Advantech PCM-26D2CA Manuale di installazione e funzionamento

Packing List

PIN Assignment

Installation

PCM-26D2CA

2-Ports Isolated CANBus mPCIe, CANOpen, DB9

Startup Manual

Before installation, please ensure that the following items

have been included in your shipment:

1. mPCIe card with CAN controller x 1

2. DB9 I/O plate x 2 with iDoor bracket x 1

3. FPC cable x 2

4. Startup manual x 1

5. Warranty card x 1

If any of the above items are missing or damaged, contact

your distributor or sales representative immediately.

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

http://www.advantech.com/eAutomation

For technical support services, please visit our support

website at:

http://www.advantech.com.tw/eservice

This manual is for the PCM-26D2CA-BE.

Part No. 204426D201

Edition 2

December 2022

The following tables and figures show the pin assignments

of the connector on the bracket to the modular card. If you

see two ports or above, it will use the same pin-definition

as this one.

CAN Port

CAN_L

GND

CAN_H

PCM module with iDoor technology supports the following

Advantech platforms:

Automation computers - UNO series

Panel PC - TPC series

Modular IPC - MIC series

SeethefollowingpageforinstallationinTPCembeddedpanel

computers and UNO embedded computers.

PCM-26D2CA Startup Manual 1

Jumper Settings

Documentation/Software Support Guide

Orange

Green

Note: TX & RX will light up at the same time when TX

performs data transmission.

You can set the terminator resistor by jumper setting if

necessary to match impedance.

PIN# of JP1

Status

Value of Terminator

Resistor

PIN 1-2 (Default)

Closed Mode

120 Ohms

PIN 2-3

Open Mode

The support documentation can be accessed from https://

www.advantech.com/support.

2 PCM-26D2CA Startup Manual

1. Remove the screws from the back plate and lift it off.

2. Remove the screws from the blanking plate.

3. Insert the PCM Module through the open slot.

4. Secure the PCM Module with the screws you removed

from the blanking plate.

Embedded Panel Computer Installation

LED Indicator

FPC Cable Installation

1. Remove the screws from the base plate and lift it to

remove it.

2. Insert the mini-PCI card and secure with the screws.

3. Remove the screws to remove the blanking plate.

4. Insert the PCM Module through the blanking plate hole

and secure with screws. Attach the PCM Module to the

mini-PCIe card with the FPC cable.

Please follow the direction as shown inthe picture.

The corresponded port was marked A/B on motherboard for

cable plug-in direction.

PCM-26D2CA Startup Manual 3

Embedded Computer Installation

Altri manuali Advantech Controllori

Advantech

Advantech ADAM-4500 Manuale utente

Advantech

Advantech B+B SmartWorx Wzzard BB-WSK-NRG-1 Guida utente

Advantech

Advantech SKY-4120B Manuale utente

Advantech

Advantech ADAM-5630 Series Manuale utente

Advantech

Advantech ADAM-5550KW Series Manuale utente

Advantech

Advantech PCL-839+ Manuale utente

Advantech

Advantech WISE-2210 Manuale di installazione e funzionamento

Advantech

Advantech ADAM-5511 Manuale utente

Advantech

Advantech MVP-3245 Series Manuale utente

Advantech

Advantech GX2-400 Manuale utente

Advantech

Advantech ADAM-5510 Series Manuale di installazione e funzionamento

Advantech

Advantech INTRAC 204 Manuale utente

Advantech

Advantech MIC-3321 Manuale di installazione e funzionamento

Advantech

Advantech APAX-5580 Manuale utente

Advantech

Advantech PCI-1760U Manuale di installazione e funzionamento

Advantech

Advantech UNO-348 Manuale utente

Advantech

Advantech MIC-1816R Manuale di installazione e funzionamento

Advantech

Advantech Celeron M Universal Network Controller with PC/104 Extension... Manuale utente

Advantech

Advantech AMAX-5580 Manuale utente

Advantech

Advantech UNO-2182 Manuale utente

Advantech

Advantech PCA-6781 Manuale di installazione e funzionamento

Advantech

Advantech ADAMView Manuale utente

Advantech

Advantech ADAM-5510/P31 Manuale utente

Advantech

Advantech LNC-5800D Manuale del proprietario

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente