Adena Rada Duo Manuale utente

RADA DUO
QUICK INSTALLATION GUIDE
CLIP, WALK AND
TALK WITH RADA DUO

RADA Duo is a lavalier wireless microphone de-
fined by its miniature and lightweight design,
high-quality audio, long battery life and precise
noise cancellation with LCF mode for especially
loud environments. Duo is focused on flexibility
and thus features clips on the receiver and trans-
mitters that can be attached to a jacket, shirt, or
belt.
The system relies on UHF wireless transmission
– it ensures outstanding signal stability and a
professional-level audio quality. RADA Duo is de-
signed as a dual-channel system, able to record
two microphone transmitters simultaneously, and
also supporting volume monitoring and adjust-
ment via hotkeys.
Duo is primarily designed for usage with AREC
Media Stations, allowing users to record present-
ers’ and guests’ voices. However, there are other
applications for it – you can also use it with cam-
eras and tablets, mobile devices, such as phones,
as well as PCs, AV audio mixers and other record-
ing and streaming devices.
RADA Duo Quick Installation Guide

WARNINGS
1. Some amount of ambient noise is unavoidable in particularly
noisy environments
2. Store in dry and clean place when not in use. Avoid storing in
hot and humid locations, as it can affect the product’s sensitivity
and tone
3. Avoid pulling by the cables and bumping them, since that can
cause the microphone sensitivity to drop or damage the cables.
4. Keep the devices dry and avoid touching them with wet hands.
RADA Duo is not waterproof, therefore do not expose it to rain or
water
PRECAUTIONS
1. Check that all cables are properly inserted when using the
devices
2. RADA Duo is equipped with rechargeable lithium batteries
that have a certain life limit as is normal for batteries. Over time
the maximum working hours will be reduced. You can take the
following steps to extend the battery life:
• Pull out the power cord after the device finishes charging.
• Fully discharge and fully recharge the batteries at least once
every three months

Product Package Includes
x1 Receiver
x2 Transmitter microphone
x1 TRRS to TRRS audio cable
x1 TRRS to TRS audio cable
x1 1-to-3 USB Type-C to USB A charging cable
x2 Lavalier microphones with clips
x2 Windshields for microphones
x1 Cold shoe mount for installation on cameras
x1 Carry bag

RADA Duo Transmitter Microphone
1. Transmission : UHF
2. Voltage : 3.7V lithium battery
3. Current : 100mA@3.8VDC
4. Microphone type : omni-directional
5. Frequency : 650~690MHz
6. Frequency stability : <15ppm
7. Transmission power level : 13dBm/3.8VDC
8. Frequency response : 50Hz~15K Hz
9. Operating distance : 50 meters, depending on the
environment
10. Battery capacity : 3.7V/480mAh
11. Time to full charge : 1.5 hours
12. Endurance rating : approximately 4 hours
13. Net weight : approximately 70g
14. Dimensions : 71mm X 37mm X 14mm

RADA Duo Receiver
1. Frequency : 650~690MHz
2. Frequency stability : < ± 15ppm
3. Distortion : < 0.5%
4. Audio Delay : < 2.5ms
5. Frequency response : 50Hz~15K Hz
6. Sensitivity : < -105dBm
7. Dynamic range : >85dB
8. Operating distance : 50 meters, depending on
the environment
9. Battery capacity : 3.7V/800mAh
10. Time to full charge : 2 hours
11. Endurance rating : approximately 6 hours
12. Net weight : approximately 86g
13. Dimensions: 62mm X 42mm X 16mm

1. Microphone
2. Microphone input : Designed for a 3.5 TRS connector
3. “+” Function key and coding key : Tap to increase
when configuring settings or press 3 times in a row to
enter coding mode
4. Power button and function key : Press for 2 seconds
to turn on or off or tap to scroll through customizable
settings
5. “–“ Function key : Tap to decrease when configuring
6. Charging port : Designed for USB Type-C, input 5V1A
3
1
2
4
5
6
Icon Description

6
1
2 3
4
5
7
Icon Description (Launcher TX)
1. TX transmitter icon
2. LCF (low cut filter) : Enable it when in a
particularly noisy environment
3. Battery charge indicator : Indicator flashes
when charging and stops when fully charged
4. Volume level : You can set it from 0 to 8
5. Frequency : 650 to 690 MHz are supported
6. Channel : 0 to 20 are available
7. Audio Frequency : Dynamically shows
audio level

12
3
4
5
6
Icon Description
1. Monitoring port : Designed for 3.5 TRS or TRRS
headphones
2. Audio output port : Connect to other devices for
audio recording via 3.5 TRRS connector
3. Volume “+” control key : When powered on, press
to increase volume
4. Power button / coding key : Press for 2 seconds to
turn on or off or press 3 times when powered on to
enter coding mode
5. Volume “-“ control key : When powered on, press
to decrease volume
6. Charging port : Designed for USB Type-C, input
5V1A

Icon Description (Receiver RX)
1
2
3
4
5
6
1. Signal strength
2. RX receiver icon
3. Battery charge indicator : Indicator flashes when
charging and stops when fully charged
4. Volume level : You can set it from 0 to 8
5. CHA (Channel A) and CHB (Channel B) indicators :
0 to 20 are available
6. Audio Frequency : Dynamically shows audio level
Indice

















