Addonics Technologies Jasper II SID Manuale utente

Questo manuale è adatto per i seguenti modelli

1

Altri manuali Addonics Technologies Duplicatore di dischi

Addonics Technologies

Addonics Technologies UDFHNVM7 Manuale utente

Addonics Technologies

Addonics Technologies DGBRC7 Manuale utente

Addonics Technologies

Addonics Technologies HDUSI325AES Manuale utente

Addonics Technologies

Addonics Technologies DGC3 Manuale utente

Addonics Technologies

Addonics Technologies DDU7SAS Manuale utente

Addonics Technologies

Addonics Technologies AEDVDCOPPM4U Manuale utente

Addonics Technologies

Addonics Technologies HDMU3 Manuale utente

Addonics Technologies

Addonics Technologies MSHDU11T Manuale utente

Addonics Technologies

Addonics Technologies HDUS11325DX Manuale utente

Addonics Technologies

Addonics Technologies DDU3SAS Manuale utente

Addonics Technologies

Addonics Technologies HD9SITDRHS Manuale utente

Addonics Technologies

Addonics Technologies M2MSHD9H-2S Manuale utente

Addonics Technologies

Addonics Technologies UDFHNVM15 Manuale utente

Addonics Technologies

Addonics Technologies CFASTD5 Manuale utente

Addonics Technologies

Addonics Technologies UDFH7 Manuale utente

Addonics Technologies

Addonics Technologies JD2-3SN25 Manuale utente

Addonics Technologies

Addonics Technologies Jasper II JD2P3 Manuale utente

Addonics Technologies

Addonics Technologies UDFUDD7 Manuale utente

Addonics Technologies

Addonics Technologies HDUSAS Manuale utente

Addonics Technologies

Addonics Technologies MSDU5 Manuale utente

Addonics Technologies

Addonics Technologies DGBRC3 Manuale utente

Addonics Technologies

Addonics Technologies DGBR4DR11 Manuale utente

Addonics Technologies

Addonics Technologies HD4SNH Manuale utente

Addonics Technologies

Addonics Technologies UDFH15-C Manuale utente

Manuali Duplicatore di dischi popolari di altre marche

Riso

Riso CV Series Manuale

MicroBoards Technology

MicroBoards Technology GX-2 Manuale utente

Carry

Carry Pro118 Manuale utente

CopyPro

CopyPro PowerPro II Manuale utente

Primera

Primera Max Manuale utente

Logicube

Logicube EchoPlus-NG Manuale utente

Silca

Silca Delta 2000 SA Manuale utente

Reflex7

Reflex7 Daisy Chain Series Manuale utente

Vinpower Digital

Vinpower Digital SharkCopier DC Manuale utente

Codonics

Codonics Virtua E Manuale utente

Octave

Octave Copy Master II Manuale utente

Kanguru

Kanguru U2-DVDDUPE-S Manuale utente

StarTech.com

StarTech.com 8STSATDUP11 Manuale utente

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Manuale utente

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Manuale utente

MicroBoards Technology

MicroBoards Technology Quic Disc QD-2 Manuale utente

Telex

Telex SpinWise Manuale utente

Aleratec

Aleratec 260206 Manuale utente

CONTACT US

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/

Jasper II SID Duplicator PRO

Model: JD2-SID

Default settings on the duplicator:

Copy – set to WHOLE MEDIA. This setting copies everything in the source

drive to the target drive sector by sector. This setting ensures a good copy of

any drives: boot drive, blank drive, encrypted drive or drive with any file

system.

To speed up the copying, you may change the setting to SYSTEM and FILES.

This setting skips copying sectors with no recognizable data. This is only for

drives that have the following file system: NTFS, FAT/16/32, eXFAT, HFS,

EXT3/4 or XFS. This setting is not recommended for copying boot drive as

certain boot sectors may not be copied correctly.

Performance – set to SPEED for best performance. May encounter

compatibility issue with certain SSD. Should that occur, try to change the

setting to BALANCE or COMPATIBILITY.

HPA – set to SKIP.

Please review the Jasper II Controller user guide for all the detail settings.

Making duplicates

Power up the unit by pressing on the ON/OFF button at the front lower right-

hand corner. Once the unit is ready, the LCD should display

HDD Duplicator

1. Copy

The unit is now ready. Simply loads a source drive to the source slot (the first

bay on the top) and the target drives to the target slot (the lower bay). After a

few seconds, the LCD should display the number of target drives detected.

Press the OK button on the LCM control panel to start the copying.

Note: some drives may not be detected correctly. In that case, please leave the

drive inside the unit and re-start the duplicator.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email. www. Addonics.com/support/query/

Front View Rear View

WARNING

Be sure to set the 110/240V

switch to the correct setting

to your local outlet before

powering on the unit. Wrong

setting may cause damage

to the power supply

Package content:

•Jasper II SID 1:3 duplicator main unit

•One unit of 3.5” Diamond SATA drive enclosure (DSACSB), 1 unit of 3.5” Diamond IDE drive enclosure (DICSB), 1 piece 2.5” –3.5” IDE cable

(AA25IDE35)

•AC Power cord

•This quick start user guide

•Jasper II controller user guide