Advantech FPM-3150 Series Manuale utente
FPM-3150 Series
Flat Panel Monitor with
15" Color TFT/LCD Display
User's Manual
ii
Copyright Notice
This document is copyrighted by Advantech Co., Ltd. All rights are
reserved. Advantech Co., Ltd. reserves the right to make
improvements to the products described in this manual at any time.
Specifications are thus subject to change without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this manual
is intended to be accurate and reliable. However, Advantech Co., Ltd.,
assumes no responsibility for its use, nor for any
infringements upon the rights of third parties which may result from its
use.
All brand and product names mentioned herein are trademarks or
registered trademarks of their respective holders.
FCC Class A
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy. If not installed and used in accordance with this
user's manual, it may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
PartNo.2002315000
1st Edition Printed in Taiwan Aug. 2000
iii
Packing List
Before installing your equipment, make sure that the following
materials have been received:
• FPM-3150Series flatpanel monitor
• Accessory pack, including:
- AC/DC adapter (optional)
- Power Chord (optional)
- Video signal cable
- Component bag
- RS-232cable
- Screw bag
- Touchscreen driverdisks forWin95/98/NT(FPM-3150TV-Tonly)
- FPM-3150Series User's Manual
If any of these items are missing or damaged, contact your
distributor or sales representative immediately.
Additional Information and Assistance
1. Visitthe Advantech website atwww.advantech.comwhere youcan
find the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's
customer service center for technical support if you need
additional assistance. Please have the following information ready
before you call:
• Product name and serial number
• Description of your peripheral attachments
• Description of your software (operating system, version,
application software, etc.)
• A complete description of the problem
• The exact wording of any error messages
iv
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User's Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be opened
only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according to
the user's manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW
-20° C (-4° F) OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE
EQUIPMENT.
The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70dB(A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
v
Wichtige Sicherheishinweise
1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.
2. Heben Sie diese Anleitung für den späteren Gebrauch auf.
3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen.
Verwenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient
ein angefeuchtetes Tuch zur Reinigung.
4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht
zugänglichsein.
5. Das Gerät ist vor Feuchtigkeit zu schützen.
6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein
Kippen oder Fallen könnte Verletzungen hervorrufen.
7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor
überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht
abgedecktwerden.
8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.
9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen
kann. Es sollte auch nichts auf der Leitung abgestellt werden.
10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu
beachten.
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten
Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspan-
nung eine Beschädigung vermieden.
12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder
Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.
elektrischen Schlag auslösen.
13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der
elektrischen Sicherheit nur von authorisiertem Servicepersonal
geöffnet werden.
14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu
trennen und von einer qualifizierten Servicestelle zu überprüfen:
a - Netzkabel oder Netzstecker sind beschädigt.
b - Flüssigkeit ist in das Gerät eingedrungen.
c - Das Gerät war Feuchtigkeit ausgesetzt.
d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend
funktioni ert oder Sie mit Hilfe dieser Anleitung keine
Verbesserung erzielen.
e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.
f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.
Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt
70dB(A) oder weiger.
DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
vi
Contents
CHAPTER 1 Introduction............................................... 1
1.1Introduction ..............................................................................2
1.2Specifications ...........................................................................2
1.3 LCD Specification....................................................................3
1.4 Power Consumption .................................................................3
1.5 Connectors ...............................................................................4
1.6 Dimensions ...............................................................................5
CHAPTER2 System Setup............................................... 7
2.1 Mounting the Monitor ...............................................................8
2.1.1 Wall Mounting..............................................................................8
2.1.2 Panel Mounting ........................................................................ ...9
2.1.3 Rack Mounting ..........................................................................10
2.2 Desktop, Swing-ARM for FPM-3150TV .............................. 11
2.2.1 Desktop Stand .......................................................................... 11
2.2.2 Swing-ARM ................................................................................12
APPENDIX A Touchscreen Driver Installation ........... 13
A.1 Introduction ...........................................................................14
A.2 Touchscreen Specification ....................................................14
A.3 Installation of Touchscreen Driver........................................15
A.3.1 Installation for Windows 95/98 .................................................16
A.3.2 Installation forWindows NT.......................................................18
A.3.3 Installation for DOS ...................................................................20
A.3.3.1 Using "INSTALL.EXE" utility to install PenMount software
driver. .................................................................................................20
A.3.3.2 Identify the communication port and IRQ number................20
A.3.3.3 Do Calibration .......................................................................21
A.3.3.4 Initializing the PenMount driver ...........................................21
A.3.3.5Demonstration .......................................................................21
A.3.3.6 PenMount DOS driver functions ..........................................22
Appendix B Standard Timing
vii
Set Serial Data for Expansion ................... 23
B.1 Setting serial data for expansion............................................24
APPENDIX C OSD Selection........................................ 27
C.1Introduction:...........................................................................28
C.2 Menu:.....................................................................................28
C.3 Auto Adjust ...........................................................................28
C.4 Brightness..............................................................................29
C.5 Clock .....................................................................................29
C.6 Position ..................................................................................29
C.7 Contrast .................................................................................30
C.8 Color Level............................................................................30
C.9 Information ............................................................................31
C.10 OSD Position .......................................................................31
C.11 All Reset ..............................................................................31
viii
Figures
Figure 1-6 Dimensions: FPM-3150TV (15") .................................................5
Figure 2-1: Wall mounting.............................................................................. 8
Figure 2-2: Panel Mounting (cut out dimension: 434mm x 316mm) ..........9
Figure 2-3: Rack Mounting by rackmount brackets .................................10
Figure 2-4: Desktop Stand for the FPM-3150 series................................. 11
Figure 2-5: Swing-ARM for the FPM-3150 series .....................................12
Introduction
This chapter includes:
•Introduction
•Specifications
•LCDSpecification
•Power Consumption
•Connectors
•Dimensions
CHAPTER
1
2
FPM-3150 User's Manual
1.1 Introduction
Advantech's FPM-3150 Series is a 15" color TFT LCD flat panel
monitor built specifically for industrial applications. With the optional
touchscreen, the FPM-3150 Series is an excellent and user-friendly
system control interface.
With a viewing size as large as 15", it represents an ample display area
as well as vivid and sharp images for your HMI application. FPM-3150
features Direct-VGA signal transmission, which allows a regular VGA
control card to be used on your system. Users can thus upgrade his
display without making changes to the existing system. Its On-screen
Display function also allows users to adjust the images on screen with
ease. The whole chassis is of stainless steel, and the front panel is of
aluminumwith NEMA4/IP65 compliance.
1.2 Specifications
General
• Construction: Heavy-duty aluminum and steel chassis
• Frontpanel:NEMA4 (IP 65)
• Control:OSD (On Screen Display) control pad on front side
• Mounting:Panelmount orwallmount
• Dimensions(WxHxD):402x322x75mm(15.83"x12.68"x2.95")
• Weight: 9.5kg (20.1lb)
Touchscreen (Optional)
• Type:8wire, analogresistive
• Resolution: continuous
• Lighttransmission: 72%(surface meetsASTM-D-3363-92A
Standard, tabler abrasion test)
• Operating Pressure: 30 ~ 45 gram for stylus pen, contact bounce <
10ms
• Controller:RS-232interface
• PowerConsumption:+5V@200mA
Altri manuali per FPM-3150 Series
1
Indice
Altri manuali Advantech Monitor
Advantech
Advantech IDK-1110WR-series Manuale utente
Advantech
Advantech USC-250 Manuale di installazione e funzionamento
Advantech
Advantech PAX-327-C2 Series Manuale utente
Advantech
Advantech ProFlat IDP-31215W Manuale utente
Advantech
Advantech FPM-3155 Series Manuale utente
Advantech
Advantech iHealthcare POC-W213 Manuale di istruzioni
Advantech
Advantech IDS-3110 Series Manuale utente
Advantech
Advantech FPM-3060G Series Manuale utente
Advantech
Advantech IDS-3210 Series Manuale utente
Advantech
Advantech KT-D213U8B Manuale utente
Advantech
Advantech IDS-3206 Series Manuale utente
Advantech
Advantech FPM-3100H Series Manuale utente
Advantech
Advantech IDK-2117 Series Manuale utente
Advantech
Advantech KT-E240FEE Manuale di istruzioni
Advantech
Advantech FPM-2150G Series Manuale utente
Advantech
Advantech KT-E320FEE Manuale utente
Advantech
Advantech IDP-31101W Manuale utente
Advantech
Advantech IDS-3118W Series Manuale utente
Advantech
Advantech IDS-3215 Series Manuale utente
Advantech
Advantech IDK-2119 Series Manuale utente
