Agilent Technologies 16522A Manuale utente

User’s Guide

Publication number 16522-97007

June 2000

For Safety information, Warranties, and Regulatory

information, see the pages behind the Index

Copyright Agilent Technologies 1987, 1995, 1996, 1997, 1999, 2000

Agilent Technologies 16522A

200-M Vectors/s

Pattern Generator

The Agilent Technologies 16522A

Pattern Generator

The Agilent Technologies 16522A pattern generator module is an

expandable stimulus tool designed for the Agilent Technologies

16500B/C Logic Analysis System. It provides digital design teams the

ability to emulate missing devices and to functionally test prototypes.

Key Characteristics

Output channels: 20 channels at 200 MHz clock; 40 channels at 100

MHz clock.

Memory depth: 258,048 vectors.

Logic levels (data pods): TTL, 3-state TTL/3.3v, 3-state TTL/CMOS,

ECL terminated, ECL unterminated, and differential ECL (without pod).

Data inputs: 3-bit pattern - level sensing (clock pod).

Clock outputs: Synchronized to output data, delay of 11 ns in

9 steps (clock pod).

Clock input: DC to 200 MHz (clock pod).

Internal clock period: Programmable from 5 ns to 250 µs in a 1, 2, 2.5,

4, 5, 8 sequence.

External clock period (user supplied): DC to 200 MHz.

External clock duty cycle: 2 ns minimum high time.

Maximum number of "IF condition" blocks at 50 MHz clock: 1.

Maximum number of different macros: 100.

Maximum number of lines in a macro: 1024.

Maximum number of macro invocations: 1,000.

Maximum number of Repeat loop invocations: 1,000.

Maximum number of Wait event patterns: 4.

Agilent Technologies 16522A Pattern Generator

iii

In This Book

This User’s Guide contains all the

information needed to operate, program,

and service the Agilent Technologies

16522A Pattern Generator module.

Chapter 1 documents many common tasks

that you will perform while using the

pattern generator. Use this chapter as a

quick reference to the product’s operation.

Chapter 2 contains reference information

on the functionality of the menu fields and

product features. Use this chapter for

additional information on feature usage

and limitations.

Chapter 3 documents the programming command set used when controlling

the pattern generator from a computer. Use this chapter for command

reference information when writing your test verification programs.

Chapter 4 contains service procedures for verifying the product’s

performance, board-level troubleshooting, and replacement of the PC board

and cables. Use this chapter if you suspect problems with the pattern

generator.

Chapter 5 contains information on the installation of the pattern generator

module and probe tip assemblies. Use this chapter to configure and install

single and multi-card modules.

Chapter 6 documents how to load user-created pattern generator files as

ASCII files into the pattern generator. Use ASCII file downloading if you

want to create and load files by one of the remote communications interfaces

or load by disk.

Using the Agilent 16522A

Agilent 16522A Reference

Programming the Agilent 16522A

Servicing the Agilent 16522A

Installation

Loading ASCII Files

Index

Contents

1 Using the Agilent Technologies 16522A

Setting Up the Proper Configurations 1–3

To set up the configuration 1–3

To build a label 1–5

Building Test Vectors 1–6

To build a main vector sequence 1–7

To build an initialization sequence 1–8

To edit a main or initialization sequence 1–8

To include hardware instructions in a sequence 1–9

To include software instructions in a sequence 1–10

To include a user macro in a sequence 1–11

To build a user macro 1–12

To modify a macro name 1–13

To edit a macro 1–13

To add, delete, or rename parameters 1–14

To place parameters in a vector 1–15

To enter or modify parameters 1–16

To build a User Symbol Table 1–17

To include symbols in a sequence 1–18

To include symbols in a macro 1–19

To store a configuration 1–20

To load a configuration 1–21

To use Autoroll 1–22

2 Agilent 16522A Reference

The Format Menu 2–3

The Sequence Menu 2–6

The User Macros Menu 2–14

Pod Numbering 2–16

Connecting Pods Directly to a PC Board 2–17

Output Pod Characteristics 2–18

Contents–1

3 Programming the Agilent 16522A

Programming Overview 3–3

Example Pattern Generator Program 3–3

Selecting the Module 3–4

Mainframe Commands 3–5

Command Set Organization 3–8

Module Status Reporting 3–10

Module Level Commands 3–13

STEP 3–14

RESume 3–16

FORMat Subsystem 3–17

CLOCk 3–18

DELay 3–19

LABel 3–20

MODe 3–22

REMove 3–23

SEQuence Subsystem 3–24

COLumn 3–26

EPATtern 3–27

INSert 3–29

PROGram 3–32

REMove 3–35

MACRo Subsystem 3–36

INSert 3–39

NAME 3–42

PARameter 3–43

PROGram 3–44

REMove 3–47

Contents

Contents–2

SYMBol Subsystem 3–48

BASE 3–50

PATTern 3–51

RANGe 3–52

REMove 3–53

WIDTh 3–54

Data and Setup Commands 3–55

SYSTem:DATA 3–57

SYSTem:SETup 3–58

4 Servicing the Agilent 16522A

Servicing the Agilent 16522A 4–2

Testing the Agilent 16522A 4–7

To run self-tests 4–8

To run performance verification tests 4–9

To verify pattern output 4–11

To exit the test system 4–13

Self-Tests Descriptions 4–14

Clock Source Test 4–14

Vector Memory Test 4–15

Address Counter Test 4–16

Instruction Tests 4–17

Output Patterns for testing with an external logic analyzer

or oscilloscope 4–20

Theory of Operation 4–21

To replace the board and cable 4–23

Agilent 16522A Replacement Parts 4–24

To clean the pattern generator module 4–26

Contents

Contents–3

5 Installation

To inspect the module 5–3

To prepare the mainframe 5–3

To configure a one-card module 5–5

To configure a multi-card module 5–6

To install modules 5–10

6 Loading ASCII files

ASCII file commands 6–3

ASCDown Command 6–3

LABel 6–4

VECTor 6–5

FORMat:xxx 6–7

Loading an ASCII file over a bus (example) 6–8

Loading an ASCII file from a disk (example) 6–11

Index

Contents

Contents–4

Indice

Altri manuali Agilent Technologies Invertitore

Agilent Technologies

Agilent Technologies 33120A Manuale utente

Agilent Technologies

Agilent Technologies E4400-60230 g Guida rapida

Agilent Technologies

Agilent Technologies 33120A Manuale utente

Agilent Technologies

Agilent Technologies MXG (Series A and B) Manuale utente

Agilent Technologies

Agilent Technologies Agilent 33500 Series Manuale di servizio

Agilent Technologies

Agilent Technologies 83620B Manuale utente

Agilent Technologies

Agilent Technologies 8960 Manuale utente

Agilent Technologies

Agilent Technologies E8247C PSG CW Manuale utente

Agilent Technologies

Agilent Technologies E4428C Manuale utente

Agilent Technologies

Agilent Technologies E4438C Manuale utente

Agilent Technologies

Agilent Technologies U9391C Manuale di servizio

Agilent Technologies

Agilent Technologies N4970A Manuale utente

Agilent Technologies

Agilent Technologies PSG Series Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies E4412A Manuale di servizio

Agilent Technologies

Agilent Technologies E4438C ESG Manuale utente

Agilent Technologies

Agilent Technologies E8257D PSG Manuale utente

Agilent Technologies

Agilent Technologies 33120A Manuale utente

Agilent Technologies

Agilent Technologies E4400B Manuale utente

Agilent Technologies

Agilent Technologies 33250A Manuale utente

Agilent Technologies

Agilent Technologies E8257D/67D Manuale utente

Agilent Technologies

Agilent Technologies n5181a Istruzioni operative

Agilent Technologies

Agilent Technologies 205AG Manuale di servizio

Agilent Technologies

Agilent Technologies AGILENT U2761A Manuale utente

Agilent Technologies

Agilent Technologies 346A Manuale di servizio

Manuali Invertitore popolari di altre marche

Fourgroup

Fourgroup Easy Manuale utente

Velleman

Velleman PI300M Manuale utente

Sungrow

Sungrow SG350HX-US Manuale utente

WilTec

WilTec 61897 Manuale utente

SMA

SMA SUNNY BOY STORAGE 2.5 Manuale utente

Simplicity

Simplicity LANDLORD 316 Manuale utente

Santak

Santak SMAX 3000 Manuale utente

ATON

ATON RA.Store-3 Manuale utente

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuale utente

Tektronix

Tektronix CFG250 Manuale utente

Champion

Champion 200989 Manuale utente

Vanner

Vanner 20-500 Series Manuale utente

GE GEP Manuale utente

Astrel Group

Astrel Group Power Reducer Guida rapida

MULTIQUIP

MULTIQUIP GDP-5H Guida

GoWISE

GoWISE PS1007 Manuale utente

Promate

Promate PM13500D ES Manuale utente

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuale utente