ADTRAN NetVanta 340 Series Manuale

NetVanta 340 Series Hardware Installation Guide

1200422L1 NetVanta 340 Unit

61200422L1-34A

November 2004

Trademarks NetVanta 340 Series Hardware Installation Guide

Trademarks

Any brand names and product names included in this manual are trademarks, registered trademarks, or

trade names of their respective holders.

To the Holder of the Manual

The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change

the contents without prior notice.

In no event will ADTRAN be liable for any special, incidental, or consequential damages or for

commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

Phone: (256) 963-8000

Printed in U.S.A.

NetVanta 340 Series Hardware Installation Guide Conventions

Conventions

Notes provide additional useful information.

Cautions signify information that could prevent service interruption.

Warnings provide information that could prevent damage to the equipment or

endangerment to human life.

Safety Instructions NetVanta 340 Series Hardware Installation Guide

Safety Instructions

When using your telephone equipment, please follow these basic safety precautions to reduce the risk of

fire, electrical shock, or personal injury:

1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a

wet basement, or near a swimming pool.

2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote

risk of shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord, power supply, and/or batteries indicated in the manual. Do not dispose of

batteries in a fire. They may explode. Check with local codes for special disposal instructions.

5. The socket-outlet shall be installed near the equipment and shall be easily accessible.

Save These Important Safety Instructions

This equipment incorporates double pole/neutral fusing. If the neutral fuse opens and the

line fuse does not open, voltage could still be present in the unit.

Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

NetVanta 340 Series Hardware Installation Guide FCC-Required Information

FCC-Required Information

FCC regulations require that the following information be provided in this manual:

1. This equipment complies with Part 68 of FCC rules and requirements adopted by ACTA. Each

registered interface has a label that contains, among other information, a product identifier in the

format US:AAAEQ##TXXXX. If requested, provide this information to the telephone company.

2. If this equipment causes harm to the telephone network, the telephone company may temporarily

discontinue service. If possible, advance notification is given; otherwise, notification is given as

soon as possible. The telephone company will advise the customer of the right to file a complaint

with the FCC.

3. The telephone company may make changes in its facilities, equipment, operations, or procedures

that could effect the proper operation of this equipment. Advance notification and the opportunity

to maintain uninterrupted service are given.

4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty

information. The telephone company may require this equipment to be disconnected from the

network until the problem is corrected or it is certain the equipment is not malfunctioning.

5. This unit contains no user-serviceable parts.

6. This equipment is designed to connect to the telephone network or premises wiring using an FCC-

compatible modular jack, which is compliant with Part 68 and requirements adopted by ACTA.

7. The following information may be required when applying to the local telephone company for

leased line facilities:

8. The REN is useful in determining the quantity of devices you may connect to your telephone line

and still have all of those devices ring when your number is called. In most areas, the sum of the

RENs of all devices should not exceed five. To be certain of the number of devices you may

connect to your line as determined by the REN, call your telephone company to determine the

maximum REN for your calling area.

9. This equipment may not be used on coin service provided by the telephone company. Connection

to party lines is subject to state tariffs. Contact your state public utility commission or corporation

commission for information.

Part Number Registration

Number Service Type REN/SOC FIC USOC

1200422L1 US: HDCDL01A1200422L1 ADSL 0.1A/9.0F 02LS2 RJ-11C

FCC Radio Frequency Interference Statement NetVanta 340 Series Hardware Installation Guide

FCC Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

NetVanta 340 Series Hardware Installation Guide Industry Canada Compliance Information

Industry Canada Compliance Information

The Industry Canada label applied to the product (identified by the Industry Canada logo or the “IC:” in

front of the certification/registration number) signifies that the Industry Canada technical specifications

were met.

The Ringer Equivalence Number (REN) for this terminal equipment is supplied in the documentation or on

the product labeling/markings. The REN assigned to each terminal device indicates the maximum number

of terminals that can be connected to a telephone interface. The termination on an interface may consist of

any combination of devices subject only to the requirement that the sum of the RENs of all the devices

should not exceed five (5).

Canadian Emissions Requirements

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus

as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the

Department of Communications.

Cet appareil numérique respecte les limites de bruits radioelectriques applicables aux appareils numériques

de Class A prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques,” NMB-003 edictee

par le ministre des Communications.

Warranty and Customer Service NetVanta 340 Series Hardware Installation Guide

Warranty and Customer Service

ADTRAN will repair and return this product within the warranty period if it does not meet its published

specifications or fails while in service. Warranty information can be found at: http://support.adtran.com

(Click on Warranty and Repair Information, under Support.).

Product Registration

Registering your product helps ensure complete customer satisfaction. Please take time to register your

products on line at http://support.adtran.com. Click on Service/Support and then on Product Registration

under Support.

Product Support Information

A return material authorization (RMA) is required prior to returning equipment to ADTRAN. For service,

RMA requests, training, or more information, use the following contact information:

Repair and Return

If you determine that a repair is needed, please contact our Customer and Product Service (CaPS)

department to have an RMA number issued. CaPS should also be contacted to obtain information

regarding equipment currently in house or possible fees associated with repair.

Identify the RMA number clearly on the package (below address), and return to the following address:

CaPS Department (256) 963-8722

ADTRAN Customer and Product Service

901 Explorer Blvd. (East Tower)

Huntsville, Alabama 35806

RMA # _____________

NetVanta 340 Series Hardware Installation Guide Product Support Information

Pre-Sales Inquiries and Applications Support

Your reseller should serve as the first point of contact for support. If additional pre-sales support is needed,

the ADTRAN Support web site provides a variety of support services such as a searchable knowledge

base, latest product documentation, application briefs, case studies, and a link to submit a question to an

Applications Engineer. All of this, and more, is available at:

When needed, further pre-sales assistance is available by calling our Applications Engineering

Department.

Post-Sale Support

Your reseller should serve as the first point of contact for support. If additional support is needed, the

ADTRAN Support web site provides a variety of support services such as a searchable knowledge base,

updated firmware releases, latest product documentation, service request ticket generation and trouble-

shooting tools. All of this, and more, is available at:

When needed, further post-sales assistance is available by calling our Technical Support Center. Please

have your unit serial number available when you call.

Installation and Maintenance Support

The ADTRAN Custom Extended Services (ACES) program offers multiple types and levels of installation

and maintenance services which allow you to choose the kind of assistance you need. This support is

available at:

For questions, call the ACES Help Desk.

http://support.adtran.com

Applications Engineering (800) 615-1176

http://support.adtran.com

Technical Support (888) 4ADTRAN

International Technical Support 1-256-963-8716

http://support.adtran.com

ACES Help Desk (888) 874-ACES (2237)

Product Support Information NetVanta 340 Series Hardware Installation Guide

Training

The Enterprise Network (EN) Technical Training Department offers training on our most popular products.

These courses include overviews on product features and functions while covering applications of

ADTRAN's product lines. ADTRAN provides a variety of training options, including customized training

and courses taught at our facilities or at your site. For more information about training, please contact your

Territory Manager or the Enterprise Training Coordinator.

Training Phone (800) 615-1176, ext. 7500

Training Fax (256) 963-6700

Training Email training@adtran.com

Indice

Altri manuali ADTRAN Router di rete

ADTRAN

ADTRAN NetVanta 1535P Manuale

ADTRAN

ADTRAN Express L128FP Manuale utente

ADTRAN

ADTRAN NetVanta 1335 Series Manuale utente

ADTRAN

ADTRAN ATLAS 550 Guida utente

ADTRAN

ADTRAN SMART/RG SR555ac Manuale utente

ADTRAN

ADTRAN NetVanta 4305 Manuale

ADTRAN

ADTRAN NetVanta 1335 Series Manuale utente

ADTRAN

ADTRAN NetVanta 2000 Series Manuale utente

ADTRAN

ADTRAN NetVanta 3120 with DBU Manuale

ADTRAN

ADTRAN NetVanta 3430 Manuale utente

ADTRAN

ADTRAN Express L768 Manuale utente

ADTRAN

ADTRAN 1202870L1 Manuale utente

ADTRAN

ADTRAN NetVanta 4305 Manuale utente

ADTRAN

ADTRAN NetVanta 4430 Manuale utente

ADTRAN

ADTRAN 1700601G2 Manuale utente

ADTRAN

ADTRAN NetVanta 3458-PoE Manuale utente

ADTRAN

ADTRAN NetVanta 3448 Manuale utente

ADTRAN

ADTRAN Express L128T S Manuale utente

ADTRAN

ADTRAN Vanta 1335 Manuale

ADTRAN

ADTRAN NetVanta 340 Manuale utente

ADTRAN

ADTRAN NetVanta 3200 series Manuale utente

ADTRAN

ADTRAN TRACER 5045 Manuale utente

ADTRAN

ADTRAN NetVanta 3200 series Manuale utente

ADTRAN

ADTRAN NetVanta 3305 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza