ADEMCO AMC15LCD Manuale utente
P/ N
TITLE
SIZE REV.
SCALE
DWG No
MATERIAL
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN MM.
- TOLERANCE
LABEL +/- 1.5
MANUAL +/- 3.5
ANGULAR +/- 0.5
FINISH
DATE
DRAWN
CHKED
APPROVALS
PARTS LIST
DESCRIPTION/MATERIAL
ITEM QTY
A4
DO NOT SCALE
2
3
PRODUCTION RELEASE & REVISION
REV DESCRIPT'N/BUYER DWG No PARTS No. BY CHK DATE
A
MANUAL INSTRUCTION
-------
50301611
Y.Y.KIM
N.C.PARK 12-10-M2
A INITIAL ------------------- 50301506 Y.Y.KIM N.C.PARK 09-25-M2
12 / 10
148(+/-5)mm
210(+/-5)mm
NOTES
1.MODEL: AMC15LCD, AMC15LCDX / ADEMCO
2.MATERIAL: ART PAPER
BIND : STAPLES-2
FINISH: -------------
4.COLOR: TEXT-BLACK
5.SIZE: 148(+/-5)mm x 210(+/-5)mm R: 0.0
6.ANY CHANGE OR ALTERNATION MUST BE
APPROVED BY HITRON ENGINEERING.
WHITE
12-10-M2
09 / 18
A ------------------- 50301611 Y.Y.KIM N.C.PARK 12-10-M2
15-Inch Color
TFT-LCD Monitor
Installation and Operating Instructions
AMC15LCD
XAMC15LCD
All information was correct at the time of publication. ADEMCO Video
reserves the right to make changes and improvements to the product with-
out notice.
WARNING:
Explanation of Graphical Symbols
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT
THROUGH VENTILATION GRILLS.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the
qualified personnel before operating it any further.
Unplug the unit from the wall outlet if it is not going to be used for several days or more. To
disconnect the cord, pull it out by the plug. Never pull the cord itself.
Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces
(rugs, blankets, etc.) or near materials(curtains, draperies) that may block the ventilation holes.
Safety Precautions
i
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
15-Inch Color Monitor
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
2. RETAIN INSTRUCTIONS
3. CLEANING
4. ATTACHMENTS
5. WATER AND MOISTURE
6. ACCESSORIES
7. CARTS
8. VENTILATION
9. POWER SOURCES
10. GROUNDING OR POLARIZATION
-
-
-
-
-
-
-
-
-
-
Read the safety and operating instructions before operating the
monitor.
Retain the safety and operating instructions for future reference.
Unplug video monitor from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not use attachments not approved by the video monitor manufacturer as
they may result in the risk of fire, electric shock or injury.
Do not use video monitor near water; for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
Do not place video monitor or equipment on an unstable cart, stand or
table. The video monitor or equipment may fall, causing serious injury and serious damage to the
equipment. Wall or shelf mounting should follow the manufacturer's instructions, and should use a
mounting kit approved by the manufacturer.
Video monitor and cart combinations should be moved with
care. Quick stops, excessive force and uneven surfaces may cause the
equipment and cart combination to overturn.
Slots and openings in the cabinet and the back or bottom are provided for
ventilation, to ensure reliable operation of the video monitor and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be blocked by placing the video
monitor on a bed, sofa, rug or other similar surface. Video monitor should never be placed near or over a
radiator or heat register. Video monitor should not be placed in a built-in installation such as a bookcase
unless proper ventilation is provided.
Video monitor should be operated only from the type of power source
indicated on the marking label. If you are not certain of the type of power supply you have, consult your
video monitor dealer or local power company.
This video monitor may be equipped with a
polarized alternating-current line plug (a plug with one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug. If your video monitor is equipped with a
three-wire grounding-type plug (a plug having a third grounding pin), this plug will only fit into a
grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
ii AMC15LCD
11. POWER CORDS
12. HEED WARNINGS
13. LIGHTNING
14. OVERLOADING
15. OBJECT AND LIQUID ENTRY
16. SERVICING
17. DAMAGE REQUIRING SERVICE
-
-
-
-
-
-
-
Do not allow anything to rest on the power cord. Do not locate video
monitor or equipment where the cord can be damaged by persons walking on it.
During lightning storms or when the monitor will be left unattended and unused
for long periods, unplug the monitor and associated equipment from the wall outlet. This will prevent
damage to the video equipment caused by lightning and power-line surges.
Do not overload wall outlets and extension cords as this can result in a risk
of fire or electric shock.
Never push objects of any kind into video monitor
through openings as they may touch dangerous voltage points or short out parts that could result in a fire
or electric shock. Never spill liquid of any kind on the product.
Do not attempt to service video monitor as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug video monitor and equipment from the wall
outlet and refer servicing to qualified service personnel under the following conditions:
Follow all instructions marked on the video monitor.
iiiAMC15LCD
A. When the power-supply cord or the plug has been damaged.
B. If liquid has spilled, or objects have fallen into the monitor.
C. If the monitor has been exposed to rain or water.
D. If the monitor does not operate normally when following the operating instructions, adjust only
those controls that are covered by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the monitor to its normal operation.
E. If the monitor has been dropped or the cabinet damaged.
F. When the monitor exhibits a distinct change in performance, this indicates a need for service.
18. REPLACEMENT PARTS
19. SAFETY CHECK
20. FIELD INSTALLATION
-
-
-
When replacement parts are required, be sure the service
technician uses replacement parts specified by the manufacturer or that have the same characteristics as
the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
Upon completion of any service or repairs to the monitor, ask the service
technician to perform safety checks to determine that the video product is in proper operating condition.
Installation should be performed by a qualified service person and
should conform to all local codes.
15-Inch Color Monitor
INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN
TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B
DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE
LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION.
THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO
FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS
NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A
PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE
HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION,
WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND
ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE
INTERFERENCE BY ONE ON MORE OF THE FOLLOWING MEASURES :
- REORIENT OR RELOCATE THE RECEIVING ANTENNA
- INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND
RECEIVER.
- CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT
DIFFERENT FROM THAT TO WHICH THE RECEIVER IS CONNECTED.
- CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN
FOR HELP
FCC COMPLIANCE STATEMENT
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD
VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
NORME NMB-003 DU CANADA.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-
003.
iv AMC15LCD
THIS PRODUCT COMPLIES WITH VARIOUS OTHER REGIONAL AND
SAFETY REGULATIONS SUCH AS: UL, CUL, CE. THESE
CERTIFICATIONS ARE NOTED ON THE PRODUCT LABEL.
15-Inch Color Monitor
vAMC15LCD
Table of Contents
Chapter 1 Introduction 1
Chapter 2 Installation 2
Chapter 3 Operation 10
Appendix A Specifications 15
Appendix B OSD Language Chart 17
Appendix C Bracket Features 18
Appendix D Stand Features 19
Appendix E Troubleshooting 20
-
-
-
-
-
-
-
-
Features 1
Connections 9
User Controls 12
List of Illustrations
Figure 1 Typical configuration 1
Figure 2 Front panel controls 10
Figure 3 Rear panel connectors 11
-
-
-
15-Inch Color Monitor
1AMC15LCD
Chapter 1 -Introduction
Figure 1 -Typical configuration
Features
Go-Anywhere Professional Color LCD Monitor
Bright, High Quality Picture
NTSC and PAL Composite and Y/C Connectors.
Thin and Lightweight, Rugged Metal Cabinets
Many Mounting and Installation Options
Low Power Consumption. - 12 Volts DC Operation.
AMC15
LCD Monitor
Typical Time-Lapse Recorder Rear Panel
Optional Loop-out to another video device
Camera or other video source
OUT
IN
VIDEO AUDIO
PC
15-Inch Color Monitor
2 AMC15LCD
Chapter 2 I-nstallation
Select Start/Setting/Control Panel.
LCD monitors may be mounted in any position or orientation. Considerations for
mounting include regard for how the monitor is going to be used, routing of
connecting cords, and locations away from heat sources (including direct sunshine
on the black case).
Mounting attatchment points include 10-32 inserts.
Cooling is not required, but some airflow around the case will
allow the small amount of heat to be dissipated.
Power is required from a regulated supply (provided) or other 12 volts DC source.
The noise on the supply must be below 100 mVpp.
The VESA plug and play standard eliminates a complicated, time consuming setup.
It allows you to connect your monitor to a Plug and Play compatible system without
the usual hassles and confusion. Your PC system can easily identify and configure
itself for use with your display.
To install the Video driver, refer to the following sequence.
CAUTION: Many portable battery systems, including automobiles,
with a nominal 12 VDC supply often have power spikes and can
operate as high as 18 VDC while charging. Make certain your power
supply meets the 12 VDC 10% requirements.
Plug and Play
Installing the Video Driver (Windows 95/98)
15-Inch Color Monitor
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali ADEMCO Monitor
