AEG WS22-230 Manuale utente
WS22-230
Original instructions
Important!
It is essential that you read the instructions in this manual
before assembling, operating and maintaining the product.
Subject to technical modifications.
11
1616
Technical Data, Safety Instructions, Specified Conditions of Use,
Declaration of Conformity, Mains connection, Maintenance, Symbols
Please read and save
these instructions!
English
22
Accessory
III
I II
IV V VI
VIIIVII
1. Spindle lock button
2. Wheel guard lock screw
3. Grinding wheel
4. Grinding guard
5. Auxiliary handle
6. On/o switch
7. Handle
* Optional accessory. Accessories may vary depending on the kit purchased.
13 14
8
3
109 11 12
1
5
4
3
2
7
6
8. Wrench
9. Hex key
10. Locking flange 45 mm
(Diameter of contact area 41 mm)
11. Backing flange 78 mm
12. Locking flange 78 mm
13. Cutting disc*
14. Cutting guard*
33
Accessory
III
I II
IV V VI
VIIIVII
1. Spindle lock button
2. Wheel guard lock screw
3. Grinding wheel
4. Grinding guard
5. Auxiliary handle
6. On/o switch
7. Handle
* Optional accessory. Accessories may vary depending on the kit purchased.
13 14
8
3
109 11 12
1
5
4
3
2
7
6
8. Wrench
9. Hex key
10. Locking flange 45 mm
(Diameter of contact area 41 mm)
11. Backing flange 78 mm
12. Locking flange 78 mm
13. Cutting disc*
14. Cutting guard*
44
4
II
1.
3.2.
2
1
III
I
55
4
II
1.
3.2.
2
1
III
I
66
III
For your safety the flange nut must be fully tightened
before starting to work with the angle grinder
Your AEG Angle Grinder has been supplied with two dierent outer flange nuts
A & B, please familiarise yourself with the specific use of each nut before
attaching an abrasive wheel to the angle grinder.
Instruction for selecting and using the correct outer
flange nut.
CUTTING FLANGE NUT
Diameter: Ø78 mm
Recommended for use with
flat cut-o wheels up to a
maximum thickness of 6mm
Recommended for use with depressed
centre grinding wheels with a
thickness greater than 6.0mm
Also recommended for use with
depressed centre cutting wheels up
to a maximum thickness of 6mm
STANDARD OUTER FLANGE NUT
Diameter: Ø45 mm
(Diameter of contact area: Ø41 mm)
<6mm >6mm
<6mm
A B
77
III
For your safety the flange nut must be fully tightened
before starting to work with the angle grinder
Your AEG Angle Grinder has been supplied with two dierent outer flange nuts
A & B, please familiarise yourself with the specific use of each nut before
attaching an abrasive wheel to the angle grinder.
Instruction for selecting and using the correct outer
flange nut.
CUTTING FLANGE NUT
Diameter: Ø78 mm
Recommended for use with
flat cut-o wheels up to a
maximum thickness of 6mm
Recommended for use with depressed
centre grinding wheels with a
thickness greater than 6.0mm
Also recommended for use with
depressed centre cutting wheels up
to a maximum thickness of 6mm
STANDARD OUTER FLANGE NUT
Diameter: Ø45 mm
(Diameter of contact area: Ø41 mm)
<6mm >6mm
<6mm
A B
88
IV
Use only spindle nuts as provided by the manufacturer.
Do not use any keyless nuts!
1. 2.
3. 4.
>6mm
IV
1. 2.
3. 4.
Indice
Altri manuali AEG Macinacaffè
AEG
AEG WS 24-180 Manuale utente
AEG
AEG WS 10-115 Manuale utente
AEG
AEG AG 8-100 Manuale utente
AEG
AEG HEAVY DUTY AGV 13-125 XE Manuale utente
AEG
AEG WS 7-100 M Manuale utente
AEG
AEG WS 9-115 Manuale utente
AEG
AEG WS 72-125 Manuale utente
AEG
AEG WSC 14-125 MX Manuale utente
AEG
AEG WS 1000-125 X Manuale utente
AEG
AEG BEWS18-115BLPX2 Manuale utente
AEG
AEG BEWS18-115 X Manuale utente
AEG
AEG POWERTOOLS WS 21-180 Manuale utente
AEG
AEG WS 8-100 Manuale utente
AEG
AEG WS 22-180 Manuale utente
AEG
AEG BEWS18-115BLPX Manuale utente
AEG
AEG GSL 600 E Manuale utente
AEG
AEG WS 12-125 MX Manuale utente
AEG
AEG BEWS18-115X Manuale utente
AEG
AEG SE 12-180 Manuale utente
AEG
AEG GS 500 E Manuale utente
