ADEMCO VIA-30PSE Manuale utente

For a detailed review of the entire system, please view the Ademco Via –30PSE system manual.

Arm and Disarm

Arm:

To arm in STAY mode when you are not leaving the premises, enter your [security code] + [STAY].

To arm in AWAY mode when you are leaving the premises, enter your [security code] + [AWAY].

To arm in MAX when there is no entry delay, enter your [security code] + [MAX].

Disarm:

To disarm, enter your [security code] + [OFF].

Battery

The Ademco Via 30PSE operates on a UB 1270 battery.

Quick Guide: Ademco Via-30PSE

Loss of AC power and use of backup battery power is indicated by NO AC. or AC LOSS.

A low battery condition is indicated by BAT or SYSTEM LO BAT

For instructions on replacing your battery, please visit our Battery Replacement Page.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2 digit zone number].

To unbypass a zone, disarm the system.

Change Time and Date

To change date and time settings, enter your [security code] + [#] + [6] + [3].

Wait until time/date are displayed, then press [*] to move the cursor ahead and [#] to move back.

Enter the 2-digit hour and minute settings, i.e., [06] and [17] for 6:17.

Press [1] for PM or [2] for AM.

Continue to enter 2-digit year, month, and day settings, i.e., [15], [08], and [23] for August 23, 2015.

To exit, press [*] when the cursor is on the last digit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window

is opened.

To turn chime mode on and off, enter your [security code] + [CHIME].

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] sequence twice to clear the alarm

event history.

Security Codes

Your system allows for additional users, however only the Master user can assign user codes to users.

To add a user, enter your [Master code] + [8] + [new user number] + [ 4-digit new user’s code].

To delete a user, enter your [Master code] + [8] + [user number]. Wait approximately three seconds

for the keypad to verify.

Trouble Conditions

Trouble conditions are issues that require your attention and are indicated on your panel’s display by the

word CHECK + zone number and accompanied by beeping from the touchpad.

To silence Trouble Conditions beeping, check that the zone’s protected areas are closed and secure.

For wireless sensors, check that no environmental changes have blocked the wireless sensor.

If the problem is corrected, enter your [security code] + [OFF] sequence twice.

For a list of Trouble Conditions other than CHECK, please see your Ademco Via –30PSE system manual.

Altri manuali per VIA-30PSE

Indice

Altri manuali ADEMCO Sistema di sicurezza

ADEMCO

ADEMCO 1026 Manuale utente

ADEMCO

ADEMCO 4130XM Manuale utente

ADEMCO

ADEMCO 4180 Manuale utente

ADEMCO

ADEMCO LYNXR-EN Manuale utente

ADEMCO

ADEMCO 4110XM Manuale utente

ADEMCO

ADEMCO VISTA-50P Manuale utente

ADEMCO

ADEMCO 676 Manuale utente

ADEMCO

ADEMCO VISTA-20SE Manuale del proprietario

ADEMCO

ADEMCO 4110XMP Manuale utente

ADEMCO

ADEMCO 4110DL Manuale utente

ADEMCO

ADEMCO Security System VISTA-10SE Istruzioni per il montaggio

ADEMCO

ADEMCO LYNX Manuale utente

ADEMCO

ADEMCO Vista-128FB Manuale utente

ADEMCO

ADEMCO ALERT III Manuale utente

ADEMCO

ADEMCO 5120XM Manuale utente

ADEMCO

ADEMCO Ademco N7001V2 Manuale utente

ADEMCO

ADEMCO Vista 4120 Manuale utente

ADEMCO

ADEMCO 4140 Manuale utente

ADEMCO

ADEMCO VISTA-20P Series Istruzioni per il montaggio

ADEMCO

ADEMCO Vista Series 4120EC Manuale utente

ADEMCO

ADEMCO LYNXR Manuale utente

ADEMCO

ADEMCO 4080 Manuale utente

ADEMCO

ADEMCO LYNXR-EN Manuale utente

ADEMCO

ADEMCO Vista-10P Istruzioni per il montaggio

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente