ML-82 Manuale utente
ADC
ADC ML-175 Manuale utente
ADC
ADC ES3131 Guida per l'amministratore
ADC
ADC AD-30x2 Series Manuale utente
ADC
ADC ML-145 Guida all'installazione
ADC
ADC AD-24 Manuale utente
ADC
ADC AD-210 Manuale utente
ADC
ADC ML-175 Guida per l'amministratore
