ADS FLASHLOGIC FLRSBZ1 Manuale utente
REVISION DATE
20211012
DOCUMENT NUMBER
TERMS OF USE: Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by
Certified Technicians who are employed by a registered business specialized in the installation of auto-
motive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle,
it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide
and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever,
including but not limited to any consequential damages, incidental damages, damages for loss of time,
loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or
may not have resulted from the use, misuse, improper installation or operation of its products. ADS
reserves itself the right to suspend any Weblink® account without notice and decline to offer technical
support to non-Certified Technicians, non-compliant Certified Technicians or end users.
BEFORE INSTALLATION
1- Connect module to computer
2- Login to Weblink account
3- Flash firmware to module (module is not preloaded with firmware)
4- Use accessories accordingly (accessories are sold separately)
Patent No. US 8,856,780 CA 2759622
INSTALL GUIDE
OEMIDSRSBZ1AFLRSBZ1EN
HARDWARE
FLRSBZ1
ACCESSORIES
FLPROG REQUIRED
ADSTOOLSMB01 OPTIONAL
FIRMWARE
OEMIDSRSBZ1AFLRSBZ1
www.flashlogic.comAutomotive Data Solutions Inc. © 2021
77322
Patent No. US 8,856,780 CA 2759622
VEHICLE LIST - 1 OF 1
MAKE
MODEL
YEAR
INSTALL TYPE
FEATURES
3X LOCK START/STANDALONE MOD.
SECURE TAKEOVER
DATA IMMOBILIZER BYPASS
ARM OEM ALARM
DISARM OEM ALARM
DOOR LOCK
DOOR UNLOCK
PRIORITY UNLOCK
POWER LIFTGATE
PARKING LIGHT CTRL
HEATED SEATS CTRL
VENTILATED SEATS CTRL
RAP SHUTDOWN CTRL
TACHOMETER STATUS MONITORING
BRAKE PEDAL STATUS MONITORING
VSS STATUS MONITORING
GLOW PLUG STATUS MONITORING
DOOR STATUS MONITORING
TRUNK STATUS MONITORING
HOOD STATUS MONITORING*
MERCEDES-BENZ
GL Class PTS AT 07-12 2 • • • • • • • • • • • • • • • • • • •
GL Class STD key AT 07-12 1 • • • • • • • • • • • • • • • • • • •
GL Class Diesel PTS AT 07-12 2 • • • • • • • • • • • • • • • • • • • •
GL Class Diesel STD key AT 07-12 1 • • • • • • • • • • • • • • • • • • • •
ML Class PTS AT 06-11 2 • • • • • • • • • • • • • • • • • • •
ML Class STD key AT 06-11 1 • • • • • • • • • • • • • • • • • • •
ML Class Diesel PTS AT 06-11 2 • • • • • • • • • • • • • • • • • • • •
ML Class Diesel STD key AT 06-11 1 • • • • • • • • • • • • • • • • • • • •
R Class PTS AT 06-12 2 • • • • • • • • • • • • • • • • • • •
R Class STD key AT 06-12 1 • • • • • • • • • • • • • • • • • • •
R Class Diesel PTS AT 06-12 2 • • • • • • • • • • • • • • • • • • • •
R Class Diesel STD key AT 06-12 1 • • • • • • • • • • • • • • • • • • • •
* If equipped with a factory hood switch.
NOTES
I This fi rmware covers Automatic Trans-
mission (AT) vehicles only.
II All the covered Push To Start (PTS)
vehicles are equipped with a keyless
authorization system called "Keyless
Go".
www.flashlogic.comAutomotive Data Solutions Inc. © 2021 OEMIDSRSBZ1AFLRSBZ1EN
PAGE 2 OF 21
• 20211012
DOC.: #77322
Patent No. US 8,856,780 CA 2759622
www.flashlogic.comAutomotive Data Solutions Inc. © 2021 OEMIDSRSBZ1AFLRSBZ1EN
PAGE 3 OF 21
• 20211012
BOX CONTENTS - 1 OF 1
21 3 4
2
1
3
21 3
42 8
1 3 5 7
10
9
6
7
9
3
10
8
11
13
14
12
15
17
18
19
20
16
6
4
1
2
5
3
6
4
1
2
5
3
6
4
1
2
5
2
1
3
4
42 8
1 3 5 7
10
9
6
7
9
3
10
8
6
4
12
5
2
1
2
1
3
4
2
1
3
4
2
1
3
4
7
9
3
10
8
11 12
6
4
12
5
MODULE
BOX CONTENTS
T-HARNESS 1
2 PIN BLACK CONNECTOR
AFTERMARKET HOOD SWITCH AND CABLE
STICKER 1
EXPANSION PACK
STICKER 2
EXTRA CONNECTOR HOUSING
10 PIN WHITE CONNECTOR
12 PIN BLACK CONNECTOR
PROGRAMMING
BUTTON
LED 1 LED 2
LED LED
RED
BLUE
BLACK
BLACK
RF PORT/WEBLINK PORT
BLACK
BLUE
BLACK
BLACK
TOP VIEW TOP VIEWBOTTOM VIEW
BLACK
USB
BLUE
TELEMATIC
PORT
WHITE
BLACK
EXPANSION PACK ASSEMBLY
BLUE
BLACK
BLACK
XP LED 1 XP LED 2
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
COMPUTER
USB PORT
4 PIN BLACK CABLE
ELECTRONIC IGNITION SWITCH REMOVAL TOOL (accessory sold separately)
IGNITION
SWITCH
ADS-TOOLS-MB01 OR
MERCEDEZ BENZ P/N 639 589 01 07 00
MODULE
WEBLINK PORT
DOC.: #77322
Patent No. US 8,856,780 CA 2759622
TECHNICAL NOTE - 1 OF 1
IMPORTANT INSTALL VIDEO GALLERY AVAILABLE ONLINE
Before installing this product, consult our Install Video Gallery and watch:
• Vehicle Disassembly Procedure videos
• Module Connection Procedures videos
• Module Programming Procedures videos
To access the videos, simply log in your Weblink user account,
and click on "Install videos" under the "Support" tab.
Then, select a vehicle make, year and model to display the available videos.
Æ
Æ
www.flashlogic.comAutomotive Data Solutions Inc. © 2021 OEMIDSRSBZ1AFLRSBZ1EN
PAGE 4 OF 21
• 20211012
DOC.: #77322
Patent No. US 8,856,780 CA 2759622
A
B
COMPONENT LOCATOR - 1 OF 1
INTERIOR VIEW
DRIVER SIDE VIEW PASSENGER SIDE VIEW
www.flashlogic.comAutomotive Data Solutions Inc. © 2021 OEMIDSRSBZ1AFLRSBZ1EN
PAGE 5 OF 21
• 20211012
DOC.: #77322
Patent No. US 8,856,780 CA 2759622
01
ENGINE
START
STOP
OFF ACC ON STARTSTART
START
02
ENGINE
START
STOP
OFF ACC ON STARTOFF
03
04
05
06
07
08
ENGINE
START
STOP
OFF ACC ON STARTSTART
START
09
10
ENGINE
START
STOP
OFF ACC ON STARTOFF
11
12
13
14
RF
15
16
17
MODULE INSTALLATION PROCEDURE - 1 OF 1
START the vehicle. Verify all vehicle
functionalities. If the vehicle displays error
messages or any malfunction: stop the
installation and service the vehicle.
Turn OFF the vehicle.
Verify all keyfob functionalities (Door Lock,
Door Unlock, Trunk Release and RFID access
if equipped).
Insert the expansion pack in the module.
Connect the module to the computer with the
programming cable (WEBLINK port). Flash
the module with the latest firmware then flash
the expansion pack.
Connect and secure every connector to the
vehicle, as shown in STEP 1 of the WIRING
DIAGRAM.
WARNING: Any vehicle harness that is
disconnected during installation, must be
re-connected before performing any system
tests. Failure to comply will result in vehicle
displaying error messages. An OEM scantool
will be required to clear the error messages.
START the vehicle. Verify all vehicle
functionalities.
WARNING: If the vehicle displays error
messages or any malfunction, stop the
installation, verify every connection and if the
problem persists, call technical support.
Turn OFF the vehicle.
Connect every connector to the module, as
shown in STEP 2 of the WIRING DIAGRAM.
Connect every other connector to the module,
as shown in STEP 3 of the WIRING DIAGRAM.
If the vehicle is not equipped with a factory
hood switch, install an aftermarket hood
switch as shown in STEP 4 of the WIRING
DIAGRAM.
If required, connect a compatible RF Kit to the
RF port of the module.
If required, connect a compatible Telematics
Device to the TELEMATIC port of the module.
Put sticker 1 on a clean and visible surface
in the engine bay and put sticker 2 under the
dashboard near the OBDII connector.
Module installation procedure completed.
www.flashlogic.comAutomotive Data Solutions Inc. © 2021 OEMIDSRSBZ1AFLRSBZ1EN
PAGE 6 OF 21
• 20211012
DOC.: #77322
Patent No. US 8,856,780 CA 2759622
TYPE 1 - WIRING DIAGRAM - 1 OF 1
CONNECT TO VEHICLE
START VEHICLE WITH OEM KEYFOB TO TEST CONNECTIONS
STEP 1
MODULE
07 GRAY/WHITE - HOOD STATUS (-) INPUT
08 GRAY/BLACK (NOT USED)
BLACK 20 PIN
BLACK 6 PIN
BLACK 6 PIN
WHITE 6 PIN
WHITE 6 PIN
BLUE 6 PIN
BLACK 10 PIN
WHITE 10 PIN
1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4
2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1
IF NOT EQUIPPED
WITH AN OEM HOOD SWITCH,
INSTALL AN AFTERMARKET HOOD SWITCH
CONNECT TO MODULE
RELAY
B (VEHICLE HARNESS)
A (VEHICLE HARNESS)
B
A
STEP 2
WARNING
CONNECT TO MODULE
CONNECT IF REQUIRED
HOOD SWITCH
STEP 3
STEP 4
BLACK 2 PIN (NOT USED)
IGNITION SWITCH
www.flashlogic.comAutomotive Data Solutions Inc. © 2021 OEMIDSRSBZ1AFLRSBZ1EN
PAGE 7 OF 21
• 20211012
DOC.: #77322
Patent No. US 8,856,780 CA 2759622
TYPE 2 - WIRE CHART - 1 OF 1
MAKE
MODEL
YEAR
WIRE
DESCRIPTION
CONNECTOR
NAME
CONNECTOR
COLOR
CONNECTOR
TYPE
POSITION
WIRE
COLOR
POLARITY
MODULE
LOCATION
COMPONENT
LOCATOR
MERCEDES-BENZ
GL Class PTS AT 07-12 CanH ~ Black 02 pin 01 Brown/Red (DATA) Trunk, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Trunk, passenger side A
GL Class Diesel PTS AT 07-12 CanH ~ Black 02 pin 01 Brown/Red (DATA) Trunk, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Trunk, passenger side A
ML Class PTS AT 06-11 CanH ~ Black 02 pin 01 Brown/Red (DATA) Passenger kick panel B
CanL ~ Black 02 pin 02 Brown (DATA) Passenger kick panel B
ML Class Diesel PTS AT 06-11 CanH ~ Black 02 pin 01 Brown/Red (DATA) Passenger kick panel B
CanL ~ Black 02 pin 02 Brown (DATA) Passenger kick panel B
R Class PTS AT 06-12 CanH ~ Black 02 pin 01 Brown/Red (DATA) Passenger kick panel B
CanL ~ Black 02 pin 02 Brown (DATA) Passenger kick panel B
R Class Diesel PTS AT 06-12 CanH ~ Black 02 pin 01 Brown/Red (DATA) Passenger kick panel B
CanL ~ Black 02 pin 02 Brown (DATA) Passenger kick panel B
www.flashlogic.comAutomotive Data Solutions Inc. © 2021 OEMIDSRSBZ1AFLRSBZ1EN
PAGE 8 OF 21
• 20211012
DOC.: #77322
Patent No. US 8,856,780 CA 2759622
TYPE 2 - WIRING DIAGRAM - 1 OF 2
CONNECT TO VEHICLE
START VEHICLE WITH OEM KEYFOB TO TEST CONNECTIONS
STEP 1
MODULE
07 GRAY/WHITE - HOOD STATUS (-) INPUT
08 GRAY/BLACK (NOT USED)
BLACK 2 PIN
BLACK 20 PIN
BLACK 6 PIN
BLACK 6 PIN
WHITE 6 PIN
WHITE 6 PIN
BLUE 6 PIN
BLACK 10 PIN
WHITE 10 PIN
1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4
2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1
IF NOT EQUIPPED
WITH AN OEM HOOD SWITCH,
INSTALL AN AFTERMARKET HOOD SWITCH
CONNECT TO MODULE
RELAY
B (VEHICLE HARNESS)
A (VEHICLE HARNESS)
B
A
STEP 2
WARNING
CONNECT TO MODULE
CONNECT IF REQUIRED
HOOD SWITCH
STEP 3
STEP 4
01 PINK/RED - CANH
02 PINK/BLACK - CANL
CAN JUNCTION CONNECTOR
CAN CONNECTORS
C1
01 CANH
02 CANL
SEE MODULE PROGRAMMING PROCEDURE - PTS
TO IDENTIFY THE REQUIRED CAN CONNECTOR.
ONCE IDENTIFIED, DISCONNECT IT FROM THE CAN
JUNCTION CONNECTOR AND CONNECT IT TO C1.
REFER TO WIRE CHART
REFER TO COMPONENT LOCATOR
IF THE REQUIRED CAN CONNECTOR DOES NOT FIT IN C1:
SEE NEXT PAGE FOR INSTRUCTIONS
CONNECT CONNECT
IGNITION SWITCH
www.flashlogic.comAutomotive Data Solutions Inc. © 2021 OEMIDSRSBZ1AFLRSBZ1EN
PAGE 9 OF 21
• 20211012
DOC.: #77322
Patent No. US 8,856,780 CA 2759622
01 - CANH
02 - CANL
TYPE 2 - WIRING DIAGRAM - 2 OF 2
1- RELEASE RETAINING CLIP OF CAN CONNECTOR.
REMOVE CAN WIRES FROM HOUSING.
2- RELEASE LOCKING MECHANISM.
3- INSERT EMPTY HOUSING IN CAN JUNCTION CONNECTOR
(TO AVOID LOSING IT).
4- INSERT CAN WIRES IN PROVIDED HOUSING.
CONNECT IT WITH C1 HARNESS,
AS SHOWN IN WIRING DIAGRAM.
INSTRUCTIONS TO CHANGE THE HOUSING OF CAN WIRES
(ONLY IF THE CAN CONNECTOR DOES NOT FIT IN C1)
www.flashlogic.comAutomotive Data Solutions Inc. © 2021 OEMIDSRSBZ1AFLRSBZ1EN
PAGE 10 OF 21
• 20211012
DOC.: #77322
Indice
Altri manuali ADS Avviamento remoto
ADS
ADS TR1150AK Manuale utente
ADS
ADS OL-RS-CH4 Manuale utente
ADS
ADS TR4650A Manuale utente
ADS
ADS AKX-GM7 Manuale utente
ADS
ADS FlashLogic VWX Manuale utente
ADS
ADS TR2450A Manuale utente
ADS
ADS Firstech FT-GM7-DC Manuale utente
ADS
ADS TR1150A Manuale utente
ADS
ADS TR2350AK Manuale utente
ADS
ADS FlashLogic FLRSCH7 Manuale utente
ADS
ADS TR2410ATL Manuale utente
ADS
ADS FIRSTECH START IT DC3 Manuale utente
ADS
ADS FlashLogic FLRSBA Manuale utente
ADS
ADS OL-RS-CH4 Manuale utente
ADS
ADS FLRSBA Manuale utente
ADS
ADS FLASHLOGIC FLRSCH4 Manuale utente
ADS
ADS iDatastart HC1151A Manuale utente
ADS
ADS TR2350AC Manuale utente
ADS
ADS FLASHLOGIC FLRSVW1 Manuale utente
ADS
ADS ADS-BM1 Manuale utente
