Advaning CLASSIC Series Manuale utente
CLASSIC SERIES
(Certified Reconditioned) Retractable Awning
For safety reasons, please read the instructions and warnings
in this manual carefully before installing the awning.
Owner’s Manual
1
In order to avoid
accidental injury or
product damage,
DO NOT remove
the safety restraints
from the awning’s
lateral arms until
instructed to do so.
Safety instructions and warnings........................................... 2
Package contents and parts .............................................. 3
Tool requirements ...................................................... 4
Product features ....................................................... 4
Installation
Bracket placement reference chart ................................... 5
Determine where to install your awning ............................... 6
Install wall brackets
Standard stud installation ....................................... 7
Masonry installation ............................................ 8
Install ceiling brackets ............................................ 11
Install awning onto brackets ....................................... 12
Ready your awning............................................... 13
Install power cord for electric models ................................ 13
Using remote control ............................................. 13
Operation
Manual model................................................... 14
Electric model .................................................. 14
Adjust awning pitch ............................................. 15
Fabric Rolling Direction ........................................... 15
Maintenance.......................................................... 16
Warranty............................................................. 17
TABLE OF CONTENTS
www.advaning.com Toll Free (US): (855) 574-0158
SAFETY INSTRUCTIONS
Fig.1
2
DO NOT keep the awning
open during:
A: RAIN
B: SNOW
C: STRONG WIND
D: AWAY FROM HOUSE
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY
• Pay close attention during installation to ensure that the Advaning awning is installed properly.
• Perform the installation in dry and optimal conditions. Always wear protective gear and gloves when han-
dling sharp metal parts. If you do not feel that you can properly install the awning, please seek professional
help.
• The Advaning awning should only be operated by an adult that understands all the functions and opera-
tions of the awning. Please keep unsupervised children away from playing with the awning or its parts.
• The product should be used only as described in this Advaning Owner’s manual. Do not carry out any main-
tenance other than what is shown in this manual. For any issues that are not covered in this manual, please
seek support from Advaning Customer Service.
• Only use Advaning recommended accessories and original replacement parts.
• Do not disassemble the awning motor, it is recommended that you seek professional help for any mainte-
nance involving the motor.
• Do not handle any part of the power plug or motor with wet hands or objects, doing so could induce an
electric shock.
• Do not use the electric option if the cord or plug is damaged. Damaged power cords and plugs must be
replaced by Advaning or qualied professional installer.
• Ensure that the power cord is not strained and that it has ample slack to avoid damage. Avoid pulling the
cord around sharp edges or corners. Keep the power cord away from high trafc areas.
• Do not pull or tug on the cord. Grasp the plug by the base when unplugging the device to avoid damage
and rewind the cord and store to prevent a tripping hazard.
• Do not place any heat source or open ame under or near the awning.
• Do not place, hang, or stand objects or persons on the awning itself, doing so can damage the awning or
cause severe personal injury and in extreme cases death.
SAFETY INSTRUCTIONS AND WARNINGS
Fig.2
A B C D
Toll Free (US): (855) 574-0158 www.advaning.com
3
Awning Size (Width) 8’~10’ 12’~16’ 18’
Parts name Quantity
Wall/ceiling
dual bracket
set
Wall/ceiling
bracket 2 3 4
Retaining hex
bolt 2 3 4
Retaining nut 2 3 4
3/8” washer 2 3 4
3/8” x 4” Lag screw 4 6 8
3/8” Flat washer 4 6 8
Expansion
bolt set
Expansion bolt 4 6 8
Washer 4 6 8
Hex bolt 4 6 8
www.advaning.com Toll Free (US): (855) 574-0158
PACKAGE CONTENTS AND PARTS
Awning unit Qty: 1
Hand crank Qty: 1 (63 Inches Length)
Remote Control Kit*
Qty: 1
Motor Regulator*Qty: 1
Before installation, make
certain that the package
contains all parts as listed
on this page.
Fig.3
*Motorized models (with 16ft
power cord) only.
If motor adjustment is needed,
please contact Advaning
Service Team for instructions.
Failure to obtain proper
instructions may result in
unrepairable damage to motor
and will void the Manufacturers
Warranty.
4
TOOL REQUIREMENTS
PRODUCT FEATURES
Fig.5
Fig.4
Arm shoulder
Cassette
Crank loop
Torsion bar
Roller tube
Awning fabric
Front bar
Valance
Powercord
Retractable arms
Easy PitchTM loop
Wall/ceiling bracket
Lag screw
Retaining bolt
Toll Free (US): (855) 574-0158 www.advaning.com
Electric model only
SUGGESTED TOOLS
Marker / pencil
Measuring tape
Electronic Stud nder
Chalk line / laser level
Level
3/8” socket wrench
Drill bit
Masonry drill bit
Drill with bits
Ladders (2)
Minimum 2 people to
install
1
5
6
3
7
2
4
8
9
10
1
1
9
3
6
7
6
2
2
4
4
5
5
7
8
89
12
10
13
14
3
10
11
12
13
14
11
11
1
5
6
3
7
2
4
8
9
10
5
INSTALLATION
www.advaning.com Toll Free (US): (855) 574-0158
Fig.6
Left awning shoulder
Right awning shoulder
BRACKET
PLACEMENT
REFERENCE
CHART
Please use the charts
for bracket location
reference.
ALL brackets must be mounted
onto wall studs or other major
structural supports.
NOTE: The left most bracket
must be placed on the outer
left side of awning shoulder.
The right-side brackets must
be placed on the outer-right
side of the right awning
shoulder.
A
B
A
A
A
B
B
B
8 ~ 10 feet awning
12-16 feet awning
18 feet awning
6
INSTALLATION
Fig 7
Fig 8
Toll Free (US): (855) 574-0158 www.advaning.com
Side view
Locate a position that is
Recommended
8~10 feet above the
ground/oor/deck.
Minimum 1 inch clear-
ance below the roof/
eave/overhang.
With at least 12 ver-
tical inch of clear
space.
Minimum 8 feet
width.
The surface should be
free and clear of any
obstructions along the
entirety of the awning.
*Personal height requirements may require an
alternate install height to 10 feet.
DETERMINE
WHERE TO
INSTALL YOUR
AWNING
Roof, eave or overhang
Roof, eave or overhang
Recommended
8~10 feet
11 feet projection
Minimum 1 inch
Ground, oor or deck
Ground, oor or deck
Minimum 12 inch
clear space
A
Recommended
8~10 feet*
D
Minimum
8 feet
CMinimum 12 inch clear space
BMinimum 1 inch
A
B
C
D
7www.advaning.com Toll Free (US): (855) 574-0158
INSTALLATION
Fig 9
Fig 10
Fig 11 Fig 12
Standard stud
installation
INSTALLING WALL
BRACKETS
Measure and mark
where the top of your
awning bracket will
be placed.
Use a regular level
and chalk line or a
laser level, mark a
straight level line.
Locate and mark the
center of the wall
studs along this line
using a stud nder.
*Please follow the
directions of your stud
nder as instructed
by the manufacturer.
Align the top of the
bracket to the chalk
line.
Align the center of
the bracket mounting
holes with the center
of the stud.
Use a level to make
sure the bracket is
straight and mark
the center of the
mounting holes.
Drill mounting holes
using a drill bit.
CAUTION: Install the
bracket onto wall studs
based on the recom-
mended bracket location
(see page 5).
Bracket
Center of stud
Wall
3.5”
1Minimum 1 inch
Level Chalkliner
Stud nder
Level
1
Recommended
8~10 feet
2
3
4
5
6
7
Marker/pencil
1
2
3
4
5
6
7
8
INSTALLATION
Fig 13 Fig 14
Fig 15
Fig 16
Toll Free (US): (855) 574-0158 www.advaning.com
Place brackets over
the appropriate
holes and use a level
to make sure the
bracket is leveled and
square to the line.
Use a washer and
lag screw to secure
all the brackets until
snugged against the
surface.
NOTE: For proper
installation of brackets on
uneven surfaces or siding,
use shims or spacers to
level the bracket.
Shims and spacers can
also be used for vinyl
or aluminum siding to
provide a more solid
surface for mounting.
Masonry installation
For installing Advaning
awning onto brick or solid
concrete wall/surface.
CAUTION: Always install
brackets securely to the
brick or concrete and
not in the grout to avoid
collapse and personal
injury.
Bracket Bracket
washer
Washer
Lag screw
Lag screw
Shim/spacer
Siding
Wall
Wall
Level
8
9
8
9
9
INSTALLATION
www.advaning.com Toll Free (US): (855) 574-0158
Fig 20
Fig 18 Fig 19
Fig 17
Follow instructions for
standard installation
step 1 and 2 (page 7).
Usetherecommended
bracket location
chart (page 5) to nd
bracket location for
your awning model
along the line.
Align the top of the
bracket to the chalk
line and use a level to
make sure the bracket
is straight.
Mark the center of
the bracket mounting
holes.
Drill mounting holes
using a masonry drill
bit.
Wall
3.5”
Bracket Center
Bracket locations base
on your awning model
Marker/pencil
2
3 4
5
3
4
5
1
2
Altri manuali per CLASSIC Series
1
Indice
Altri manuali Advaning Accessori
Advaning
Advaning SG Series Manuale utente
Advaning
Advaning SG Series Manuale utente
Advaning
Advaning S series Manuale utente
Advaning
Advaning PN Series Manuale utente
Advaning
Advaning FS SERIES Manuale utente
Advaning
Advaning PA SERIES Manuale utente
Advaning
Advaning GA Series Manuale utente
Advaning
Advaning PA SERIES Manuale utente
Advaning
Advaning LUXURY Series Manuale utente
Advaning
Advaning CLASSIC Series Manuale utente
