ADF Web HD67154-A1 Manuale utente

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31

User Manual

Ethernet

from/

DeviceNet

Master

Document code: MN67154_ENG Revision 1. Page 1 of 14

User Manual

Revision 1.

English

Gateway / Bridge

Ethernet from/to DeviceNet Master

(Order Code: HD67154-A1 – HD67154-B2)

for Website information:

www.adfweb.com?Product=HD67154

for Price information:

www.adfweb.com?Price=HD67154-A1

www.adfweb.com?Price=HD67154-B2

Benefits and Main Features:

Very easy to configure

Low cost

Rail mountable

Wide supply input range

Galvanic isolation between two buses

Industrial temperature range:

-3 °C / 7 °C (-22°F / 158°F)

For other DeviceNet products see also the following link:

DeviceNet Slave from/to

www.adfweb.com?Product=HD67 43 (Ethernet

www.adfweb.com?Product=HD67 58 (M-Bus

www.adfweb.com?Product=HD67134 (CANopen SDO Client

www.adfweb.com?Product=HD67136 (CANopen SDO Server

www.adfweb.com?Product=HD67137 (J1939

www.adfweb.com?Product=HD67138 (Modbus Slave

www.adfweb.com?Product=HD67139 (Modbus TCP Client

www.adfweb.com?Product=HD6714 (Modbus TCP Server

www.adfweb.com?Product=HD67141 (Modbus Master

www.adfweb.com?Product=HD67235 (CAN

www.adfweb.com?Product=HD67554 (PROFIBUS

DeviceNet Master from/to

www.adfweb.com?Product=HD67151 (Modbus Slave

www.adfweb.com?Product=HD67152 (Modbus TCP Server

www.adfweb.com?Product=HD67153 (CANopen

www.adfweb.com?Product=HD67555 (PROFIBUS

Do you have an your customer protocol? See the following link:

www.adfweb.com?Product=HD67 3

Do you need to choose a device? do you want help?

Ask it to the following link:

www.adfweb.com?Cmd=helpme

HD6715

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31

User Manual

Ethernet

from/

DeviceNet

Master

Document code: MN67154_ENG Revision 1. Page 2 of 14

INDEX:

Page

INDEX 2

UPDATED DOCUMENTATION 2

REVISION LIST 2

WARNING 2

TRADEMARKS 2

CONNECTION SCHEME 3

CHARACTERISTICS 5

CONFIGURATION 5

POWER SUPPLY 5

USE OF COMPOSITOR SW67154 6

NEW PROJECT / OPEN PROJECT 6

SET COMMUNICATION 7

DEVICENET NETWORK 8

UPDATE DEVICE 9

CHARACTERISTICS OF THE CABLES 1

ETHERNET PROTOCOL 11

MECHANICAL DIMENSIONS 13

ORDER CODE 13

ACCESSORIES 13

WARRANTIES AND TECHNICAL SUPPORT 14

RETURN POLICY 14

PRODUCTS AND RELATED DOCUMENTS 14

UPDATED DOCUMENTATION:

Dear customer, we thank you for your attention and we remind you that you

need to check that the following document is:

Updated

Related to the product you own.

To obtain the most recently updated document, note the “document code” that

appears at the top right-hand corner of each page of this document.

With this “Document Code” go to web page www.adfweb.com/download/ and

search for the corresponding code on the page. Click on the proper “Document

Code” and download the update.

To obtain the updated documentation for the product that you own, note the

“Document Code” (Abbreviated written "Doc. Code" on the label on the product)

and download the updated from our web site www.adfweb.com/download/

REVISION LIST:

Revision

Date Author

Chapter Description

1. 23/ 4/2 1 Fl All First release version

WARNING:

ADFweb.com reserves the right to change information in this manual about our

product without warning.

ADFweb.com is not responsible for any error this manual may contain.

TRADEMARKS:

All trademarks mentioned in this document belong to their respective owners.

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31

User Manual

Ethernet

from/

DeviceNet

Master

Document code: MN67154_ENG Revision 1. Page 3 of 14

CONNECTION SCHEME:

Figure 1: Connection scheme for HD67154-A1

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31

User Manual

Ethernet

from/

DeviceNet

Master

Document code: MN67154_ENG Revision 1. Page 4 of 14

Figure 2: Connection scheme for HD67154-B2

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31

User Manual

Ethernet

from/

DeviceNet

Master

Document code: MN67154_ENG Revision 1. Page 5 of 14

CHARACTERISTICS:

The Ethernet from/to DeviceNet Master Gateway allows the following characteristics:

Two-directional information between Ethernet and DeviceNet bus;

Electrical isolation between two buses;

Power supply of 8…19 VAC 4VA or 8…35 VDC 4W;

35mm Rail DIN mounting;

Temperature range -3 °C to 7 °C.

CONFIGURATION:

You need Compositor SW67154 software on your PC in order to perform the following:

Define the parameters of Ethernet;

Define the parameters of DeviceNet;

Define the DeviceNet Slave devices ;

Update the Firmware and/or the Project.

POWER SUPPLY:

Caution: Not reverse the polarity power.

Recommended Power Supply

VDC VAC

24 12

VDC VAC

Vmin Vmax Vmin Vmax

8v 35v 8v 19v

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31

User Manual

Ethernet

from/

DeviceNet

Master

Document code: MN67154_ENG Revision 1. Page 6 of 14

USE OF COMPOSITOR SW67154:

To configure the Gateway, use the available software that runs

with Windows, called SW67154. It is downloadable on the site

www.adfweb.com and its operation is described in this document.

When launching the SW67154 the right window appears (Fig. 3).

NEW PROJECT / OPEN PROJECT:

The “New Project” button creates the folder which contains the entire device configuration.

A device configuration can also be imported or exported:

To clone the configurations of a Programmable Ethernet to DeviceNet Master Gateway in order to configure another device in the

same manner, it is necessary to maintain the folder and all its contents;

To clone a project in order to obtain a different version of the project, it is sufficient to duplicate the project folder with another name

and open the new folder with the button “Open Project”.

Figure 3

: Main window for SW67

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31

User Manual

Ethernet

from/

DeviceNet

Master

Document code: MN67154_ENG Revision 1. Page 7 of 14

SET COMMUNICATION:

This section defines the fundamental communication parameters of two buses Ethernet and

DeviceNet.

By pressing the “Set Communication” button from the main window for SW67154 (Fig. 3) the “SET

COMMUNICATION” window appears (Fig. 4).

This window is divided in two sections, one for the DeviceNet and the other for the Ethernet.

The means of the fields for the “DeviceNet Master” section are:

In the “ID Dev.” field the Gateway address of the DeviceNet is defined.

In the “Baud rate” field the DeviceNet baud rate is defined.

The means of the fields for “Ethernet” are:

In the field “IP Address” insert the IP address;

In the field “Subnet Mask” insert the Subnet Mask;

If the field “Gateway” is checked in the fields under it is possible to insert the IP address

used for going out to the net;

In the field “Port” insert the number of the port;

If the field “TCP” is checked, the Ethernet protocol used is the TCP, otherwise if the field

“UDP” is checked the Ethernet protocol used is the UDP.

Figure 4

“Set Communication”

window

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31

User Manual

Ethernet

from/

DeviceNet

Master

Document code: MN67154_ENG Revision 1. Page 8 of 14

DEVICENET NETWORK:

By pressing the “DeviceNet Network” button from the main window for SW67154 (Fig. 3) the window “DeviceNet Network” appears (Fig. 5).

Here it is possible to define the Slaves DeviceNet Devices with their ID, number of Input and number of Output bytes.

The data of the columns have the following meanings:

In the field “ID” the ID of a slave DeviceNet device is defined;

In the field “N BYTE IN” the number of input byte of the slave DeviceNet is defined;

In the field “N BYTE OUT” the number of output byte of the slave DeviceNet is defined;

In the field “Mnemonic” is possible to insert a description. It isn’t necessary compiling this field, is only a label.

Figure 5: “Set Access

” window

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31

User Manual

Ethernet

from/

DeviceNet

Master

Document code: MN67154_ENG Revision 1. Page 9 of 14

UPDATE DEVICE:

Section “Update Firmware” (Fig. 6):

In order to load the parameters or update the firmware in the device, follow these instructions:

Turn off the Device;

Connect the Null Modem Cable form your PC to the Gateway;

Insert the Boot Jumper (For more info see Fig. 1 or Fig. 2);

Select the COM port and press the “Connect” button;

Turn on the device;

Check the BOOT Led. It must blink quickly (For more info see Fig. 1 or Fig. 2);

Press the “Next” button;

Select which operations you want to do.

Press the “Execute update firmware” button to start the upload;

When all the operations are “OK” turn off the device;

Disconnect the Boot jumper;

Disconnect the RS232 Cable;

Turn on the device.

At this point the configuration/firmware on the device is correctly update.

Note:

When you install a new version of the software it is better if the first time

you do the update of the Firmware in the HD67154-xx device.

Warning:

If the Fig. 7 appears when you try to do the Update before require

assistance try these points:

Check if the serial COM port selected is the correct one;

Check if the serial is connected between the PC and the device;

Try to repeat the operations for the updating;

If you are using a dongle try with a native COM port or change the dongle;

Try with another PC.

Figure 7: “ rotection” window

Figure

“

Update Device

” windows

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31

User Manual

Ethernet

from/

DeviceNet

Master

Document code: MN67154_ENG Revision 1. Page 1 of 14

CHARACTERISTICS OF THE CABLES:

THERNET

The connection at Ethernet socket must be with a Ethernet Cable with a RJ45 plug.

232:

The connection from RS232 socket to a serial port (example one from a personal computer) must be made with a NULL MODEM cable (a serial

cable where the pins 2 and 3 are crossed).

It is recommended that the RS232C Cable not exceed 15 meters.

Figure 8: Null modem cabling

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ADF Web Portale

ADF Web

ADF Web HD67F41-B2 MHz Series Manuale utente

ADF Web

ADF Web HD67F33-B2 Series Manuale utente

ADF Web

ADF Web KNX Manuale utente

ADF Web

ADF Web HD67412-E Series Manuale utente

ADF Web

ADF Web HD67E23-A1 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente