AFI Branding ReFrame RC051 Manuale utente
www.afibranding.com.au | 1300 652 514 |33 Lakewood Blvd, Carrum Downs, Vic, 3201
ReFrame® Lengths
Allen Key
Brackets
12x
24x
1x
1
CHECKLIST
1
RC051 - double-sided cube ReFrame®
assembly instructions
Lay out the ReFrame®
components on a flat
surface and ensure you have
everything required before
you start the assembly.
Bridge the two parallel bottom frame lengths to make a
square base
3
2
Repeat step 2 on the remaining 3 corners of the bottom
frame lengths 4
Insert corner bracket into frame length (ensuring the bracket is set in as far as possible)
5Ensure each corner is fixed with 2 vertical facing
brackets
Lower vertical lengths onto vertical facing brackets
6
Ensure vertical frames are correctly
in place
Repeat step 2, 3 and 4 to make the
top frame
Connect top frame to vertical
lengths
7 8 9
Using the provided allen key, fix the corner brackets Repeat step 8 on all remaining brackets to complete
frame
10 11
RC051 - double-sided cube ReFrame®
assembly instructions
www.afibranding.com.au | 1300 652 514 |33 Lakewood Blvd, Carrum Downs, Vic, 3201
Applying your custom ReFrame® fabric skin
12
Developed by AFI Branding
Now that you’ve finished assembling your ReFrame®, it’s time to apply your custom ReFrame® fabric skin. Please refer to
either a printed ‘ReFrame® Fabric Installation Guide’ or go to www.reframe.com.au to watch one of our instructional
assembly videos to see how to correctly apply your ReFrame® fabric skin.
NOTE: The assembly instructions for the RC051 (and included components) illustrate the fundamental steps to assemble a
‘standard’ Double-Sided Cube type ReFrame®. If your Reframe® is oversize, has additional components such as joiners (not
shown on this fact sheet), accessories, or has bends/curves and you are unsure how to proceed with assembly, please contact
the team at AFI Branding on 1300 652 514 and we will guide you through the assembly process.
Indice
Altri manuali AFI Branding Rack e supporto
