Advantech MIC-3666 Manuale utente
User Manual
MIC-3666
Dual 10 Gigabit Ethernet XMC
MIC-3666 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2010
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel®and Pentium®are trademarks of Intel®Corporation.
Microsoft®Windows®and MS-DOS are registered trademarks of Microsoft®Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Part No. 20023666001 Edition 2
Printed in Taiwan October 2017
iii MIC-3666 User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Please contact your local supplier for
ordering information.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
FM
This equipment has passed the FM certification. According to the National Fire Pro-
tection Association, work sites are classified into different classes, divisions and
groups, based on hazard considerations. This equipment is compliant with the speci-
fications of Class I, Division 2, Groups A, B, C and D indoor hazards.
Technical Support and Assistance
1. Visit the Advantech web site at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
MIC-3666 User Manual iv
Warnings, Cautions and Notes
Document Feedback
To assist us in making improvements to this manual, we would welcome comments
and constructive criticism. Please send all such - in writing to: support@advan-
tech.com.
Warning! Warnings indicate conditions, which if disregarded, can cause personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.:
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Note! Notes provide optional additional information.
v MIC-3666 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
MIC-3666 User Manual vi
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power (electrostatic discharge) as you connect a jumper or install a card may
damage sensitive electronic components.
We Appreciate Your Input
Please let us know of any aspect of this product, including the manual, which could
use improvement or correction. We appreciate your valuable input in helping make
our products better.
vii MIC-3666 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Specifications ............................................................................................ 3
1.2.1 Ethernet ........................................................................................ 3
1.2.2 PCI Express .................................................................................. 3
1.2.3 Power Consumption...................................................................... 3
1.2.4 Mechanical and Environmental Specifications.............................. 3
1.2.5 Software Support .......................................................................... 3
1.2.6 Compliance ................................................................................... 3
1.3 Safety Precautions .................................................................................... 4
Chapter 2 Hardware and Driver Installation .......5
2.1 Initial Inspection ........................................................................................ 6
2.2 Connector Locations ................................................................................. 6
2.3 Card Installation ........................................................................................ 7
2.4 Front Panel LED Indicators ....................................................................... 7
Figure 2.1 MIC-3666 front panel LEDs ........................................ 7
2.5 Driver/Utility Installation............................................................................. 7
Appendix A Pin Assignments .................................9
A.1 P15 Connector ........................................................................................ 10
Table A.1: MIC-3666 XMC Connector P15 Pin Assignments .... 10
MIC-3666 User Manual viii
Chapter 1
1General Information
MIC-3666 User Manual 2
1.1 Introduction
The MIC-3666 is a low power, dual-port 10 GbE XMC, with SFP+ pluggable modules
for multi-mode and single-mode fiber media and is based on the Intel® 82599ES 10
Gigabit Ethernet controller. The XMC provides a high performance PCIe x8 interface
at 5 Gb/s per lane at an outstanding low power dissipation of less than 10 W. Support
for Intel’s offloading and platform enhancement features yields maximum network
throughput while preserving valuable CPU cycles for application processing.
The MIC-3666 features an Intel® 82599 which provides Intel® Virtualization Technol-
ogy for Connectivity (VT-c) including Virtual Machine Device Queues (VMDq) and
PCI SIG compliant Single Root I/O Virtualization (SR-IOV), helping to reduce I/O bot-
tlenecks, boost throughput, and reduce latency. Where virtualization is required,
VMDqs improve performance by offloading the data-sorting burden from the virtual
machine manager (VMM) to the network controller. The MIC-3666’s specialized fea-
tures include Layer 2 & 3 security with IPSec & LinkSec; Intel® I/OAT Acceleration
Technology v3.0; VLAN tagging, stripping and packet filtering; and TCP, iSCSI, and
Fiber Channel over Ethernet (FCoE) offload.
Indice
Altri manuali Advantech Router di rete
Advantech
Advantech ICR-2000 Guida
Advantech
Advantech ICR-3201 Series Manuale utente
Advantech
Advantech ICR-4401 Manuale utente
Advantech
Advantech SmartFlex SR309 Manuale utente
Advantech
Advantech Libratum ICR-2834 Manuale utente
Advantech
Advantech B+B SmartWorx SE416 Manuale utente
Advantech
Advantech ICR-3201 Series Guida
Advantech
Advantech UR5i v2 Libratum Guida
Advantech
Advantech EKI-1222R-CE Manuale utente
Advantech
Advantech EDG-6528 Manuale utente
Advantech
Advantech SmartFlex SR307 Manuale utente
Advantech
Advantech SmartStart SL306 Manuale utente
Advantech
Advantech Bivias v2 Manuale utente
Advantech
Advantech ICR-1601G Foglio di istruzioni
Advantech
Advantech Libratum ICR-2834 Guida
Advantech
Advantech SmartMotion ST355 Manuale utente
Advantech
Advantech SmartFlex SR308 Manuale utente
Advantech
Advantech ICR-3201 Series Manuale utente
Advantech
Advantech SmartFlex SR306 Manuale utente
Advantech
Advantech LR77 v2 Libratum Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza