AeroComm ConnexModem Manuale utente
ConnexModem & ConnexPC
User’s Manual
Version 1.0
Document Information
6/3/2002 2
Copyright
Information
Copyright © 2001A
ERO
C
OMM
, Inc. All rights reserved.
The information contained in this manual and the accompanying
software programs are copyrighted and all rights are reserved by
AEROCOMM, Inc. AEROCOMM, Inc. reserves the right to make
periodic modifications of this product without obligation to notify
any person or entity of such revision. Copying, duplicating, selling, or otherwise
distributing any part of this product without the prior consent of an authorized
representative of AEROCOMM, Inc. is prohibited.
All brands and product names in this publication are registered
trademarks or trademarks of their respective holders.
This material is preliminary
Information furnished by AEROCOMM
in this specification is believed to be accurate. Devices sold
by AEROCOMM are covered by the warranty and patent indemnification provisions appearing in its
Terms of Sale only. AEROCOMM makes no warranty, express, statutory, and implied or by
description, regarding the information set forth herein. AEROCOMM reserves the right to change
specifications at any time and without notice.
AEROCOMM’s products are intended for use in normal commercial applications. Applications
requiring extended temperature range or unusual environmental requirements such as military,
medical life-support or life-sustaining equipment are specifically not recommended without
additional testing for such application.
Limited Warranty
For a period of one (1) year from the date of purchase, AEROCOMM warrants the transceiver
against defects in materials and workmanship. AEROCOMM will not honor this warranty (and
this warranty will be automatically void) if there has been any:
(1) Tampering, signs of tampering, or opening the tranceiver’s case.
(2) Use of AC power adapters and cables other than those originally supplied with the
transceivers.
(3) Repair or attempt to repair by anyone other than an AEROCOMM authorized
technician.
This warranty does not cover and AEROCOMM will not be liable for, any damage or failure
caused by misuse, abuse, acts of God, accidents, electrical irregularity, or other causes
beyond AEROCOMM's control, or claim by other than the original purchaser.
FCC Information
6/3/2002 3
FCC Notice
RF Exposure (For 200mW units only: Part Numbers CM200, CM200A,
CPC200, CPC200A)
WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference and (2) This device must accept any interference received,
including interference that may cause undesired operation.
WARNING: To satisfy FCC RF exposure requirements for mobile and base station
transmitting devices, a separation distance of 32cm or more should be
maintained between the antenna of this device and persons during
operation. To ensure compliance, operations at closer than this distance is
not recommended.
The preceding statement must be included as a CAUTION statement in
manuals for OEM products to alert users on FCC RF Exposure compliance.
Table of Contents
6/3/2002 4
1. OVERVIEW....................................................................................................................5
1.1 CONNEXMODEM & CONNEXPC DEFINITIONS ................................................................5
2. WINDOWS MODEM SETUP & CONFIGURATION...........................................................5
3. TROUBLESHOOTING....................................................................................................9
ConnexModem & ConnexPC User’s Manual
6/3/2002 5
1. Overview
The ConnexModem and ConnexPC products provide a wireless point-to-point connection
between a RS232 device and a 56K data/fax modem.
1.1 ConnexModem & ConnexPC Definitions
1. Pwr: Red LED indicates power is connected to the unit.
2. Link: Green LED indicates the units are in range of one another.
3. Rx: Red LED indicates a unit is receiving data.
4. Tx: Green LED indicates a unit is sending data.
5. Dual RJ11 Jack: There are 2 standard telephone jacks on the ConnexModem unit. The
phone line can be connected to either jack. The other jack can be connected to a
telephone.
2. Windows Modem Setup & Configuration
When connecting the ConnexPC to a computer running Windows 95, 98, Me, 2000, or NT, the
correct modem driver must be installed and properly configured. Please follow the steps and
diagrams below to complete the setup and configuration.
1. Double-click on My Computer on the desktop, double-click on Control Panel, double-
click Modemsto display the Modems Propertieswindow.
ConnexModem & ConnexPC User’s Manual
6/3/2002 6
2. If the Standard 56000 bps K56Flex Modem is not installed, click Add… to install a new
modem.
3. Select Other when asked what type of modem you want to install, then click on Next>.
4. Select “Don’t detect my modem; I will select it from a list”. Then select Next>.
ConnexModem & ConnexPC User’s Manual
6/3/2002 7
5. Select “(Standard Modem Types)” from the Manufacturers list, then select “Standard
56000 bps K56Flex Modem” from the Models list. Click Next> to continue.
6. Select the port to use with the modem and click Next> to continue.
7. Wait while Windows installs the modem. Click Finish to complete the installation of the
new modem and to return to the Modems Propertieswindow.
ConnexModem & ConnexPC User’s Manual
6/3/2002 8
8. You are now ready to configure the new modem. Select “Standard 56000 bps K56Flex
Modem” and then click Properties.
9. On the General tab, select the port that is connected to the ConnexPC unit. Select
115200 for the Maximum speed. Do not select “Only connect at this speed”, as this
will not allow communications from the ConnexPC unit to the ConnexModem unit.
10. Click the Connection tab. Select 8Data bits, None for Parity, 1for Stop bits. Select
“Wait for dial tone before dialing”. Selecting “Cancel the call if not connected
within xx secs” is optional.
ConnexModem & ConnexPC User’s Manual
6/3/2002 9
11. Click Advanced… to continue. Select “Use flow control” and then select “Hardware
(RTS/CTS)”. Click OK to return to the Standard 56000 bps K56Flex Modem
Propertieswindow. Click OK to return to the Modems Propertieswindow. Click Close
to complete the configuration.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali AeroComm Modem
