Advantech ADAM CPU 821 Series Manuale utente

CPU ADAM 821x Chapter 1 Principles

ADAM 8000 Manual CPU 821x – Rev 1.1 1-1

Chapter 1 Principles

This introduction contains references on the handling and information about

application areas and usage of the CPU modules.

It also provides certain suggestions on the approach when programming

the module and the CPU specifications that are important in this respect.

Below follows a description of:

• Safety information for users

• Construction and operation of the CPU 821x

• Programming principles

Topic Page

Chapter 1 Principles ............................................................................... 1-1

Safety information for users................................................................... 1-2

Hints for the deployment of the MPI interface........................................ 1-3

Hints for the deployment of the Green Cable ........................................ 1-4

Overview System 82xx .......................................................................... 1-5

General description of the System 82xx................................................ 1-6

Overview CPU 821x .............................................................................. 1-7

Hints for project engineering.................................................................. 1-8

Application fields.................................................................................. 1-11

Features .............................................................................................. 1-12

Operating modes of a CPU.................................................................. 1-13

CPU 821x programs ............................................................................ 1-14

CPU 821x operands ............................................................................ 1-14

Outline

Contents

Chapter 1 Principles CPU ADAM 821x

1-2 ADAM 8000 Manual CPU 821x – Rev 1.1

Safety information for users

ADAM modules make use of highly integrated components in MOS-

technology. These components are extremely sensitive to over-voltages

that may occur during electrostatic discharges.

The following symbol is attached to modules that can be destroyed by

electrostatic discharges:

The symbol is located on the module, the module rack or on packing

material and it indicates the presence of electrostatically sensitive

equipment.

It is possible that electrostatically sensitive equipment is destroyed by

energies and voltages that are far less than the human threshold of

perception. These voltages may occur where persons do not discharge

themselves before handling electrostatically sensitive modules and they

may damage components thereby causing the module to become

inoperable or unusable. Modules that have been damaged by electrostatic

discharge are usually not detected immediately. The respective failure may

become apparent after a period of operation.

Components damaged by electrostatic discharges can fail after a

temperature change, mechanical shock or changes in the electrical load.

Only the consistent implementation of protective devices and meticulous

attention to the applicable rules and regulations for handling the respective

equipment is able to prevent failures of electrostatically sensitive modules.

Please ship the modules exclusively in the original packing material.

When you are conducting measurements on electrostatically sensitive

modules you should take the following precautions:

• Floating instruments must be discharged before use.

• Instruments must be grounded.

You should only use soldering irons with grounded tips when you are

making modifications on electrostatically sensitive modules.

Attention!

Personnel and instruments should be grounded when working on

electrostatically sensitive modules.

Handling of

electrostatically

sensitive modules

Shipping of

modules

Measurements

and alterations on

electrostatically

sensitive modules

CPU ADAM 821x Chapter 1 Principles

ADAM 8000 Manual CPU 821x – Rev 1.1 1-3

Hints for the deployment of the MPI interface

The MP2I jack combines 2 interfaces in 1:

• MP interface

• RS232 interface

Please regard that the RS232 functionality is only available by using the

Green Cable from Advantech.

The MP interface provides the data transfer between CPUs and PCs. In a

bus communication you may transfer programs and data between the

CPUs interconnected via MPI.

Connecting a common MPI cable, the MPI jack supports the full MPI

functionality.

Important notes for the deployment of MPI cables!

Deploying MPI cables at the ADAM CPUs from Advantech, you have to

make sure that Pin 1 is not connected. This may cause transfer problems

and in some cases damage the CPU!

Especially Profibus cables from Siemens, like e.g. the 6XV1 830-1CH30,

must not be deployed at MP2I jack.

For damages caused by nonobservance of these notes and at improper

deployment, ADAM does not take liability!

For the serial data transfer from your PC, you normally need a MPI

transducer. Fortunately you may also use the "Green Cable" from

Advantech You can order this under the order no. ADAM-8950-0KB00.

The "Green Cable" supports a serial point-to-point connection for data

transfer via the MP2I jack exclusively for ADAM 8xxx CPUs.

Please regard the hints for the deployment of the "Green Cable" on the

following page.

What is MP2I?

Deployment as

MP interface

Deployment as

RS232 interface only

via "Green Cable"

Chapter 1 Principles CPU ADAM 821x

1-4 ADAM 8000 Manual CPU 821x – Rev 1.1

Hints for the deployment of the Green Cable

The Green Cable is a green connection cable, manufactured exclusively for

the deployment at ADAM System components.

The Green Cable is a programming and download cable for ADM CPUs

8xxx and ADAM fieldbus masters. The Green Cable from Advantech is

available under the order no. ADAM-8950-0KB00.

The Green Cable allows you to:

• transfer projects serial

Avoiding high hardware needs (MPI transducer, etc.) you may realize a

serial point-to-point connection via the Green Cable and the MP2I jack.

This allows you to connect components to your ADAM CPU that are able

to communicate serial via an MPI adapter like e.g. a visualization

system.

• execute firmware updates of the CPUs and fieldbus masters

Via the Green Cable and an upload application you may update the

firmware of all recent CPUs 8xxx and certain fieldbus masters (see

Note).

Important notes for the deployment of the Green Cable

Nonobservance of the following notes may cause damages on system

components.

For damages caused by nonobservance of the following notes and at

improper deployment, Advantech does not take liability!

Note to the application area

The Green Cable may exclusively deployed directly at the concerning jacks

of the ADAM components (in between plugs are not permitted).

At this time, the following components support the Green Cable:

CPUs 8xxx and the fieldbus masters ADAM 8208-1xx01 from Advantech.

Note to the lengthening

The lengthening of the Green Cable with another Green Cable res. The

combination with further MPI cables is not permitted and causes damages

of the connected components!

The Green Cable may only be lengthened with a 1:1 cable (all 9 Pins are

connected 1:1).

What is the

Green Cable?

CPU ADAM 821x Chapter 1 Principles

ADAM 8000 Manual CPU 821x – Rev 1.1 1-5

Overview System 82xx

The System 82xx is a modular automation system for low and middle range

of performance that you may use either centralized or decentralized. The

single modules are directly clipped to a 35mm DIN rail and are connected

together with the help of special bus clips.

The following picture shows the range of performance of the System82xx:

System 8000

decentral

peripheral

Profibus DeviceNet CAN Interbus PC-CPU PLC-CPU

Dig. IN / Dig. OUT / Anal. IN / Anal. OUT / FM / CP

DP 8xxx PC 8xxx PLC 8xxx

for STEP®7 of Siemens

central

on demand

The current manual describes the PLC-CPU family CPU 821x compatible to

STEP7 by Siemens.

The peripheral modules, PCs and decentralized peripheral equipment are

to find in the manual HB97 "System82xx". This manual also contains hints

for installation and commissioning of the System82xx.

The System 82xx

Overview

Manuals

Chapter 1 Principles CPU ADAM 821x

1-6 ADAM 8000 Manual CPU 821x – Rev 1.1

General description of the System 82xx

• Norm profile head rail 35mm

• Peripheral modules with labeling strip

• Measurements basic module:

Single width: (HxWxD) in mm: 76x25.4x76; in inches: 3x1x3

Double width: (HxWxD) in mm: 76x50.8x76; in inches: 3x2x3

Please note, that you have to plug in the CPU only at plug-in location 1

resp. 1 and 2 (if double width).

NET

VIPA 288-2BL10

PC 288

OFF

IM 253 CAN

ADR.

VIPA 253-1CA00

DC24V

DI 8xDC24V

SM 8221

ADAM-8221-1BF00

DI 8xDC24V

SM 8221

ADAM-8221-1BF00

DI 8xDC24V

SM 8221

ADAM-8221-1BF00

DI 8xDC24V

SM 8221

ADAM-8221-1BF00

DI 8xDC24V

SM 8221

ADAM-8221-1BF00

DI 8xDC24V

SM 8221

ADAM-8221-1BF00

DI 8xDC24V

SM 8221

ADAM-8221-1BF00

DI 8xDC24V

SM 8221

ADAM-8221-1BF00

CPU 8216

24V +

MMC

ADAM-8216-2BA01

CPU 8216 DP

24V +

MMC

ADAM-8216-2BP01

DE D

• Plug in via CageClamps at the front-facing connector, core cross-section

0.08...2.5mm2resp. 1.5 mm2(18pin plug)

• Total isolation of the cables during module changes

• Potential separation of all modules to the backplane bus

• EMC-proof ESD/Burst acc. EN61000-4-2/EN61000-4-4

to Level 3: 8kV/2.5kV

• Shock resistance acc. IEC 60068-2-6 / IEC 60068-2-27 (1G/12G)

• Operating temperature: 0... +55°C

• Storage temperature: -40... +85°C

• Relative humidity: 95% without condensation

• fan-less operation

Structure /

Dimensions

Installation

Operating security

Environmental

conditions

[1] CPU if double width

[2] CPU single width

[3] peripheral modules

[4] leading bars

CPU ADAM 821x Chapter 1 Principles

ADAM 8000 Manual CPU 821x – Rev 1.1 1-7

Overview CPU 821x

The ADAM CPU 821x is available in four different versions also differing in

view:

• CPU 821x PLC-CPU

• CPU 821xNET PLC-CPU with Ethernet interface

• CPU 821xDPM PLC-CPU with Profibus-DP master

• CPU 821xDP PLC-CPU with Profibus-DP slave

Every CPU 821x is available in 3 CPU performance specifications: 214,

215 and 216. There is no visual difference between these units. The

performance of the CPU 821x increases along with an increase of the

number.

Data CPU 8214 CPU 8215 CPU 8216

RAM 40kByte 80kByte 192kByte

Load memory 32kByte 64kByte 128kByte

Cycle time, bit/word operations 0.18µs / 0.78µs

Bit memory/marker 2048Bit (M0.0...M255.7)

Timer 128 (T0...T127)

Counter 256 (Z0...Z255)

Number of blocks FB / FC / DB 1024 / 1024 / 2047

Total addressing space

inputs / outputs

1024 / 1024 with 128Byte process image (PA) each

PA Inputs 1024Bit (E0.0...E127.7)

PA Outputs 1024Bit (A0.0...A127.7)

Order data

CPU 21x ADAM-8214-1BA01 ADAM-8215-1BA01 ADAM-8216-1BA01

CPU 21xNET ADAM-8214-2BT01 ADAM-8215-2BT01 ADAM-8216-2BT01

CPU 21xDPM ADAM-8214-2BM01 ADAM-8215-2BM01 ADAM-8216-2BM01

CPU 21xDP ADAM-8214-2BP01 ADAM-8215-2BP01 ADAM-8216-2BP01

Note!

If not especially specified, the information in this manual refers to all the

CPUs of the ADAM CPU 821x family!

The instruction set of the CPU 821x is compatible with STEP7 of Siemens

and is being configured by means of the Siemens STEP7 manager. A

large function library is included with the CPU.

The CPU employs a Multi Media Card (MMC) as external storage medium.

The MMC is available from Advantech.

The project engineering of the Ethernet components takes place by means

of the ADAM project configuration tool WinNCS. The data may be

transferred into the CPU via MPI.

The CPU 821x has an integrated power supply that requires DC 24V via

the front panel. It is protected against reverse polarity and short circuits.

Products

Performance

specification

General

information

Chapter 1 Principles CPU ADAM 821x

1-8 ADAM 8000 Manual CPU 821x – Rev 1.1

Hints for project engineering

For the project engineering of the CPU 821x and the other System 82xx

modules connected to the same bus, you use the hardware configurator

from Siemens.

To address the directly plugged peripheral modules, you have to assign a

special address in the CPU to every one.

The address allocation and the parameterization of the modules takes

place in the STEP7 manager from Siemens in form of a virtual Profibus

system. For the Profibus interface is standardized software sided, the

functionality is guaranteed by including a GSD-file into the STEP7

manager from Siemens.

Transfer your project into the CPU via the MPI interface.

For the project engineering of your CPU 821x the following requirements

have to be fulfilled:

• STEP7 manager from Siemens is installed at your PC resp. PU.

• The GSD-file for the System 82xx is included to the hardware

configurator

• serial connection to the CPU (e.g. via "Green Cable")

Note!

The configuration of the CPU requires a thorough knowledge of the

Siemens STEP7 manager and the hardware configurator!

The CPU 821x is configurable via the STEP7®manager from Siemens.

This means the programming and parameterization of a System ADAM

82xx and the parameterization and project engineering under Profibus-DP.

The project engineering of a CPU 821x takes place via the STEP®7 mana-

ger from Siemens in form of a virtual Profibus system with the CPU 315-

2DP as basic.

Due to the standardized Profibus interface ADAM is able to support the

complete functionality of the System 82xx family in the STEP®7 manager

from Siemens by including a GSD-file.

To be compatible with the STEP7 configuration tool from

Siemens, the following steps have to take place:

• Project the Profibus-DP master system with CPU 315-2DP

(6ES7 315-2AF01).

• Add Profibus slave with address 1.

• Include the CPU 821x at slot 0 of the slave system.

Outline

Preconditions

Compatibility to

STEP7 manager

from Siemens via

GSD-file

CPU ADAM 821x Chapter 1 Principles

ADAM 8000 Manual CPU 821x – Rev 1.1 1-9

The following steps are necessary to project a CPU 821x in the hardware

configurator from Siemens:

• Start the hardware configurator from Siemens

• Load the delivered ADAM GSD-file from Advantech

• Create a Profibus-DP master system with the CPU 315-2DP

• Include the slave system "ADAM_DP8000" from the hardware catalog in

your master system. You find this slave system in the hardware catalog

under Profibus-DP > Additional field devices > I/O > ADAM

• Assign the address 1 to your slave system, so that the CPU is able to

recognize the system as central periphery system

• Add your modules to the slave system in the same order you have

assembled them. Start with the CPU at plug-in location 0

• Include your System 82xx modules starting at plug-in location 1

CPU 821x

PB-

Adr.:1

Slot Module

0 821x-xxxx

. Expansion

. modules

PB-

Adr.:2

DP200V

When projecting a CPU 821xDPM you include the central modules like

described above. Slave systems that shall be connected to the master are

added to the already existing master system:

CPU 821xDPM central

DP slaves decentral ...

PB-

Add.:1

PB-

Adr.:3 ... 125

Slot Module

0 821x-2BM01

. central

. periphery

PB-

Add.:2

DP200V

ADAM 821x ADAM821xDP

Project

engineering

CPU 821x with

central periphery

Master projecting

of the CPU

821xDPM

Chapter 1 Principles CPU ADAM 821x

1-10 ADAM 8000 Manual CPU 821x – Rev 1.1

When configuring a CPU 821xDP, the central plugged-in modules are

parameterized like shown above.

Slave parameterization

As intelligent slave, the Profibus section maps its data areas into the

memory area of the CPU 821xDP. The assignment of the areas is fixed via

the propierties of the CPU 821xDP. These areas have to be provided with

an according PLC program.

Attention!

The length values of input and output area have to be identical to the byte

values of the master project engineering. Otherwise no Profibus communi-

cation is possible (slave failure).

Steps of project engineering in the DP master

• Configure the CPU with DP master system (address 2)

• Add Profibus slave 821xDP (GSD-file required)

• Assign Profibus input and output area starting with plug-in location 0

The following picture illustrates the project engineering:

Slave System

PB-

Addr.:1

Slot Module

0 CPU 821xDP

. Expansion

. modules

PB-

Addr.:3

DP200V

CPU21x

Slot Module

0 Output (Bytes)

1 Input (Bytes)

Master system

PB-

Addr.:2

The project engineering of network connections via TCP/IP takes place via

the configuration tool WinNCS from Advantech.

Project

engineering of the

CPU 821xDP in a

master system

Master projecting

of the CPU

821xNET

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Advantech Hardware per computer

Advantech

Advantech SOM-4463 B2 Manuale utente

Advantech

Advantech PCA-6184 Manuale utente

Advantech

Advantech TREK-550-A00E Manuale utente

Advantech

Advantech PCI-1716 Manuale utente

Advantech

Advantech ASMB-830 Series Manuale utente

Advantech

Advantech PCE-GIGE2 Manuale di installazione e funzionamento

Advantech

Advantech SOM-MZ10 Manuale di installazione e funzionamento

Advantech

Advantech PCM-3643 Manuale utente

Advantech

Advantech PCIE-1816 Manuale utente

Advantech

Advantech PCI-1752U Manuale utente

Advantech

Advantech PCE-7131 Manuale di installazione e funzionamento

Advantech

Advantech ECU-P1528PE Manuale di installazione e funzionamento

Advantech

Advantech PPC-6150A Manuale utente

Advantech

Advantech PPC-IPS Manuale utente

Advantech

Advantech PCA-6157 Manuale utente

Advantech

Advantech ASMB-816 Series Manuale utente

Advantech

Advantech MIC-3820 Manuale di installazione e funzionamento

Advantech

Advantech LGA 1700 Manuale utente

Advantech

Advantech PPC-3151 Manuale utente

Advantech

Advantech MIO-2363 Manuale utente

Advantech

Advantech PCL-740 Manuale utente

Advantech

Advantech PCIE-1756 Manuale utente

Advantech

Advantech PCL-746+ Manuale utente

Advantech

Advantech PCM-3718H Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente