ADJ LINK Manuale utente

iPad not included

©2021 ADJ PRODUCTS LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are
subject to change without notice. ADJ logo and identifying product names and numbers herein are trademarks of ADJ
PRODUCTS LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and in- formation
now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks
or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ brands and product
names are trademarks or registered trademarks of their respective companies.
ADJ PRODUCTS LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent
assembly, installation, rigging, and operation of this product.
ADJ PRODUCTS LLC USA
6122 S. Eastern Ave. Los Angeles, CA 90040
ADJ SUPPLY Europe B.V
Junostraat 2 6468 EW Kerkrade, The Netherlands
ADJ PRODUCTS GROUP Mexico
AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
DOCUMENT VERSION
Due to additional product features and/or enhancements, an updated version
of this document may be available online, along with an App Manual, and or
other supplementary documents.
Please check www.adj.com for the latest revision/update of this user guide, or
to download the App Manual before beginning installation, and/or
programming.
Date Document Version Notes
12/02/20 1 Initial Release
02/25/21 1.5 Updated Specifications

3
CONTENTS
General Information 4
Limited Warranty 5
Safety Guidelines 6
Overview 7
Faders 8
Matrix Page 9
Matrix Buttons 9
App Shortcut Buttons 10
Jog Wheels 10
Master Fader and Blackout Button 11
USB LED Light 12
Rear Panel 13
Connecting to the Link Controller 14
Rack Mounting Hardware 15
Firmware Updates 16
Technical Specifications 17

4
GENERAL INFORMATION
INTRODUCTION
Please read and understand the instructions in this manual carefully and thoroughly before attempting
to operate this device. These instructions contain important safety and use information.
UNPACKING
Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during shipping. If the carton is damaged,
carefully inspect the device for damage, and be sure all accessories necessary to install and operate
the device have arrived intact. In the event damage has been found or parts are missing, please contact
our customer support team for further instructions. Please do not return this device to your dealer
without first contacting customer support. Please do not discard the shipping carton in the trash. Please
recycle whenever possible.
BOX CONTENTS
USB Cable
USB Light
DC9V Power Supply
Rack Mount Kit
CUSTOMER SUPPORT
Contact ADJ Service for any product related service and support needs.
Also visit forums.adj.com with questions, comments or suggestions.
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

5
LIMITED WARRANTY
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of
manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific
warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States
of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of
purchase by acceptable evidence, at the time service is sought.
B. For warranty service, you must obtain a Return Authorization number (RA#) before sending the product back—
please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ
Products, LLC factory. All shipping charges must be prepaid. If the requested repairs or service (including parts
replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a
designated point within the United States. If the entire instrument is sent, it must be shipped in its original package
and packaging material. No accessories should be shipped with the product. If any accessories are shipped with
the product, ADJ Products, LLC shall incur no liability whatsoever for loss of or damage to any such accessories,
nor for the safe return thereof.
C. This warranty is void if the product serial number and/or labels are altered or removed; if the product is modified
in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the
product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written
authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because it was not
properly maintained as set forth in the product instructions, guidelines and/or user manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning, or periodic checkup.
During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or
refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in
material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the
repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All
products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that
effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without
any obligation to include these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products
described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products,
LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the
warranty period set forth above. And all warranties, whether expressed or implied, including warranties of
merchantability or fitness, are limited in duration to the warranty period set forth above. The consumer’s and/or
dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no
circumstances shall ADJ Product, LLC be liable for any loss and/or damage, direct and/or consequential arising
out of the use of, and/or inability to use this product.
G. This warranty is the only written warranty applicable to ADJ Products, LLC products, and supersedes all prior
warranties and written descriptions of warranty terms and conditions heretofore published.
MANUFACTURER’S LIMITED WARRANTY PERIODS:
Non-LED Lighting Products = 1-Year (365 Days) (Including Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog
Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, Power/Data Distribution, etc. excluding LED and lamps)
Laser Products = 1-Year (365 Days) (excluding laser diodes which have a 6-Month Limited Warranty)
LED Products = 2-Year (730 Days) (excluding batteries which have a 180 Day Limited Warranty)
NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to product purchased within the United States.
StarTec Series = 1-Year (365 Days) (excluding batteries which have a 180 Day Limited Warranty)
ADJ DMX Controllers = 2 Year (730 Days)
American Audio Products = 1 Year (365 Days)
CUSTOMER SUPPORT INFORMATION
Contact ADJ Service for any product related service and support needs.
Also visit forums.adj.com with questions, comments or suggestions.
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

6
SAFETY GUIDELINES
This device is an extremely sophisticated piece of electronic equipment. To guarantee a smooth
operation, it is important to follow the guidelines in this manual. The manufacturer of this device will not
accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the
information printed in this manual.
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS DEVICE.
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR
MANUFACTURES WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO
THIS PANEL AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES
IN THIS MANUAL VOID THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT
TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE DEVICE TO RAIN AND/OR MOISTURE!
DO NOT SPILL WATER AND/OR LIQUIDS ON OR INTO THE DEVICE!
DO NOT operate this device if any cover is open and/or removed.
DO NOT shake device, avoid brute force when installing and/or operating device.
DO NOT expose any part of the device to open flame or smoke. Keep it away from heat sources such
as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
DO NOT use device in extreme hot/humid environments, or handle without ESD precautions.
DO NOT operate device if power cord is frayed, crimped, damaged and/or if any of the power cord
connectors are damaged and do not insert into the panel securely with ease. NEVER force a power
cord connector into the device. If the power cord or any of its connectors are damaged, replace it
immediately with a new one of similar power rating.
ALWAYS disconnect device from main power source before performing any type of service and/or
cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by tugging the
wire portion of the cord.

7
OVERVIEW
LINK is a 4-DMX 512 universe lighting controller for controlling compatible DMX devices using the
dedicated LINK App for iPad available on the Apple store (free app).
LINK creates a private standalone 2.4 or 5 GHz Wi-Fi network, which coexists in busy RF environments
alongside other wireless technologies. No existing network infrastructure is required.
LINK is ideal for small production events, nightclubs, bars or any event or venue which requires the
flexibility of wireless iPad control, and who are looking for a robust, 4 DMX universe APP based lighting
control solution.
LINK App compatibility:
Compatible with iPad only. Requires iOS 12 or later. *iPad NOT included.
FADERS:8 faders each with 1 rotary push-in style knob, 2 buttons and fader scroll left/right buttons.
MASTER FADER and BLACKOUT BUTTON: Located in the center of the controller.
SHORTCUTS: 6 shortcut buttons located above the playback buttons for selecting app views on the IPad, and
5 general purpose shortcut buttons located above the 4 jog wheels.
MATRIX BUTTONS: 32 matrix buttons and matrix page select buttons and a display.
JOG WHEELS: There are 4 large wheels for control of lighting parameters. The wheels are also push buttons
that allow you to press in on the wheel for additional functions.

8
FADERS
The fader section is used for fixture channel control or for scene sub-masters.
The rotary knobs above each fader are used for fine control when controlling channel levels and as
effect speed controls when used as sub-masters.
The fader buttons are used to add or subtract channels when in channel mode or as scene buttons
when in sub-master mode. There is an LED in the top button to show active channels or sub-masters.

9
MATRIX PAGE
The 32 matrix buttons correspond to the views on the IPad app that use buttons, for example fixture
selection or scene selection. The page control allows you to change button pages.
MATRIX BUTTONS
These 32 buttons can be used to call lighting effects, scenes, colors, etc. and correspond to the views
in the Link app that use buttons.
The 32 matrix buttons can be paged using the page controls to their upper left.

10
APP SHORTCUT BUTTONS
These 11 buttons are intended for frequently used functions in the Link app.
JOG WHEELS
The jog wheels are uses throughout the app for controlling various functions and features.
Indice
Altri manuali ADJ Attrezzatura per DJ

ADJ
ADJ ECO UV BAR PLUS IR Manuale utente

ADJ
ADJ AV6XS Manuale utente

ADJ
ADJ Vizi Q Wash7 Manuale utente

ADJ
ADJ MOD TWIOO Manuale utente

ADJ
ADJ COB CannOn Wash DW Manuale utente

ADJ
ADJ MOD QW100 Manuale utente

ADJ
ADJ SCENE SETTER 48 Manuale utente

ADJ
ADJ 3D Vision Manuale utente

ADJ
ADJ PinPoint Gobo COLOR Manuale utente

ADJ
ADJ LTS COLOR Manuale utente

ADJ
ADJ ENCORE BURST UV IP Manuale utente

ADJ
ADJ HYDRO WASH X7 Manuale utente

ADJ
ADJ Vizi BSW 300 Manuale utente

ADJ
ADJ XPress LED Manuale utente

ADJ
ADJ Vision Series Manuale utente

ADJ
ADJ 15 HEX BAR IP Manuale utente

ADJ
ADJ FREQ Matrix Manuale utente

ADJ
ADJ ELEMENT Series Manuale utente

ADJ
ADJ EVS3 Manuale utente

ADJ
ADJ 18P HEX IP Manuale dell'operatore





















