ADEMCO VISTA 10 Manuale utente

Ademco Vista 10 Quick Guide

https://alpha.adt.com/help/39.html[11/8/2018 11:50:29 PM]

Ademco Vista 10 Quick Guide

For a detailed review of the entire system, please view the Ademco Vista 10 manual.

« Help Center

Arm &

Disarm the

System

Battery Bypass

Protected

Areas

Chimes &

Beeps

Reset Security

Codes

Trouble

Conditions

Volume

Arm and Disarm

Arm:

To arm all sensors in STAY mode when you are not leaving the premises, enter your [security code]

+ [STAY].

To arm all sensors in AWAY mode when you are leaving the premises, enter your [security code] +

[AWAY].

To arm in MAX when there is no entry delay, enter your [security code] + [MAX]

Select

Ademco Vista 10 Quick Guide

https://alpha.adt.com/help/39.html[11/8/2018 11:50:29 PM]

Disarm:

To disarm, enter your [security code] + [OFF].

For more information on this topic please visit the complete Ademco Vista 10 manual.

Battery

The Ademco Vista 10 operates on a UB 1270 battery.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by BAT.

For instructions on replacing your battery, please go to the Battery Replacement Page for this

battery.

Bypass Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2 digit zone number.]

To unbypass a zone, disarm the system.

For more information on this topic please visit the complete Ademco Vista 10 manual.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected

door/window is opened.

To turn chime mode on and off, enter your [security code] + [CHIME].

For more information on this topic please visit the complete Ademco Vista 10 manual.

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] sequence twice to clear the

alarm event history.

Security Codes

Your system allows for up to 5 additional users, however only the Master user can assign user codes to

Ademco Vista 10 Quick Guide

https://alpha.adt.com/help/39.html[11/8/2018 11:50:29 PM]

Return to Top

users.

To add a user, enter your [Master code] + [8] + [new user number] + [ 4-digit new user’s code].

To add a duress code, simply add 1 digit higher than the master code. For example, if the master

code is 1234, the duress code will be 1235. *The duress code is used when a user is forced to arm

or disarm the system against their will.

To delete a user, enter your [Master code] + [8] + [user number]. Wait approximately three

seconds for the keypad to verify.

For more information on this topic please visit the complete Ademco Vista 10 manual.

Trouble Conditions

Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad. Any key

will silence the beeping. A display of CHECK + zone no. may indicate that a problem requires your

attention. Check the specified zone area, close any open doors or windows and enter your security code

and press [OFF]. If your system includes wireless sensors, the CHECK condition may be caused by some

change in the environment of the protected area.

To silence trouble beeps, press any key or enter your security code and press [OFF].

For a complete list of Trouble Conditions, please refer to the Safewatch and Ademco Systems

Troubleshooting page.

Volume

The volume on the Ademco Vista 10 is not adjustable.

How can we help?

Indice

Altri manuali ADEMCO Sistema di sicurezza

ADEMCO

ADEMCO VISTA-100 Manuale utente

ADEMCO

ADEMCO VISTA Manuale utente

ADEMCO

ADEMCO Security System VISTA-10SE Istruzioni per il montaggio

ADEMCO

ADEMCO Vista-10P Istruzioni per il montaggio

ADEMCO

ADEMCO LYNXR Manuale utente

ADEMCO

ADEMCO LYNX Manuale utente

ADEMCO

ADEMCO LYNX Manuale utente

ADEMCO

ADEMCO Vista-128FB Manuale utente

ADEMCO

ADEMCO 4140XMP Manuale utente

ADEMCO

ADEMCO Alert II Manuale utente

ADEMCO

ADEMCO Vista-10 Manuale utente

ADEMCO

ADEMCO VISTA-20P Series Manuale utente

ADEMCO

ADEMCO 5600 Alert II Manuale utente

ADEMCO

ADEMCO 676 Manuale utente

ADEMCO

ADEMCO 4130XM Manuale utente

ADEMCO

ADEMCO 4180 Manuale utente

ADEMCO

ADEMCO VISTA 5140XM Manuale utente

ADEMCO

ADEMCO VISTA-128FBP Istruzioni operative

ADEMCO

ADEMCO Vista-20HW Manuale utente

ADEMCO

ADEMCO 4150 v3 Manuale utente

ADEMCO

ADEMCO via30+ Manuale utente

ADEMCO

ADEMCO VIA-30PSE Manuale utente

ADEMCO

ADEMCO 4160-12 C-COM Manuale utente

ADEMCO

ADEMCO VISTA Series Guida rapida

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente