ADTRAN NetVanta 8044M Manuale utente

NETVANTA SERIAL NETWORK INTERFACE MODULE (NIM) P/N 1200866L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SPECIFICATIONS

Serial

Interface

Provides V.35 or X.21 (V.11) electrical

interface

Connector: 26-Pin Smart Serial (DTE)

Operating

Mode

DTE Only

INSTALLATION INSTRUCTIONS

1. Remove the power from the unit.

2. Slide the Network Interface Module (NIM) into the option

slot until the NIM is firmly seated against the back of the

chassis.

3. Secure the pins at both edges of the NIM.

4. Connect the cables to the associated device(s).

5. Complete installation of the base unit.

6. Restore power to the unit.

An optional Dial Backup Interface Module (DIM) is

required for dial backup applications.

SERIAL DBU

SERIAL NETWORK CONNECTION PINOUT

Pin Name Pin Name

1TD_A 14 TD_B

2 ETC_A 15 ETC_B

3TCLK_A 16 TCLK_B

4RCLK_A17 RCLK_B

5 RD_A 18 RD_B

6 DCD_A 19 Unused

7 DTR_A 20 Unused

8 RTS_A 21 Unused

9 RTS_B (V.11 only) 22 Unused

10 CTS_B (V.11 only) 23 Unused

11 CTS_A 24 Unused

12 DSR_A 25 Unused

13 TM_A 26 Ground

DBU (RJ-48C) CONNECTION PINOUT

Pin Name Description

1-2 — Unused

3 R1 Network-Ring1

4 R Network-Ring

5 T Network-Tip

6 T1 Network-Tip1

7-8 — Unused

NETVANTA SERIAL NETWORK INTERFACE MODULE (NIM) P/N 1200866L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SERIAL NIM COMMANDS

description <text>

Comment line to provide an identifier for this interface (for example, circuit ID, contact

information, etc).

<text> Up to 80 alphanumeric characters

et-clock-source {rxclock | txclock* }

Configures the clock source used when creating the external transmit (reference

clock).

rxclock Uses the clock recovered from the receive signal to generate

external transmit clock.

txclock*Uses the clock recovered from the transmit signal to generate

external transmit clock.

ignore dcd

Defines the behavior of the serial interface when the data carrier detect (DCD) signal is

lost.

When configured to follow DCD (default condition), the serial interface will not attempt

to establish a connection when DCD is not present. When configured to ignore DCD,

the serial interface will continue to attempt to establish a connection even when DCD is

not present.

invert etclock

Configures the serial NIM to invert the external transmit (reference clock) in the data

stream before transmitting.

invert rxclock

Configures the serial interface to expect an inverted receive clock in the received data

stream.

invert txclock

Configures the serial interface to invert the transmit clock found in the transmitted data

stream.

serial mode {V35*| X21}

Configures the electrical mode for the interface. Both modes require the use of the

appropriate cable: V.35 (1200873L1) or X.21 (1200874L1).

shutdown

Turns off the interface. The no version of this command turns the interface on and allows

it to pass data.

snmp trap

Enables all supported Simple Network Management Protocol (SNMP) traps on the

interface.

snmp trap link-status

Controls the SNMP variable to enable (or disable) the interface to send SNMP traps

when there is an interface status change.

* Indicates default values.

Altri manuali per NetVanta 8044M

Indice

Altri manuali ADTRAN Hardware di rete

ADTRAN

ADTRAN Total Access 3050 Manuale utente

ADTRAN

ADTRAN E1 Manuale utente

ADTRAN

ADTRAN Octal IDSL DSLAM Octal IDSL Manuale utente

ADTRAN

ADTRAN NetVanta Series Manuale utente

ADTRAN

ADTRAN BR10 Manuale utente

ADTRAN

ADTRAN T400 Manuale di istruzioni

ADTRAN

ADTRAN Total Access 850 Manuale utente

ADTRAN

ADTRAN 1200312L5 Manuale utente

ADTRAN

ADTRAN ESU LT Manuale utente

ADTRAN

ADTRAN U-BR1TE Manuale utente

ADTRAN

ADTRAN Cable T1 ESF CSU ACE Manuale utente

ADTRAN

ADTRAN IQ Probe 1200214L1 Manuale utente

ADTRAN

ADTRAN TA 900 Manuale utente

ADTRAN

ADTRAN NetVanta 838 Manuale operativo

ADTRAN

ADTRAN Dual Nx56/64 Manuale utente

ADTRAN

ADTRAN FXS+ Dual Manuale utente

ADTRAN

ADTRAN Total Access DSLAM Octal SHDSL Manuale utente

ADTRAN

ADTRAN NetVanta 6360 Manuale utente

ADTRAN

ADTRAN NetVanta 818 Manuale utente

ADTRAN

ADTRAN NetVanta T1/FT1 + DSX-1 Manuale utente

ADTRAN

ADTRAN DS3 NIU3 Manuale utente

ADTRAN

ADTRAN ATLAS 550 Manuale utente

ADTRAN

ADTRAN Total Access 300 Manuale di istruzioni

ADTRAN

ADTRAN DSX 1 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente