ADTRAN TSU LT Manuale utente

TSU LT P/N 1202060L2/1202060L4

For more detailed documentation, visit us online at www.adtran.com

NETWORK CONNECTION PINOUT

Pin Name Description

1 R1 RXDATA Receive data from the Network - Ring

2 T1 RXDATA Receive data from the Network - Tip

3, 6, 7, 8 UNUSED n/a

4 R TXDATA Transmit data towards the Network - Ring

5 T TXDATA Transmit data towards the Network - Tip

INSTALLATION INFORMATION

• An eight-position modular jack (labeled NETWORK) is provided to

connect to the network T1 circuit. The pinout is provided on this Quick

Start Guide. See Chapter 2, Installation, of the TSU LT User Manual for

more information.

• The rear panel contains a single V.35 (V.11 for P/N 1202060L4)

interface for connecting to DTE equipment. The pinouts for these

interfaces are provided on this Quick Start Guide.

• When shipped from the factory, the TSU LT is uninitialized and set to

factory default conditions. At the first application of power, the unit will

automatically execute self-tests followed by an initialization sequence.

• The TSU LT can be configured and controlled using the local front panel

of the unit, by a direct or remote serial connection via the control port, or

by ADTRAN’s PC-based management software package,

T-WATCH PRO. A limited menu tree is provided on the back of this

sheet. For more detailed menu information, refer to the TSU LT User

Manual.

• Additional information can be found on the product CD which contains

the TSU LT User Manual, FAQs, Data Sheets, Applications, and White

Papers.

REAR PANEL DESCRIPTIONS

Network Connector Connection to T1 circuit

Test Interface

(P/N 1202060L2 only)

Bantam jacks provided for monitoring

and testing of a T1 circuit

Control Chain-In/Chain-Out Connection to a VT100 terminal

V.35 Connector (P/N 1202060L2)

V.11 Connector (P/N 1202060L4)

High-speed DTE interface

Power Switch Turns power to the TSU on or off

220 VAC Connection Power cord connection for a reliably

grounded 220 VAC, 60 Hz power source

TSU LT P/N 1202060L2/1202060L4

MENU TREE - OVERVIEW

1) NI PERF RPRTS

1) STATUS 2) CURR ERR/ALM

3) ERR/ALM HIST

1) NETWORK (NI)

2) CONFIG 2) UNIT

MAIN MENU 3) PORT

1) TIME/DATE

2) SOFTWARE REV

3) UTIL 3) REINIT UNIT

4) ADDRESS

5) SET PASSCODE

6) FACT RESTORE

1) NETWORK TESTS

4) TEST 2) RUN SELF–TEST

3) PORT TESTS

V.35 CONNECTOR PINOUT

Pin CCITT Description

A 101 Protective ground (PG)

B 102 Signal ground (SG)

C 105 Request to send (RTS) from DTE

D 106 Clear to send (CTS) to DTE

E 107 Data set ready (DSR) to DTE

F 109 Received line signal detector (DCD)

to DTE

H — Data terminal ready (DTR) from

DTE

J — Ring indicator (RI)

L — Local loopback (LL)

N — Remote loopback (RL)

R 104 Received data (RD-A) to DTE

T 104 Received data (RD-B) to DTE

V 115 RX clock (RC-A) to DTE

X 115 RX clock (RC-B) to DTE

P 103 Transmitted data (TD-A) from DTE

S 103 Transmitted data (TD-B) from DTE

Y 114 TX clock (TC-A)

AA 114 TX clock (TC-B)

U 113 External TX clock (ETC-A) from

DTE

W 113 External TX clock (ETC-B) from

DTE

NN&K — Test mode (TM) to DTE

V.11 CONNECTOR PINOUT

Pin A Pin B Description

Shield

(SI) Signalling Rate Indicator

(SD) Send Data

(ST) Send Timing

(RD) Receive Data

(RS) Request to Send

(RT) Receive Timing

(CS) Clear to Send

11 29

(LL) Local loopback

(DM) Data Mode

12* 30* (TR) Terminal Ready

13 31 (RR) Receiver Ready

15*

(RL) Remote Loopback

(IC) Incoming Call

16*

17 35

(SR) Signaling Rate Selector

(TT) Terminal Timing

(TM) Test Mode

(SG) Signal Ground

20*

28*

(RC) Receive Common

(IS) Terminal in Service

32*

33*

(SS) Select Standby

(SQ) Signal Quality

34*

36*

37*

(NS) New Signal

(SB) Standby Indicator

(SC) Send Common

Note: Pins 3 and 21 are undefined.

* Indicates pins not being used

Compliance

Double pole/neutral fusing.

The socket-outlet shall be

installed near the equipment

and shall be easily accessible.

Altri manuali per TSU LT

Questo manuale è adatto per i seguenti modelli

Altri manuali ADTRAN Hardware di rete

ADTRAN

ADTRAN Fractional T1 Tandem Channel Unit FT1-TDM Manuale utente

ADTRAN

ADTRAN Total Access 300 Series Manuale utente

ADTRAN

ADTRAN NetVanta 7000 Series Manuale utente

ADTRAN

ADTRAN TSU ACE Manuale utente

ADTRAN

ADTRAN TRACER 4205 Manuale utente

ADTRAN

ADTRAN XFP Manuale utente

ADTRAN

ADTRAN DDM+ H2TU-C Manuale di istruzioni

ADTRAN

ADTRAN U-BR1TE Manuale utente

ADTRAN

ADTRAN T3SU 300 Manuale utente

ADTRAN

ADTRAN NetVanta 8044M Manuale utente

ADTRAN

ADTRAN 1202295L1 Manuale utente

ADTRAN

ADTRAN 1200630L1 Manuale utente

ADTRAN

ADTRAN OSU 300 Manuale utente

ADTRAN

ADTRAN GPON TA352 Manuale utente

ADTRAN

ADTRAN 602 Manuale utente

ADTRAN

ADTRAN SFP+ Manuale utente

ADTRAN

ADTRAN Express 6500 Series Manuale di istruzioni

ADTRAN

ADTRAN BR10 Manuale utente

ADTRAN

ADTRAN Total Access 900 Series Manuale utente

ADTRAN

ADTRAN BVL3ADJD Manuale utente

ADTRAN

ADTRAN OC-12 Manuale utente

ADTRAN

ADTRAN SHDSL NxNTU Manuale di istruzioni

ADTRAN

ADTRAN DS3 NIU3 Manuale di istruzioni

ADTRAN

ADTRAN Total Access 301 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente