Agilent Technologies E8041A Interposer Manuale operativo e di manutenzione

Agilent Technologies

E8041A Interposer for the Intel® Pentium® 4

Processor in the 478-Pin Package

Interposer Installation

Quick Start

2 E8041A Interposer Quick Start

Protecting the Interposer

Here is a summary of precautions to take to avoid damaging the interposer:

DO minimize the removal of the analysis probe cables, once they are connected

to the interposer.

DO minimize the removal of the interposer, once it is connected to the

microprocessor and target system.

DO exercise patience and care when working with the interposer.

DO use ESD precautions.

DO remove power from the target system and analysis probe before making

attachments.

DO protect the pins from damage by covering them with the pin protector when

the interposer is not in use.

DO NOT insert any kind of tool between the interposer and the microprocessor,

except as described in this manual.

DO NOT kink the analysis probe cables.

DO NOT pull on or twist the "wings" of the interposer.

E8041A Interposer Quick Start 3

1Remove the heatsink from the microprocessor.

2Remove the microprocessor from the target system.

3Remove the Intel retention module from the target

system.

4Install the Agilent retention modules.

4 E8041A Interposer Quick Start

5Check that the socket on the target system is still

open.

6Remove the pin protector from the interposer.

Keep the pin protector. You will need it to prevent damage to the interposer

whenever the interposer is not plugged into the target system.

E8041A Interposer Quick Start 5

7Align the interposer over the socket on the target

system.

Note how the socket on the interposer is rotated 80° relative to the socket on

the target system. This is done so that the interposer will not interfere with

the target socket’s actuation mechanism.

The wings of the interposer will flex around the retention modules.

8Gently wiggle the interposer until you feel the pins

fall into the holes of the socket.

9Visually check that the bottom of the interposer is

flush with the top of the socket on the target

system.

6 E8041A Interposer Quick Start

10 With one hand, apply light downward pressure on

the interposer. With the other hand, close the the

socket.

11 Align the processor over the socket on the

interposer.

12 Gently wiggle the assembly until you feel the pins

fall into the holes. Visually check that the bottom of

the processor module is flush with the top of the

socket on the interposer.

CAUTION

The processor should be oriented the same way that it was originally oriented

on the target system. Note that the orientation of the processor with respect to

the lever on the socket is opposite from the target system. The socket is keyed,

so the processor will only go in the right way.

E8041A Interposer Quick Start 7

13 Apply light downward pressure on the processor

while you close the interposer socket.

14 Re-install the heatsink.

8 E8041A Interposer Quick Start

15 Install the clip assembly to hold the heatsink in

place.

Use the clip assembly which you removed earlier.

E8041A Interposer Quick Start 9

16 Connect the analysis probe cables to the interposer.

Refer to the silkscreened labels on the interposer and on the cable paddles.

Install the supplied clips to keep the paddles on the end of the analysis probe

cables from pulling apart.

17 Connect the analysis probe to the logic analyzer.

Connect the pod cables to the connectors on the analysis probe as shown on

the back of the analysis probe.

10 E8041A Interposer Quick Start

Altri manuali Agilent Technologies Hardware per computer

Agilent Technologies

Agilent Technologies 6050A Manuale utente

Agilent Technologies

Agilent Technologies C-Size VXIbus Systems Manuale utente

Agilent Technologies

Agilent Technologies E8364-60105 Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies N4880A Manuale utente

Agilent Technologies

Agilent Technologies 66000A Manuale utente

Agilent Technologies

Agilent Technologies HP 82341 Manuale utente

Agilent Technologies

Agilent Technologies HSSI WanProbe J3916A Manuale operativo

Agilent Technologies

Agilent Technologies N5171B Manuale di installazione

Agilent Technologies

Agilent Technologies E1300B Manuale utente

Agilent Technologies

Agilent Technologies E8402A Guida alla risoluzione dei problemi

Agilent Technologies

Agilent Technologies G3588-68015 Manuale utente

Agilent Technologies

Agilent Technologies E1406A Manuale del proprietario

Agilent Technologies

Agilent Technologies E5900B Manuale utente

Agilent Technologies

Agilent Technologies VXI 75000 Series Guida alla risoluzione dei problemi

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente