Adtec EN-30 Manuale utente
EN-30
Dual Channel Capable HD/SD MultiCODEC DSNG Encoder
w/ optional IF/LB/10Mhz Modulation
USER GUIDE
2.01.10
Table of Contents
Table of Contents
Trademarks & Copyrights
Electrical Device Compliance Notices
Safety Warnings and Cautions
Compliance Notices
FCC
Industry Canada
European Union EMC Directive Conformance Statement
Chapter 1 - Product Overview
Product Introduction
Chapter 2 - Getting Started
Front Panel
Panel Diagram
Model Indicator Decals
Front Panel LCD Quick Views
Transport LED Indicators - Channel 1 & 2
Audio Encode Indicators - Channel 1 & 2
System Indicators
Controls
Modulator Lineup
Front Panel Menu Structure
Services Menu
RF Tx Menu
IP Tx Menu
Video Menu
Audio Menu
PIDs Menu
VBI Menu
Profile Menu
CAS Menu
System Menu
Login
Duration
Backlight Dim Delay
Network Sub Menu
Time Sub Menu
NTP Sub Menu
Alarm
SNMP Sub Menu
Com2
Feature Sub Menu
Name
Firmware
Back Panel Diagram
Processor Connectors
Video/Audio Inputs
Output
Chapter 3 - Using the Web Application
Introduction
Logging In
Upgrading your device
Chapter 4 - How-To Guides
How to Complete a Manual Upgrade
How to Connect via Telnet
How to Connect via FTP
How to Use API Commands
How Video Rates are Configured
(Example is pertinent to MPEG2 (MP2))
How to enable EAS mode
EAS GPIO Connector Pinout
How to configure Network EAS Triggering
How passthru audio functions - Dolby E / 5.1 / 2.0, Dolby D, LPCM
Common Passthru Problems:
EN-30 Audio
Encoding:
How to use ASI Remux
EN-XX ASI Remux with Manual PID Mapping
Vertical Interval Time Code
Chapter 5 - Appendix
Appendix A - GNU General Public License
Appendix B - Technical Specifications
EN30-MP2-01 Video Specs (MPEG2):
EN30-MP4-01 Video Specs (AVC):
IF, L-Band Modulator + 10MHz (option) - IF/LB/10M-01
Appendix C - DB9-M Analog audio input pinout
Appendix D - Adtec Digital Support & Service
Telephone and Email Support
Preparing for Support
SLA Options
Trademarks & Copyrights
Copyright: (c) 2012-Present: Adtec Digital. All rights reserved. This document may not, in
whole or in part, be copied, photocopied, reproduced and translated, or reduced to any
electronic medium or machine-readable form without prior written consent from Adtec
Digital.
Trademarks: EN-30 is a trademark of Adtec Digital. Dolby, Dolby Digital, AC-3 and the
double-D symbol are registered trademarks of Dolby Laboratories. Other product and
company names may be trademarks or registered trademarks of their respective
companies. The information in this document is subject to change without notice.
Electrical Device Compliance Notices
Safety Warnings and Cautions
For your safety and the proper operation of the device:
●This unit must be installed and serviced by suitably qualified personnel only.
●Do not break the warranty seals on the device or open the lid. Only approved service
technicians are permitted to service this equipment.
●Disconnect all power before servicing the unit.
●Do not expose this device to rain or other moisture. Clean only with a dry cloth.
●If not installed in an equipment rack, install the product securely on a stable surface.
●Install the product in a protected location where no one can step or trip over the
supply cord, and where the supply cord will not be damaged.
●If a system is installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than the room ambient
temperature.
●Consideration should be given to installing the unit in an environment compatible
with the maximum recommended ambient temperature of 50 degrees Celsius (122
degrees Fahrenheit).
●Install the unit in a rack so that the amount of airflow required for safe operation is
not compromised.
○The recommended clearance on the top and sides of the unit is at least ½ “
(one half inch/one centimeter).
●Mounting of the unit in a rack should be such that no hazardous condition is achieved
due to uneven mechanical loading.
●Use only a grounded electrical outlet when connecting the unit to a power source.
●Reliable earth grounding of rack-mount equipment should be maintained.
○Particular attention should be given to supply connection other than direct
connections to the branch circuit (e.g., use of power strips).
Compliance Notices
FCC
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this device not expressly approved by Adtec Digital
could void the user’s authority to operate the equipment.
Industry Canada
This Class B digital apparatus meets all requirements of the Canadian Interference
Causing Equipment Regulations. Operation is subject to the following two conditions:(1) this
device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Cet appareillage numérique de la classe B répond à toutes les exigences de l'interférence
canadienne causant des règlements d'équipement. L'opération est sujette aux deux
conditions suivantes: (1) ce dispositif peut ne pas causer l'interférence nocive, et (2) ce
dispositif doit accepter n'importe quelle interférence reçue, y compris l'interférence qui peut
causer l'opération peu désirée.
European Union EMC Directive Conformance Statement
This product is in conformity with the protection requirements of EU Council Directive
2004/108/EC on the approximation of the laws of the Member States relating to
electromagnetic compatibility. Adtec Digital cannot accept responsibility for any failure to
satisfy the protection requirements resulting from a user modification of the product. This
product has been tested and found to comply with the limits for Class B Information
Technology Equipment according to CISPR 22 / EN 55022.
Chapter 1 - Product Overview
Product Introduction
The EN30 is a two-channel High and Standard definition MPEG-2 or H.264 encoder
supporting ATSC and DVB tables through ASI and IP transport streams. It can be ordered
with one or two video modules. The EN30 can be ordered with optional satellite modulation
for contribution and distribution applications.
It inherits Adtec’s broadcast quality compression, advanced feature set, service
performance, and reliability in the new dense two-channel platform targeted towards
broadcasters, cable and IP compression applications.
The device automatically detects video and audio from two sources (combination of
HD and SD acceptable), encodes, multiplexes and sends them back out as one combined TS
via IP, ASI or optional RF. VBI, CAS, and support for Emergency Alert (EAS) triggering are
standard.
Applications
Adtec Digital EN-30 and RD-30 contribution
Chapter 2 - Getting Started
Front Panel
The Function Buttons and Directional Keypad of the EN-30 are used to configure and
monitor the signal input and output of the device.
Panel Diagram
Model Indicator Decals
Front Panel LCD Quick Views
There are 9* Quick Views that can be accessed by the front panel LCD by pressing
the up and down arrows.
1) Encoding State: When in normal encoding mode, the LCD will display the following
information. Since there can be up to 2 encoders in the product, you can view the status of
both services. *When only one encoder module is present the second module statistics will
not be displayed*
2) Services State: This quick view displays the Service ID number, short name, and long
name for both encoder modules.
3) Video Input State: This quick view displays the resolution, input signal source, and
input signal mode for both encoder modules.
4) Video Encoding State: This quick view displays the Video Bit Rate, CODEC, and Chroma
type for both encoder modules.
5) Audio Encoding State: This quick view displays the type of Audio Encoding and the bit
rate for both encoder modules. Service 1 statistics are the first line of information. Service
2 statistics are the second line of information.
6) PID Statistics: This quick view displays the Video and Audio PIDs for both encoder
modules. Service 1 PIDs are the first line of information. Service 2 PIDs are the second line
of information.
7) TSoIP State: This quick view displays the status of IP Transport mode, RTP, FEC mode,
and number of selected services. Up to 4 destination IP addresses can be sent
simultaneously.
8) ASI Remux State: This quick view displays the status of ASI Remux status if the
feature is enabled.
9) *Modulator State: This quick view displays the status of RF Tx status if the unit is
equipped with optional modulator.
Transport LED Indicators - Channel 1 & 2
Indicator
Function
Video
On - Video is detected on the selected input.
Blink - No video is detected.
Encode
Off - Device is not encoding. Idle State
On - Device is encoding.
AVC
Off - MPEG 2 module installed.
On - MPEG 4 (H.264) module installed.
HD
Off - Encoding standard definition.
On - Encoding high definition.
Audio Encode Indicators - Channel 1 & 2
Indicator
Function
A1 -A4
Off - Audio encoder configuration is set to off.
On - Audio encoder configuration is set to encode or passthru.
Blink - Audio pair is enabled but there is no payload on the input
Indice
Altri manuali Adtec Convertitore multimediale
Adtec
Adtec EN-210 Manuale utente
Adtec
Adtec mediaHUB-HD 422 Manuale utente
Adtec
Adtec EN-81 Manuale utente
Adtec
Adtec EN-80 Manuale utente
Adtec
Adtec RD-70 Manuale utente
Adtec
Adtec RD-71 Manuale utente
Adtec
Adtec RD-71 Manuale utente
Adtec
Adtec EN-200 Manuale utente
Adtec
Adtec EN-20 Manuale utente
Adtec
Adtec mediaHUB Pro Manuale utente
Adtec
Adtec HDMI2qam Manuale utente
Adtec
Adtec Edje-2000 Manuale utente
Adtec
Adtec mediaHUB-HD Pro Manuale utente
Adtec
Adtec mediaHUB-HD 422 Manuale utente
Adtec
Adtec edje 5110 Manuale utente
Adtec
Adtec RD-60 Manuale utente
Adtec
Adtec EN-91 Manuale utente
Adtec
Adtec EN-31 Manuale utente
Adtec
Adtec Duet Manuale utente
Adtec
Adtec Edje 4000 Manuale utente
