AEROMAT NH35 Manuale utente
Thank you for purchasing this AEROMAT watch. The following
instructions are provided to help familiarize yourself with
the
proper operation and care of your AEROMAT watch. To
ensure correct use, please read and follow the instructions
carefully.
01
02
CONTENT
P3
P4
P5
P6
P7
P8
P9-10
P11-12
P13
P14
P15-16
AUTOMATIC
NH35 - Type B
NH37 - Beluga
- Beluga - Function
9015 - Super Sonic
- Super Sonic - Function
8215 - Type A
QUARTZ
VK63 - Vol de Nuit
VK64 - PNY
763 - AEM450
515.24H - Type GMT
PRECAUTIONS AND PREVENTIVE MEASURES
03
AUTOMATIC - NH35
WIND UP THE MAINSPRING
SETTING THE DATE
SETTING THE TIME
Push the crown back to the position.
Pull the crown out to the position.
Normal position
1.
2.
3.
4.
Crown may need to be unscrewed
prior to operation.
Turn the crown to set hour and
minute hands
Pull the crown out to the position.
Push the crown back to the position.
Normal position
1.
2.
3.
4.
Turn the crown counter-clockwise
to set the date
Do not set the date between
9:00PM and 4:00AM as this
may cause a malfunction.
Normal position1.
2. Turn the crown clockwise to wind
up the mainspring
Wind by turning the crown clockwise
8 times. It will start to move naturally
after shaking slightly.
To wind up with winding machine.
Full wind up conditions:
Rotary speed: 30rpm
Operating time: 60rpm
04
AUTOMATIC - NH37
WIND UP THE MAINSPRING
SETTING THE DATE
SETTING THE TIME
Normal position1.
2.
3.
4.
Turn the crown to set hour and
minute hands
Crown may need to be unscrewed
prior to operation.
Push the crown back to the position.
Pull the crown out to the position.
Normal position1.
2.
3.
4.
Turn the crown counter-clockwise
to set the date
Do not set the date between
9:00PM and 4:00AM as this
may cause a malfunction.
Pull the crown out to the position.
Push the crown back to the position.
Normal position1.
2. Turn the crown clockwise to wind
up the mainspring
Wind by turning the crown clockwise
8 times. It will start to move naturally
after shaking slightly.
To wind up with winding machine.
Full wind up conditions:
Rotary speed: 30rpm
Operating time: 60rpm
Some models will remove the date function.
05
BELUGA - FUNCTION
HOW TO TURN THE COUNTDOWN BEZEL
The countdown bezel can determine the remaining time.
1. Turn the bezel and align the bezel’s zero position with
the targeted time.
06
AUTOMATIC - 9015
WIND UP THE MAINSPRING
SETTING THE DATE
SETTING THE TIME
Normal position1.
2. Turn the crown clockwise to wind
up the mainspring
Wind 15 ~20 times clockwise until
second hand starts to move naturally.
Normal position1.
2.
3.
4.
Turn the crown counter-clockwise
to set the date
Do not set the date between
8:30PM and 2:00AM as this
may cause a malfunction.
Pull the crown out to the position.
Push the crown back to the position.
Normal position1.
2.
3.
4.
Turn the crown to set hour and
minute hands
Crown may need to be unscrewed
prior to operation.
Push the crown back to the position.
Pull the crown out to the position.
07
SUPER SONIC - FUNCTION
HOW TO TURN THE INNER RING
1. Turn the 2H crown clockwise or counter-clockwise
to set the inner ring
08
AUTOMATIC - 8215
WIND UP THE MAINSPRING
SETTING THE DATE
SETTING THE TIME
Normal position1.
2. Turn the crown clockwise to wind
up the mainspring
Wind 15 ~20 times clockwise until
second hand starts to move naturally.
Normal position1.
2.
3.
4.
Turn the crown counter-clockwise
to set the date
Pull the crown out to the position.
Push the crown back to the position.
Normal position1.
2.
3.
4.
Turn the crown to set hour and
minute hands
Crown may need to be unscrewed
prior to operation.
Push the crown back to the position.
Pull the crown out to the position.
09
QUARTZ - VK63
SETTING THE DATE
Normal position1.
2.
3.
4.
Do not set the date between 9:00PM
and 3:00AM; otherwise the date may
not change properly. If it is necessary
to set the date during that period,
first change the time to any time
outside it, set the date, and then
reset the correct time.
Turn the crown counter-clockwise to
set the date
Pull the crown out to the position.
Push the crown back to the position.
Normal position1.
2.
3.
4.
If the crown is pulled to the second position
while the chronograph has started, the
chronograph hands will continue to move.
This is not a malfunction.
Turn the crown to set hour and
minute hands
(Check that AM / PM is set correctly)
Crown may need to be unscrewed prior to
operation.
Push the crown back to the position.
Pull the crown out to the position.
SETTING THE TIME
Altri manuali per NH35
1
Questo manuale è adatto per i seguenti modelli
7
Altri manuali AEROMAT Orologio
