9
Customizing your Monitor
The On Screen Display (OSD) system provides a full range of customizable tools to
optimize your display.
Important: While full customization is available, we strongly recommend using
the AUTO settings, which are preset to fully optimize your monitor’s
performance. Simply presses the AUTO button exceed 1 second to
engage the AUTO settings. It is also recommended that you execute
the AUTO function following any change made to your display from
your computer.
Working with OSD Groups
Press any of the LEFT , or RIGHT buttons to open the OSD window.
OSD Function Menu
To access OSD Main menu, simply press
one of the Function Select control buttons,
and the menu diagram will pop up on the
screen as shown on Fig. 1-1:
Continue pressing the Function Select
buttons (left/right) to scroll through the
entire menu items ,then press Adjustment
Control buttons (up/down) to adjust content
of selected item.
Attention Firmware revision may have been updated into a latest version
while the version number shown on all OSD menus in this manual
will stay as Ver. 1.00.
Brightness & Contrast ( / )
• To fine-tune the monitor’s brightness and contrast, select the pertinent item from
the menu.
• Use the UP and DOWN buttons to set the display as desired on the 0-100
scales that appears at the bottom of the window.
Horizontal & Vertical Position ( / )
• To fine-tune the display’s position on the monitor screen, select the pertinent item
from the menu.
• Use the UP and DOWN buttons to set the display as desired on the 0-100
scales that appears at the bottom of the window.
Phase & Clock ( / )
• To fine tune picture performance to compensate for drifts in the computer signal,
select the pertinent item from the menu.
• Use the UP and DOWN buttons to set the display as desired that appears
at the bottom of the window.
