Adlens VR ProOptics Manuale utente
Installation and removal guide
for Oculus™Quest 2
AD-OCQU-02
1. Remove the fabric eye shroud from the around
the back of the headset. This will allow you to easily
install the prescription lens inserts into your headset.
2. Select an insert to install, you can identify each lens by
the L & R markings on the outer edge.
Be sure to match up the correct insert with the correct
headset lens as they are customised for each eye.
RIGHTLEFT
3. First of all, orientate and align the insert to headset lens.
2. Select an insert to install, you can identify each lens by
the L & R markings on the outer edge.
Be sure to match up the correct insert with the correct
headset lens as they are customised for each eye.
3. First of all, orientate and align the insert to headset lens.
4. Once aligned, using the outer edge, rmly press the
insert onto the matching headset lens, this will securely
seat the insert onto the lens.
Try to avoid pressing down directly onto the lens itself.
5. Repeat, with the other lens insert.
6. Now replace the fabric eye shroud back onto
your headset.
5. Repeat, with the other lens insert.
7. Your Adlens VR ProOptics Lens Inserts are now installed.
Ready for you to enjoy improved optical performance,
comfort and immersion.
Removing the lens insert from the headset.
Using the diagram below (Fig.A), position your forenger
and thumb at the two points indicated.
1 2
Hold the headset rmly with one hand and place your
thumb or forenger on the undercut in Position 1 then
lever upwards until it unclips. Repeat with the other insert.
Be careful not to touch the lens surface.
Fig.A
Optional step.
Some users may want to use the spacer for extra space within
the headset. For further guidance on how install the spacer,
please refer to your original Oculus Quest 2 documentation.
If you have purchased the Quest 2 Fit Pack. Please note, that you will
no longer will be able to install the Light Blocker adapters into your
Quest 2 headset once you have tted your Adlens VR ProOptics.
Questo manuale è adatto per i seguenti modelli
1
Altri manuali Adlens Occhiali 3D
