Advantech EKI-7529MI Manuale utente

EKI-7529MI,

EKI-7529MI/ST

8+2 100 FX Port Unmanaged

Industrial Ethernet Switch

User Manual

The documentation and the software included with this product are copyrighted 2009 by

Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make

improvements in the products described in this manual at any time without notice. No part of

this manual may be reproduced, copied, translated or transmitted in any form or by any

means without the prior written permission of Advantech Co., Ltd. Information provided in this

manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no

responsibility for its use, nor for any infringements of the rights of third parties, which may

result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Part No.

Printed in China 4th Edition

October 2009

EKI-7529MI_7529MIST_Manual_ed4 ii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by persons

other than repair personnel authorized by Advantech, or which have been subject to misuse,

abuse, accident or improper installation. Advantech assumes no liability under the terms of

this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of our

customers never need to use our repair service. If an Advantech product is defective, it will be

repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you

will be billed according to the cost of replacement materials, service time and freight. Please

consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU speed,

Advantech products used, other hardware and software used, etc.) Note anything

abnormal and list any onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and any

helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return more

quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement Order

Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable

container. A product returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid to your

dealer.

iii

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test conditions for

passing included the equipment being operated within an industrial enclosure. In order to

protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage,

we strongly recommend the use of CE-compliant industrial enclosure products.

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech’s customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, application software,

etc.)

- A complete description of the problem

- The exact wording of any error messages

EKI-7529MI_7529MIST_Manual_ed4 iv

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not

use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equipment and

must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may

cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the equipment to

the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened only by

qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according to the user's

manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE

TEMPERATURE MAY GO BELOW -40℃(-40℉) OR ABOVE 85℃(185℉). THIS

COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A

CONTROLLED ENVIRONMENT.

EKI-7529MI_7529MIST_Manual_ed4 vi

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from damage.

1. To avoid electrical shock, always disconnect the power from your PC chassis before you

work on it. Don't touch any components on the CPU card or other cards while the PC is

on.

2. Disconnect power before making any configuration changes. The sudden rush of power

as you connect a jumper or install a card may damage sensitive electronic components.

Contents

Chapter 1 Overview...........................................2

1.1 Introduction.........................................................2

1.1.1 High-Speed Transmissions .......................2

1.1.2 Dual Power Input.......................................2

1.1.3 Flexible Mounting ......................................2

1.1.4 Advanced Protection .................................2

1.1.5 Wide Operating Temperature....................2

1.1.6 Easy Troubleshooting................................2

1.2 Features..............................................................3

1.3 Specification .......................................................4

1.4 Packing List ........................................................6

1.5 Safety Precaution ...............................................6

Chapter 2 Installation........................................8

2.1 LED Indicators....................................................8

Table 2.1: EKI-7529MI, EKI-7529MI/ST LED

Definition.......................................................................8

Table 2.2: EKI-7529MI, EKI-7529MI/ST DIP

Definition.......................................................................8

2.2 Dimensions (units: mm)......................................9

Figure 2.1: Front View of EKI-7529MI, EKI-

7529MI/ST.....................................................................9

Figure 2.2: Side View of EKI-7529MI, EKI-

7529MI/ST...................................................................10

Figure 2.3: Rear View of EKI-7529MI, EKI-

7529MI/ST...................................................................11

Figure 2.4: Top View of EKI-7529MI, EKI-7529MI/ST

.....................................................................................11

2.3 Mounting...........................................................12

2.3.1 Wall mounting..........................................12

Figure 2.5: Combine the Metal Mounting Kit.............12

2.3.2 DIN-rail Mounting.....................................13

Figure 2.6: Installation to DIN-rail Step 1...................13

Figure 2.7: Installation to DIN-rail Step 2...................14

2.4 Network Connection .........................................15

2.5 Power Connection ............................................15

Figure 2.8: Pin Assignment of the Power Connector..15

Chapter 3 Troubleshooting ............................17

Appendix A Pin Assignment & Wiring...........19

Figure A.1: RJ-45 Pin Assignment..............................19

Figure A.2: EIA/TIA-568B .........................................19

Figure A.2: EIA/TIA-568A.........................................19

vii Contents

EKI-7529MI_7529MIST_Manual_ed4 viii

1 Chapter1

Overview

Sections include:

zIntroduction

zFeatures

zSpecifications

zPacking List

zSafety Precaution

CHAPTER

Chapter 1 Overview

1.1 Introduction

Aside from 8 x 10/100Base-TX fast Ethernet ports, the EKI-7529MI, EKI-7529MI/ST

comes equipped with 2 x 100 Mbps fiber expansion ports. Also, the long MTBF (Mean

Time Between Failures) ensures that the EKI-7529MI, EKI-7529MI/ST is a cost-

effective solution and meets the high reliability requirements demanded by industrial

applications.

1.1.1 High-Speed Transmissions

The EKI-7529MI, EKI-7529MI/ST includes a switch controller that can automatically

sense transmission speeds (10/100 Mbps). The RJ-45 interface can also be auto-

detected, so MDI or MDI-X is automatically selected and a crossover cable is not

required. All Ethernet ports have memory buffers that support the store-and-forward

mechanism. This assures that data is properly transmitted.

1.1.2 Dual Power Input

EKI-7529MI, EKI-7529MI/ST redundant power input design is with power reserve

protection to prevent the switch device broken by wrong power wiring. When one of

power input is fail, P-Fail LED will turn on and send an alarm through a relay output for

notifying user.

1.1.3 Flexible Mounting

EKI-7529MI, EKI-7529MI/ST is extremely compact (79 x 152 x 105 mm) and can be

mounted on a DIN-rail or a panel, so it is suitable for any space-constrained

environment.

1.1.4 Advanced Protection

EKI-7529MI, EKI-7529MI/ST supports up to 3,000 VDC EFT protection for power line,

and also supports 4,000VDC ESD protection for Ethernet ports. With these 2 strong

protections, it can secure equipment against unregulated voltage and make systems

safer and more reliable. Further, EKI-7529MI, EKI-7529MI/ST provides currency

overload protection with a resettable fuse to ensure that the device component won’t

be damaged by overload current.

1.1.5 Wide Operating Temperature

The operating temperature of the EKI-7529MI, EKI-7529MI/ST is between -40 ~ 75 ℃.

With such a wide range, you can use the EKI-7529MI, EKI-7529MI/ST in some of the

harshest industrial environments that exist.

1.1.6 Easy Troubleshooting

LED indicators make troubleshooting quick and easy. Each 10/100 Base-TX port has 2

LEDs that display the link status, transmission speed and collision status. Also the

three power indicators P1, P2 and P-Fail help you diagnose immediately.

EKI-7529MI_7529MIST_Manual_ed4 2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Advantech Router di rete

Advantech

Advantech XR5i v2 Guida

Advantech

Advantech UR5i v2 Libratum Istruzioni per l'installazione e il funzionamento

Advantech

Advantech RR75i v2 Manuale utente

Advantech

Advantech Libratum ICR-2834 Guida

Advantech

Advantech ICR-2631 Manuale utente

Advantech

Advantech SmartFlex SR307 Manuale utente

Advantech

Advantech EKI-4524I Manuale utente

Advantech

Advantech ER75s Manuale utente

Advantech

Advantech XR5i v2 Guida

Advantech

Advantech ICR-2531 Manuale utente

Advantech

Advantech SmartMotion ST352 Manuale utente

Advantech

Advantech ICR-2437 Manuale utente

Advantech

Advantech ICR-2031 Guida

Advantech

Advantech EKI-1222R-CE Manuale utente

Advantech

Advantech SmartFlex SR308 Manuale utente

Advantech

Advantech B+B SmartWorx SmartMotion ST355 Manuale utente

Advantech

Advantech ICR-1601 Manuale utente

Advantech

Advantech ICR-2412 Manuale utente

Advantech

Advantech UR5i v2 Libratum Manuale utente

Advantech

Advantech ICR-3232 Manuale utente

Advantech

Advantech SmartFlex SR304 Manuale utente

Advantech

Advantech B+B SmartWorx ER75i v2 Manuale utente

Advantech

Advantech ICR-4434 Manuale utente

Advantech

Advantech B+B SMARTWORX SmartStart SL302 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza