Aeware in.k600 Manuale utente
in.k600™
series of full-function keypads
with streamlined interfaces
TechBook
Giving full control to wet fingers!
1
in.k600™
Table of contents
overview ......................................................................................... 3
warning ...........................................................................................4
function description ......................................................................5
icon description ............................................................................. 7
installation
- low profile .......................................................................10
- drilling templates ............................................................11
connections ...................................................................................12
functions ........................................................................................13
specifications ............................................................................... 18
table of contents
3
in.k600™ overview
in.k600™
Advance series of full-function keypads that
gives complete control to wet fingers!
With its stunning design, Aeware’s® in.k600™ series of advanced
keypads are in.xm’s™ ultimate user interface. They feature a low
profile with a large LCD displays, streamlined interfaces that let
users easily control all in.xm™ functions and programming directly
from spa side, creating a true and unique Aeware® user experience
directly from spa side.
4
in.k600™warning
WARNINGS:
Before installing or connecting the unit,
please read the following.
FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS MAY
SIGNIFICANTLY SHORTEN THE PRODUCT’S LIFE TIME, AND
LEAD TO FAILURES AS WELL AS HAZARDOUS CONDITIONS*.
COMMON SENSE MUST ALWAYS PREVAIL WHEN EVALUATING
THE INSTALLATION AND/OR USE OF ANY ELECTRONIC
CONTROL IN A FINAL APPLICATION.
• The maximum ambient conditions this PRODUCT is subjected
to (temperature, humidity, etc.) are not to be exceeded.
• This PRODUCT must be installed by qualified personnel.
• Only qualified personnel are to service this PRODUCT.
There are no user serviceable parts inside.
• This PRODUCT is only compatible with Aeware’s® in.pac™ line
of products.
• This PRODUCT should be installed on a clean flat surface.
• The gasket on the back of the unit will prevent water infiltration
inside, behind the mounted surface. If the gasket is damaged,
the user must seal the back of the unit with silicone to avoid any
leakage behind the mounted surface.
* HAZARDOUS CONDITION:
A condition that is potentially damaging and/or dangerous to
its operator or surroundings. This includes, but is not limited
to: fire, flooding or other water damage, dielectric breakdowns
(presence of high voltage), etc.
5
in.k600™ function description
"Ok" Key
"On/Off" Key
"Program" Key
"Minus" Key
"Light" Key
"Right" Key
"Plus" Key
"Left" Key
"Economy
Mode" Key
"Pump" Keys
6
in.k600™
"Ok" Key
"On/Off" Key
"Program" Key
"Minus" Key
"Pump"/
"Right" Key
"Plus" Key
"Pump"/
"Left" Key
function description
"Light" Key
"Pump" Keys
7
in.k600™
Heating icon Economy
mode icon Smart winter
mode icon
Program icon
Service icon
Filtering icon
Pump icons Blower icon
Light icon
Progress bar icon
AM/PM (˚F/ ˚C)
Time, temperature
& message digits
icon description
Set point icon
8
in.k600™icon description
Icon Description
Light icon
The "Light" icon lights up when the light is on. The icon's number of rays is proportional to
the light's intensity.
Pumps icons
The "Pump" indicator numbers light up and their icons become fast animated when pumps
are in high speed, slower animated icons when pumps are in low speed.
Blower icon
The "Blower" indicator icon become animated when blower is on.
Service icon
A problem has been detected. Do not enter the water! Spa service is required.
Smart winter mode icon
The "SWM" icon automatically turns on when freeze protection is active.
It flashes while system purges the spa plumbing.
Economy mode icon
The "Economy" icon lights up when filter cycle is on
Filter Cycle icon
The "Filter Cycle" icon lights up when filter cycle is on. It flashes when filtering is suspended.
9
in.k600™
Icon description
Heater icon
The "Heater" icon lights up when the heater is on.
Progress bar
A visual indication of the time remaining before an equipment is turned off or before the
end of the standby mode.
Set Point icon
The "Set Point" icon automatically turns on when set point setting menu is activated.
(SP message on display). It flashes when:
1- there is a call for heat and heater has not started yet,
2- heater has just turned off and element is cooling down or
3 - if system is performing a check flow.
Program icon
The "Program" icon lights up when Programming.
icon description
10
in.k600™
Gasket with or without
adhesive
To install the in.k600™ low profile, use the drilling template
provided in this section. Determine the mounting location and
stick the template on chosen location. The user must cut out a
rectangular shape opening of 7.250" by 3.750" according to the
template (see illustration).
Clean the installation surface and peel the adhesive gasket from the
back of the keypad.
Insert keypad and align it correctly, then ensure it's properly glued
by gently pressing evenly on the entire surface.
Installation in.k600™ low profile
Optional
wing nuts and
spacers
installation
7.250"
3.750"
Altri manuali per in.k600
1
Indice
