Advantech ADAM-4561 Manuale utente

ADAM-4561

1-port Isolated USB to

RS-232/422/485 Converter

User’s Manual

ADAM-4561 User's Manual

Advantech’s ADAM-4561 allows PC users to connect their serial

devices to systems that use USB interface. By attaching the ADAM-

4561 to a PC, it will no longer be necessary to open the chassis or turn

off the PC to install the hub. With the ADAM-4561, the user instantly

gets one extra high-speed RS-232/422/485 ports. In addition, since the

power is derived from the USB port, there are not any cumbersome

power adapters. This makes the ADAM-4561 especially suitable for

printers, POS system and industrial control devices.

Compliant with USB v1.1, the ADAM-4561 features a lot of powerful

functions such as high-speed 115.2 Kbps, support for various operat-

ing systems, independent RS-232/422/485 port and more. By simply

plugging in a USB hub, the ADAM-4561 eliminates configuration

issues associated with expensive, antiquated card solutions. This

eliminates the need to remove the PC cover and or to reboot the

operating system during installation. The user only installs the driver,

and follows the on-screen instructions. This reduces a lot of program-

mingtime.

The USB interface, now standard on virtually all new PCs, offers

significant advantages over earlier bus types. A signal USB interface

can connect up to 127 devices at data rates up to 12 Mbps. This kind

of easy and convenient connectivity means that your network can

grow with your needs.

• Fullcompliance withUSB v1.1specifications.

• RS-232/422/485port supported

• Transmission speed up to 115.2 Kbps

• Isolation protection 3,000 VDC provided

• AutomaticRS-485 data flowcontrol

• No external power supply necessary; the ADAM-4561 derives its

power from the USB port.

• Plug-and-play installation.

• No additional IRQs or I/O ports required.

• Hot swap function supported

• Driversfor Widows98/ME/2000

1.1 Introduction

1.2 Features:

ADAM-4561 User’s Manual

•Compatibility:USBv1.1 standard

•Interface: Network:USB

Serial:3-wireRS-232,RS-422,RS-485

•Port:1Independent RS-232/422/485ports

•Connector: Network:USB-type A connector (Type A to Type B

cable provided)

Serial:twist-pair cable

•Transmissionspeed:75 bps to 115.2 Kbps

•Parity bit: odd, even, none

•Databit:5,6,7,8

•Stopbit:1,1.5,2

•RS-232Signals:Tx, Rx,GND

•Isolationprotection:3,000VDC (RS-422/485)

•DriverSupported:Windows 98/ME/2000,Linux (availablesoon)

•PowerConsumption:270mA@5V(Typical)

300mA@ 5V(Max.)

•Max.Distance:15ft(4.6m)

•Case: ABS with captive mounting hardware

•Placement:DIN-rail, panel mounting,piggyback stack

•OperatingTemperature:0° to 70°C

•StorageTemperature:-25°to 80°C

•OperatingHumidity: 20%to 95%(non-condensing)

•Storage Humidity: 0%to 95%(non-condensing)

1.3 Specifications

• ADAM-4561

• ADAM-4561User’s Manual

• Driverv1.00disk

• One Type A to Type B USB cable

• NYLONDIN-rail MountingAdapter

• SECCPanel MountingBracket

If you have any questions about USB standard, please refer to the web

site:www.usb.org

1.4 Package Checklist

ADAM-4561 User's Manual

2.1 Hardware Installation

2.1.1 Network Architecture

Traditional serial port communication uses a COM port board that

slides into one of the slots at the back of your PC. With the ADAM-

4561, you can access the COM port from USB ports. The ADAM-4561

can be integrated into the network architecture of any protocol.

Note: all the operating systems on your host must

support USB v1.1 standard, such as Windows 98/ME/

2000.USB devicesareused in“Master-Slave”

architecture.Before you use ADAM-4561, you must

determinethe masterPC.

The following illustration shows the network architecture:

Figure 2-1:Network Architecture

ADAM-4561 User’s Manual

2.1.2 Network Connection

When using the ADAM-4561, you will simply plug one end of USB

cable (included in package) into ADAM-4561, and the other end into

the USB hub or your host PC.

2.1.3 Serial Connection

The model of the ADAM-4561 that you purchased has 10 pin connec-

tor for connecting serial ports on the bottom of module. Only one set

of twisted-pair cables is required to transmit both Data and RTS

signalsfor RS-485interface.

Note: In USB v1.1 standard, If you have used the COM3, COM4…..

COMn of host PC. When you plug ADAM-4561 in the host PC, the

COMport willbe COMn+1.

Wiring for RS-232 Connection

Figure 2-2: Wiring of RS-232 Connection

ADAM-4561 User's Manual

Wiring of RS-485 Connection

Wiring of RS-422 Connection

Figure 2-3: Wiring of RS-485 Connection

Figure 2-4: wiring of RS-422 Connection

2.1.4 Jumper Settings

Jumper JP1 sets the driver enable mode selection. If jumpers JP1 is set

at “AUTO,” the driver automatically senses the direction of the data

flow and switches the direction of transmission. Handshaking is

unnecessary. If jumper JP1 is set to “On,” the driver is always enabled,

and always in high or low status. The user must select a mode before

beginning RS-422 applications.

ADAM-4561 User’s Manual

JP1:

3. Change directory to A:\

4. Select your operating system

3.1 Software Installation

3.1.1 Driver and Utility Installation

In order to use a PC to control serial devices connected to the ADAM-

4561, you must first have a host running Windows 98/ME/2000.

Following are the installation instructions to set up the ADAM-4561.

1. Insert the ADAM-4561 Driver utility diskette into the floppy drive

(e.g. A:\) on the host PC.

2.Use your Windows Explorer to e specify a default installation path

C:\Control Panel/System/Device manager. After you have specified

the installation path, click the Next button.

ADAM-4561 User's Manual

6. If you want to check if the driver is installed or not, run Device

manager.

7. Click it and you will see the detail information.

5. Click Finishbutton

Altri manuali per ADAM-4561

Indice

Altri manuali Advantech Convertitore multimediale

Advantech

Advantech B+B SmartWorx BB-485USBTB-2W-A Manuale utente

Advantech

Advantech BB-USOPTL4 Manuale utente

Advantech

Advantech B+B SmartWorx PoE Giga-McBasic Manuale utente

Advantech

Advantech B+B SmartWorx MiniMc TP-TX/FX Manuale utente

Advantech

Advantech USB-4600 Series Manuale utente

Advantech

Advantech IMC-574I-SFP Manuale utente

Advantech

Advantech SSPBM-K80-BTE Manuale utente

Advantech

Advantech BB-USO9ML2-A Manuale utente

Advantech

Advantech BB-485LDRC9 Manuale utente

Advantech

Advantech B+B SmartWorx 485USB9F-2W Manuale utente

Advantech

Advantech BB-USR604 Manuale utente

Advantech

Advantech EKI-2541S/SC Manuale utente

Advantech

Advantech ADAM-4561-CE Manuale utente

Advantech

Advantech B+B SmartWorx IE-ModeConverter Manuale utente

Advantech

Advantech ADAM-4541 Manuale utente

Advantech

Advantech PCIE-1182 Manuale di installazione e funzionamento

Advantech

Advantech B+B SmartWorx Giga-MiniMc TX-SX Manuale utente

Advantech

Advantech PCL-833 Manuale utente

Advantech

Advantech B+B SmartWorx 485OI9TB Manuale utente

Advantech

Advantech SSPBM-K125-BTE Manuale utente

Advantech

Advantech B+B SmartWorx IMcV-10G Manuale utente

Advantech

Advantech BB-485DRCI-PH Manuale utente

Advantech

Advantech ADAM-6542 Manuale utente

Advantech

Advantech B+B SmartWorx 485DRCI-PH Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente