AFL Hyperscale 1024f L3 Mustang Manuale utente

1024f L3 Mustang Splitter Backboard

Installation Guide

1024f L3

Mustang

Conguration SKU Code

1024HP 10014861

Safety Precautions

Laser Precautions

Warning: The laser light used to transmit information over optical ber cables can cause severe eye

damage. Because this light is invisible, it will not cause the iris of the eye to contract involuntarily as when

viewing a bright visible light, and no pain is felt as the retina is burned.

Never look into the end of a ber or connector which may have a laser coupled to it. Should accidental

eye exposure to laser light be suspected, arrange for an eye examination immediately.

General Precautions

Personnel must be thoroughly familiarized with all applicable Occupational Health and Safety (OH&S)

regulations, local regulations, and your company safety practices and policies.

Warning: To reduce the chance of accidental injury:

Before work begins, all personnel must be thoroughly familiar with the operation of all equipment

and procedures to be used during the installation.

Before use, all equipment, especially safety gear, must be inspected and tested for proper operation.

Replace and repair as necessary.

1024f L3 Mustang Backboard

Before installing or adjusting this product, please read these instructions carefully.

Please keep this guide for future reference.

1024f L3 Mustang Backboard

Component Overview

1. Backboard

2. Modular Raceway

3. Loop Raceway

4. Splice tray

5. 2x 1:2 Splitter and Splitter Tray

6. 1:8 Splitter Tray

7. Cable / Tube Manifold

8. Single Duct Tie Point

9. Universal Duct Tie Point

10. Installation Guide / QR Code

In the Box

Item

No Item Qty

01 Backboard 1

02 Modular Raceway 12

03 Loop Raceway 2

04 Splice Tray 4

05 2x Splitter and Splice Tray 8

06 1x8 Splitter Tray 32

07 Cable / Tube Manifold 2

08 Single Duct Tie Point 2

09 Universal Duct Tie Point 6

10 Installation Guide QR Code 1

(01) Backboard

(04) Splice Tray

Cable Ties

(07) Cable / Tube Manifold

Splice Protectors

(02) Modular Raceway

(05) 2x Splitter and Splice

Tray

Tube Cutter

(08) Single Duct Tie Point

Scissors Marker Pen

(03) Loop Raceway

(06) 1x8 Splitter Tray

(09) Universal Duct Tie

Point

(10) Installation Guide QR

Code

What You Will Need Related Products

FCP2 Fiber Cleaning Kit for SC/ST/FC/LC

1024f L3 Mustang Backboard

Backboard Installation

Slot studs into back panel – no tools required.

Backboard must be central, top, location as shown.

Rear Section View

Cable Routing

Overall Routing

1:8 Splitter Inputs

(routed to 2 x 1:2 tray)

1:2 Splitter Inputs

(routed to splice tray) L4 distribution ber

Network ber

from L2.5

Tray 24

Tray 1

1024f L3 Mustang Backboard

Tray Map

L3 Mustang 1024HP

Tray map for splicing – Match the splitter letter to input tail letter

LHS Stack

Tray

Position Tray Type Input

Tails Splitters Output

Tails

24 1x8 Splitter Tray N

23 1x8 Splitter Tray M

22 1x8 Splitter Tray L

21 1x8 Splitter Tray K

20 1x8 Splitter Tray J

19 1x8 Splitter Tray I

18 1x8 Splitter Tray H

17 1x8 Splitter Tray G

16 1x8 Splitter Tray F

15 1x8 Splitter Tray E

14 1x8 Splitter Tray D

13 1x8 Splitter Tray C

12 1x8 Splitter Tray B

11 1x8 Splitter Tray A Splitter

Letter

10 2x1:2 Splitter

Tray

Splitter 2 Tail 2 FF

Tail 1 EE

Splitter 1 Tail 2 DD

Tail 1 CC

92x1:2 Splitter

Tray

Splitter 2 Tail 2 BB

Tail 1 AA

Splitter 1 Tail 2 Z

Tail 1 Y

82x1:2 Splitter

Tray

Splitter 2 Tail 2 X

Tail 1 W

Splitter 1 Tail 2 V

Tail 1 U

72x1:2 Splitter

Tray

Splitter 2 Tail 2 T

Tail 1 S

Splitter 1 Tail 2 R

Tail 1 Q

62x1:2 Splitter

Tray

Splitter 2 Tail 2 P

Tail 1 O

Splitter 1 Tail 2 N

Tail 1 M

52x1:2 Splitter

Tray

Splitter 2 Tail 2 L

Tail 1 K

Splitter 1 Tail 2 J

Tail 1 I

42x1:2 Splitter

Tray

Splitter 2 Tail 2 H

Tail 1 G

Splitter 1 Tail 2 F

Tail 1 E

32x1:2 Splitter

Tray

Splitter 2 Tail 2 D

Tail 1 C

Splitter 1 Tail 2 B

Tail 1 A

2 Splice Tray - -

1 Splice Tray - -

RHS Stack

Tray

Position Tray Type Input

Tails Splitters Output

Tails

24 - - - -

23 - - - -

22 - - - -

21 - - - -

20 1x8 Splitter Tray FF

19 1x8 Splitter Tray EE

18 1x8 Splitter Tray DD

17 1x8 Splitter Tray CC

16 1x8 Splitter Tray BB

15 1x8 Splitter Tray AA

14 1x8 Splitter Tray Z

13 1x8 Splitter Tray Y

12 1x8 Splitter Tray X

11 1x8 Splitter Tray W

10 1x8 Splitter Tray V

9 1x8 Splitter Tray U

8 1x8 Splitter Tray T

7 1x8 Splitter Tray S

6 1x8 Splitter Tray R

5 1x8 Splitter Tray Q

4 1x8 Splitter Tray P

3 1x8 Splitter Tray O

2 Splice Tray

1 Splice Tray

1:2 Routing

Route 1:2 splitter inputs down to network splice tray. 1:2 splitter outputs splice to 1:8.

1:8 Splitter Inputs

(routed to 1:8 tray)

1:2 Splitter Inputs

(routed to splice tray)

1:2 Splitter Outputs

1x2 G.657A2 splitter

Splice protectors

Splitter 2

Splitter 1

1024f L3 Mustang Backboard

Splice 1:2 Inputs to network ber.

1:2 Input Splicing

1:2 Splitter Inputs

(routed to splice tray)

Network ber

from L2.5

Splice protectors

Splice 1:8 Outputs to L4 distribution ber

1:2 Output to 1:8 Input & 1:8 Output Splicing

1:8 Splitter

Inputs

L4 distribution

ber

1:8 Splitter

outputs

(250µm)

Splice

protectors

1:8 Splitter

Outputs (250µm)

1x8 G.657A2

splitter

Indice

Altri manuali AFL Hyperscale Hardware per computer