ADT DSC Impassa Manuale utente

DSC Impassa Quick Guide

https://alpha.adt.com/help/15.html[11/8/2018 11:25:05 PM]

DSC Impassa - Quick Guide

For a detailed review of the entire system, please view the DSC Impassa manual.

« Help Center

Arm &

Disarm the

System

Battery Bypass

Protected

Areas

Date &

Time

Settings

Chimes &

Beeps

Reset Security

Codes

Trouble

Conditions

Volume

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold [AWAY].

To arm all sensors in STAY mode when you are not leaving the premises, press and hold [STAY] +

[security code].

To Quick Arm, press [*] + [0]. To enable or disable the Quick Arm feature on your device, enter [*] +

[9] + [Master Code] + [4].

Disarm:

Select

DSC Impassa Quick Guide

https://alpha.adt.com/help/15.html[11/8/2018 11:25:05 PM]

To disarm, enter your [security code].

For more information on this topic please visit the complete DSC Impassa manual.

Battery

The DSC Impassa operates on a 7.2V 3.6Ah battery which is only available through select retailers.

We recommend searching online or calling ahead to your local battery dealer to confirm availability.

Loss of AC power and use of backup battery power is indicated by "Loss of AC Power."

A low battery condition is indicated by "Service Required."

For more information on this topic please visit the complete DSC Impassa manual.

Bypass Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, press [*] to enter the function menu.

Press [1] or [*], then your [security code].

Enter the two digit number of the zone to be bypassed or use the [<>] keys to find the zone.

Press [*] to select a zone.

To exit bypassing mode and return to Ready state, press [#].

To unbypass a zone, simply arm and disarm your system.

For more information on this topic please visit the complete DSC Impassa manual.

Change Date and Time

Press [*] + [6] + [Master security code] to enter the programming menu.

Use [<>] to find [Time and Date Programming], then press [*].

Enter the time in 24-hour format, i.e., 16:30 for 4:30pm.

Enter the date in MM:DD:YY format, i.e., 03/02/15 for March 2, 2015.

Press [#] to exit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected

door/window is opened.

To turn the door chime function on or off, press and hold the [Chime] key for two seconds or press

[*] + [4].

DSC Impassa Quick Guide

https://alpha.adt.com/help/15.html[11/8/2018 11:25:05 PM]

For more information on this topic please visit the complete DSC Impassa manual.

Reset

To clear the display after an alarm event, first press [*] + [3] to view the event.

To clear the event history, arm, and then disarm your system with your [security code].

To clear the display after a fire alarm, press [*] + [7] + [2], or Arm then Disarm.

Trouble Condition alarms will clear from the display when the condition no longer exists.

Security Codes

You can program up to 16 additional user codes and attributes. Additional users will be restricted to

arming and disarming functions, while the Master user code can perform all functions.

To change the Master Code, press [*][5][Current Master Code][40][New 4 or 6 digit Master Code]

[#].

To program a new user:

1. Press [*] + [5] + [Master Code].

2. Enter the two-digit user number/slot to be programmed (01-16), or use the [<][>] to find

the desired user number/slot and press [*] to select.

3. Enter the new user’s new 4 or 6 digit access code.

4. Continue adding additional user codes or press [#] to exit.

To erase an access code, press [*][5][Master Code][2-digit user number/slot (01-16)][*][#].

User Attributes

To assign additional attributes to a user code:

1. Press [*][5][Master or Supervisor][9]

2. Enter the [2=digit user number/slot] OR use [<][>] to find the desired user number/slot

and press [*] to select.

3. Use [<][>] to scroll to the attribute you want to program and press [*] to toggle on/off OR

enter [Attribute Number] to toggle on/off.

Some user numbers have been pre-programmed:

Attribute Explanation Attribute

Number

Supervisor Similar to Master Code. [1]

Duress

Secretly notifies the monitoring center of duress. Intended for use only when

you are forced to arm or disarm the system against your will. [2]

DSC Impassa Quick Guide

https://alpha.adt.com/help/15.html[11/8/2018 11:25:05 PM]

Return to Top

Zone

Bypassing Can manually bypass zones and arm/disarm the system. [3]

Onetime

User Code Can disarm the system once per day. Reset daily at midnight. [8]

For a complete list of User Code Attributes please see the DSC Impassa manual.

Trouble Conditions

Your security system is able to automatically test itself for power failures, low batteries, nonworking

sensors, and communication troubles with the central monitoring station. When a trouble condition is

detected, the trouble indicator will turn on and the keypad will beep every 10 seconds. Press [*] and [2]

to view the trouble condition. The trouble indicator will flash. Use the [<] [>] keys to view troubles.

To silence trouble beeps, press [#].

For a complete list of Trouble Conditions, please refer to the DSC Impassa Troubleshooting page.

Volume

The buzzer provides audible confirmation that a command to the panel has been executed.

The buzzer has 21 different levels of volume.

To adjust the buzzer level, press [*] + [6] + [Master code].

Use the [<>] buttons to scroll to [Buzzer Control], then press [*] to select.

Use the [<>] to scroll to the desired level, then press [#] to exit.

To disable the buzzer, choose level [00].

Indice

Altri manuali ADT Sistema di sicurezza

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Istruzioni per il montaggio

ADT

ADT NT9005 V1.0 NA Manuale utente

ADT

ADT PowerSeries SCW9045-433 Manuale utente

ADT

ADT iCenter 8142ADT Manuale utente

ADT

ADT SA10ADTEG Manuale utente

ADT

ADT BHS-4000A Manuale utente

ADT

ADT 3G Cellular Medical Alert System Manuale utente

ADT

ADT Safewatch Quick Connect Plus Manuale utente

ADT

ADT SASW3000EN Manuale utente

ADT

ADT SafeWatch 3000 Manuale utente

ADT

ADT ADTHYBWL Series Manuale utente

ADT

ADT Safewatch Pro 3000 Guida utente

ADT

ADT DSC Impassa Manuale utente

ADT

ADT Fall Detection Pendant Manuale utente

ADT

ADT FOCUS CADET Manuale utente

ADT

ADT PremisePro none Manuale utente

ADT

ADT QuickConnect Manuale per l'uso e la cura

ADT

ADT L5000 Lynx Manuale per l'uso e la cura

ADT

ADT EZ Istruzioni per l'installazione e il funzionamento

ADT

ADT Safewatch QuickConnect Plus Istruzioni operative

ADT

ADT On-The-Go Emergency Response System Manuale utente

ADT

ADT Safewatch Pro 3000 Manuale utente

ADT

ADT ADT7AIO Series Istruzioni per il montaggio

ADT

ADT Security System 4112 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente