Advantech XR5i v2 Guida

Start Guide

for v2 Routers

Start Guide

Safety Instructions

Please take care to following instructions:

•Use the router in compliance with national and international law and compliance with any

special or additional restrictions regulating the use of the router in various applications

and environments.

•To avoid possible injury and/or damage to the device, observe the relevant provisions

and standards. Use only the original accessories as recommended. Unauthorized de-

vice or accessory modiﬁcation or using accessories that have not been approved can

result in router damage and/or violation of the regulations.

•Unauthorized device or accessory modiﬁcation or using accessories that have not been

approved can result in warranty termination.

•Do not open the router.

•Caution! Small children can swallow the SIM card.

•When connecting the device to a power supply, do not exceed the deﬁned voltage.

•Do not expose the router to extreme ambient conditions. Protect the router against dust,

moisture, and high temperature.

•It is recommended that you do not use the router at petrol ﬁlling stations. We recommend

observing local restrictions concerning radio-based devices while working with explosive

material, such as petrol ﬁlling stations or in chemical plants.

•While using the router close to personal medical devices, such as cardiac pacemakers

or hearing aids, proceed with heightened caution.

•Operating the router too close to TV sets, radio receivers, personal computers, or tele-

phones can cause interference.

•It is recommended that you create a copy or backup of the basic settings stored in the

router’s memory.

QSG-0001-EN, October 5, 2022 1Released in the Czech Republic

Start Guide

Product Disposal Instructions

The WEEE (Waste Electrical and Electronic Equipment: 2012/19/EU) direc-

tive has been introduced to ensure that electrical/electronic products are recy-

cled using the best available recovery techniques to minimize the environmental

impact. This product contains high-quality materials and components which can

be recycled. At the end of its life, this product MUST NOT be mixed with other

commercial waste for disposal. Check with the terms and conditions of your sup-

plier for disposal information.

Open Source Software License

The software in this device uses various pieces of open-source software governed by the

following licenses:

•GPL versions 2 and 3

•LGPL version 2

•BSD-style licenses

•MIT-style licenses

The list of components, together with complete license texts, can be found on the device

itself. See the Licenses link at the bottom of the router’s main Web page (General Status)

or point your browser to this address (replace the DEVICE_IP string with the real router’s IP

address):

http://DEVICE_IP/licenses.cgi

This is a written offer valid for three years since the device purchase, offering any third party

for a charge no more than the cost of physically performing source distribution, a complete

machine-readable copy of the corresponding source code on a ﬂash drive medium. If you are

interested in obtaining the source, please get in touch with us at:

cellularsales@advantech-bb.com

Modiﬁcations and debugging of LGPL-linked executables:

The device manufacturer with this grants the right to use debugging techniques (e.g., de-

compilation) and make customer modiﬁcations of any executable linked with an LGPL library

for its purposes. Note these rights are limited to the customer’s usage. No further distribution

of such modiﬁed executables and no transmission of the information obtained during these

actions may be done.

QSG-0001-EN, October 5, 2022 2Released in the Czech Republic

Start Guide

First Use

Before applying power to the router, connect all the components you need for your appli-

cations.

Do not run the router without an antenna connected to the main antenna connector. The

energy from the transmission is effectively reﬂected by the open end and can damage

the equipment.

XR5i v2 routers are not equipped with a cellular module, which means that SIM card

readers and antenna connectors are not available on the router.

1. Antenna

Use an SMA connector to connect the antennas to the router; see the ﬁgure below. First,

connect the main antenna to the ANT connector. Next, connect the second diversity antenna

to the DIV connector to improve the quality and reliability of a wireless link.

QSG-0001-EN, October 5, 2022 3Released in the Czech Republic

Start Guide

2. SIM Card

The SIM card reader for one or two Mini SIM cards (2FF with size of 25.0 x 15.0 x 0.76 mm)

is located on the router’s front panel. The full version of the router contains two readers. If you

intend to use this device to communicate over a cellular network, please place an activated

data-provisioned SIM card into the SIM card reader. Insert your SIM card into the SIM1 or

SIM2 holder and push it to the reader, see the ﬁgure below. You can install two SIM cards

simultaneously to utilize the SIM card switching feature.

Disconnect the router from the power supply before handling the SIM card!

3. Power

The router requires an external DC power supply. The DC voltage required is between

+10 and +30 V DC. The router has built-in protection against reverse polarity without signaling.

Connect the power supply cable to the PWR connector on the router’s front panel (see the

ﬁgure below) and tighten the locking screws.

QSG-0001-EN, October 5, 2022 4Released in the Czech Republic

Start Guide

4. Ethernet

For an initial conﬁguration made in a web browser, connect a PC by an Ethernet cable to

the default LAN interface, use the ETH port; see the ﬁgure above. By default, this interface

has the following conﬁguration:

Connector Purpose Default Setting

ETH LAN port (default)

Connect your PC to this port to get the

router web interface.

DHCP Server

IP Address: 192.168.1.1

NetMask: 255.255.255.0

If the router is equipped with any expansion port, connect the appropriate cable to the port

PORT1 or PORT2. The pin assignments for expansion ports is described in manual for corre-

sponding expansion port.

Conﬁguration

1. Conﬁguring the Device Using the Web Browser

You can use a web browser running on your PC to access the router web interface. Here

you can perform router monitoring, conﬁguration, and administration. First, connect the PC to

the default LAN interface described in the Ethernet chapter. To get the router interface, enter

the https://192.168.1.1 address in a web browser. Please note that usage of the HTTPS

protocol for secure communication over the network is required.

There is just the root user account created on the router by default. See the product

label on the router for its default password1. Log in to the web interface by the root user

and his password. See the conﬁguration manual of the router for a detailed description and

examples of the router conﬁguration.

2. Conﬁguring the Device Using the SSH or Telnet

Device management can be done by accessing the device through the Secure Shell (SSH)

or the Telnet protocol. The default IP address of the device is 192.168.1.1. Standard TCP

ports are used, 22 for the SSH and 23 for the Telnet. Please note, that access is permitted for

users of the admin role only and that the Telnet protocol is disabled by default. For a detailed

description of SSH and Telnet conﬁguration, see the Conﬁguration Manual.

1If the label does not contain a unique password, use "root" string as the password.

QSG-0001-EN, October 5, 2022 5Released in the Czech Republic

Start Guide

2. Conﬁguration Settings via WebAccess/DMP

Your router has been pre-installed with the WebAccess/DMP client, which has activated

the connection to the WebAccess/DMP server by default. You can disable this connection on

the Welcome page when logging into the router’s web interface or on the (Customization ->

Router Apps -> WebAccess/DMP Client) conﬁguration page. For more information see the

conﬁguration manual of your router, chapter Basic Information -> WebAccess/DMP Conﬁgu-

ration.

The activated client periodically uploads router identiﬁers and conﬁguration to the Web-

Access/DMP server.

4. Restoring and Backing up the Router Conﬁguration

The default factory settings will replace the current conﬁguration if you reset the router.

Therefore, we recommend you back up the router conﬁguration before resetting the device.

Refer to the conﬁguration manual for more information.

You can restore the default router conﬁguration once the router boots up and the PWR

LED starts blinking. To do so, press the RST button on the router’s front panel for more than

4 seconds. After you press this button, all settings reset to the default values, and the router

will reboot.

After logging on to the device for the ﬁrst time, we strongly recommend changing the

default password due to security reasons. Simultaneously, you will gain access to all

functions of the router.

For security reasons, we highly recommend updating the router’s ﬁrmware to the latest

version regularly. Downgrading the ﬁrmware to an older version than the production

version or uploading ﬁrmware intended for a different device may cause the device’s

malfunction.

QSG-0001-EN, October 5, 2022 6Released in the Czech Republic

Start Guide

Support

All product-related manuals, documents, and software can be found and downloaded on

the website at icr.advantech.cz/download address.

We, Advantech Czech s.r.o., declare that the radio equipment type LR-77-

v2L complies with Directive Radio Equipment Regulations 2017 (S.I. 2017 No.

1206).

We, Advantech Czech s.r.o., declare that the radio equipment type CR10 v2,ER75i

v2,LR77 v2,LR77 v2 Libratum,RR75i v2,UR5i v2,UR5i v2 Libratum,XR5i v2,

and XR5i v2E (WiFi versions) comply with Directive 2014/53/EU. Furthermore, XR5i

v2 and XR5i v2E (non-WiFi versions) comply with the essential requirements and

other relevant provisions of Directives 2014/30/EU and 2014/35/EU.

The full text of the EU Declaration of Conformity is available at the following internet address:

icr.advantech.cz/eudoc

QSG-0001-EN, October 5, 2022 7Released in the Czech Republic

Altri manuali per XR5i v2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Advantech Router di rete

Advantech

Advantech SmartStart SL304 Manuale utente

Advantech

Advantech B&B SmartWorx ESWGP506-2SFP-T Manuale utente

Advantech

Advantech EKI-2525 Manuale utente

Advantech

Advantech ICR-2631 Manuale utente

Advantech

Advantech EKI2726FHPI Series Manuale di installazione e funzionamento

Advantech

Advantech ADAM-6520 Series Manuale utente

Advantech

Advantech ICR-1601 Guida

Advantech

Advantech CR10 v2 Manuale utente

Advantech

Advantech Bivias v2 Manuale utente

Advantech

Advantech ICR-4434 Manuale utente

Advantech

Advantech ICR-3211 Guida

Advantech

Advantech ICR-2437 Manuale utente

Advantech

Advantech ICR-2436 Manuale utente

Advantech

Advantech ICR-3201 Series Manuale utente

Advantech

Advantech XR5i v2 Guida

Advantech

Advantech ICR-1601 Manuale utente

Advantech

Advantech SmartFlex SR304 Manuale utente

Advantech

Advantech ICR-2041 Manuale utente

Advantech

Advantech ICR-2000 Guida

Advantech

Advantech ESWGP510-2SFP-T Manuale utente

Advantech

Advantech LR77 v2 Libratum Manuale utente

Advantech

Advantech ICR-2030 Manuale utente

Advantech

Advantech MIC-3666 Manuale utente

Advantech

Advantech B+B Smartworx SEC510-2SFP-T Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza