Advanced Wireless Communications Mini 3 Manuale utente

Turn On Cloning

Begin with the radio in the

o󰀨 position. Hold down the

monitor button while turning

the radio on.

Master Unit

You will rst need to

determine which of your

radios is going to be your

master unit. This will be the

one radio to which all of your

other radios will match up to.

If Done Correctly

A “C” should light up on the

screen.

Repeat

Repeat this on any other

radio you wish to clone.

Begin Cloning

Press and release the Push-

To-Talk button on the master

unit to begin the cloning

process.

While Cloning

The master unit’s LED will

light steady red. The other

radios’ LED will ash red.

Wireless cloning allows you to easily copy radio settings from one radio (the master)

to all other radios within range without the use of wires or cables.

500463

(800) 475-5852

20809 Kensington Blvd, Lakeville, MN 55044

www.advancedwireless.com

Quick Start Guide

MINI 3 Wireless Cloning

Please Note

Any Radio Can Become the Master

When the push-to-talk button is pressed on any radio it will become the master radio even if it is not the one you

want to use. Be careful when cloning that only the master radio’s push-to-talk button is pressed.

To Resume Normal Usage

Press and hold the “on/o󰀨”

button until it returns to the

channel mode screen.

Cloning is Complete

When all LED lights are

done showing red (steady or

ashing.)

If Done Correctly

The screen should display the

current channel mode.

When Complete, test to make sure

the radios have the number of

channels they should and that they

communicate with each other. If not,

repeat the process.

500463

(800) 475-5852

20809 Kensington Blvd, Lakeville, MN 55044

www.advancedwireless.com

Quick Start Guide

Mini 3 Wireless Cloning Continued

Altri manuali per Mini 3

Altri manuali Advanced Wireless Communications Ricetrasmettitore