ADTRAN NetVanta E1/FE1 + G.703 Network Interface... Manuale utente

NETVANTA E1 W/ G.703 DROP NETWORK INTERFACE MODULE (NIM) P/N 1200878L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SPECIFICATIONS

E1/FE1

Interface

Line Rate: 2.048 Mbps +/- 50 PPM

Line Code: AMI or HDB3

Framing: FAS with optional CRC-4

FE1 Line Rate: Timeslot, channelized

(in multiples of 64 kbps)

Receiver Sensitivity: -30 dB

Connector: RJ-48C

G.703

Interface

Line Interface: Per ITU-T G.703

Receiver Sensitivity:-30 dB

Line Rate: 2.048 Mbps, +/- 50 PPM

Capacity: 1 to 31 timeslots

If timeslot 16 signaling is used on the drop port, a

maximum of 15 timeslots can be mapped to router

(1-15 or 17-31).

Line Code: AMI or HDB3

Framing: FAS with Optional CRC-4

Connector: RJ-48C

Clock Source Network, internal, and through

Diagnostics Test pattern generation and detection

(QRSS, 511)

Network loopbacks

Alarm generation and detection

Network performance data (15 minutes and 24 hours)

WAN-E1 G.703 DBU

INSTALLATION INSTRUCTIONS

1. Remove power from the unit.

2. Slide the Network Interface Module (NIM) into the

option slot until the NIM is firmly seated against the

front of the chassis.

3. Secure the pins at both edges of the NIM.

4. Connect the cables to the associated device(s).

5. Complete the installation of the base unit.

6. Restore power to the unit.

WAN-E1 NETWORK (RJ-48C) CONNECTION PINOUT

Pin Name Description

1 R1 Receive data from the network

2 T1 Receive data from the network

3 — Unused

4 R Transmit data toward the network

5 T Transmit data toward the network

6-8 — Unused

G.703 (RJ-48C) CONNECTION PINOUT

Pin Name Description

1 R Transmit data toward the DTE

2 T Transmit data toward the DTE

3 — Unused

4 R1 Receive data from the DTE

5 T1 Receive data from the DTE

6-8 — Unused

NETVANTA E1 W/ G.703 DROP NETWORK INTERFACE MODULE (NIM) P/N 1200878L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

DBU (RJ-48C) CONNECTION PINOUT

Pin Name Description

1-2 — Unused

3 R1 Network-Ring1

4 R Network-Ring

5 T Network-Tip

6T1Network-Tip1

7-8 — Unused

An optional Dial Backup Interface Module (DIM) is

required for dial backup applications.

E1/FE1 + G.703 NIM COMMANDS

clock source {line* | internal | through}

Configures the source timing used for the interface.

line* Recovers clock from the E1 circuit.

internal Provides clocking using the internal oscillator.

through Recovers clock from the circuit connected

to the G.703 interface.

coding {ami | hdb3}

Configures the line coding for the E1 or G.703 physical interface. This setting must

match the line coding supplied on the circuit by the service provider.

ami Alternate mark inversion

hdb3* High-density bipolar 3

description <text>

Comment line to provide an identifier for this interface (for example, circuit ID, contact

information, etc.).

framing {crc4}

Configures the framing format of the E1 interface.

crc4 CRC4 framing enabled

loopback network {line | payload}

Initiates a loopback on the interface toward the network. Deactivate using the

no loopback network command.

line Initiates a metallic loopback of the physical E1 network

interface.

payload Initiates a loopback of the E1 framer (CSU portion) of the

E1 network interface.

shutdown

Turns off the interface. The no version of this command turns the interface on and

allows it to pass data.

snmp trap {line-status | link-status}

Enables the unit interface to send SNMP traps when there is an interface status change.

tdm-group <group#> timeslots <1-24> speed [56 | 64]

Creates a group of contiguous DS0s on this interface to be used during the

cross-connect process.

<group#> Number label to identify this TDM group

<DS0 range> DS0s in this group in the form: <starting DS0 - ending

DS0>

test pattern {ones | zeros}

Initiates sending the specified test pattern.

ones Generate continuous ones

zeros Generate continuous zeros

test-pattern clear

Clears the test pattern error count.

test-pattern insert

Inserts an error into currently active test pattern.

* Indicates default values.

Indice

Altri manuali ADTRAN Hardware di rete

ADTRAN

ADTRAN 1442890G2 Manuale utente

ADTRAN

ADTRAN NetVanta 900 Series Manuale

ADTRAN

ADTRAN Total Access 900 Series Manuale utente

ADTRAN

ADTRAN ACT 1900 Manuale utente

ADTRAN

ADTRAN DDM+ H2TU-C Manuale di istruzioni

ADTRAN

ADTRAN NETVANTA OCTAL POE Manuale utente

ADTRAN

ADTRAN 24-Port DSLAM Access Module IADSL Module Manuale utente

ADTRAN

ADTRAN FXO+ DUAL VOICE Manuale utente

ADTRAN

ADTRAN DS3 NIU3 Manuale utente

ADTRAN

ADTRAN 1442702PG1 Manuale utente

ADTRAN

ADTRAN Total Access 3000 Guida utente

ADTRAN

ADTRAN 1200 Series Manuale utente

ADTRAN

ADTRAN TSU ACE Manuale utente

ADTRAN

ADTRAN 1200089L2 HS Manuale utente

ADTRAN

ADTRAN IQ Probe 1200214L1 Manuale utente

ADTRAN

ADTRAN E1 Manuale utente

ADTRAN

ADTRAN SHDSL NxNTU Manuale di istruzioni

ADTRAN

ADTRAN NetVanta 6360 Manuale utente

ADTRAN

ADTRAN HDSL 3192 HTU-C Manuale di istruzioni

ADTRAN

ADTRAN T200 H2TU-R Manuale di istruzioni

ADTRAN

ADTRAN Cable T1 ESF CSU ACE Manuale utente

ADTRAN

ADTRAN NetVanta 2000 Series Manuale utente

ADTRAN

ADTRAN IQ 310 Manuale utente

ADTRAN

ADTRAN BVL3ADJD Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente