How to Use Magnetic Holder (Pic1)
1. Put the magnetic plate into the phone
case and check the strength of the magnet
before attaching the 3M tape. (Pic1)
2. Peel off the protection sheet from the 3M
double sided tape and stick the plate to the
phone case.
Caution
If the phone case is too thick, the magnetic
plate can alternatively be placed on
outside of the case with the provided 3M
tape.
When removing your device from the
magnetic holder, twist and slide, rather than
pulling off directly. This will help with
retaining adhesion of the base due to the
extreme strength of the magnets.
