AGKNX 25-005 Manuale utente
QUICK HITCH
PART # 25-005, CAT 1 QUICK HITCH
PART # 25-010, CAT 2 QUICK HITCH
PART # 25-019, CAT 2HD QUICK HITCH
PART # 25-020, CAT 3 QUICK HITCH
PART # 25-021, CAT 3 NARROW QUICK HITCH
PART # 25-022, CAT 2/3 QUICK HITCH
Operation Manual
This safety alert symbol identies important safety
messages in this manual. Failure to follow this important
safety information may result in serious injury or death.
29-001
Intended Use ......................................................................4
Personal Protective Equipment..........................................4
General Safety....................................................................5
Assembly Instructions ........................................................6
Operation Instructions........................................................8
Removal Instructions........................................................10
Maintenance.....................................................................11
Parts List CAT 1 Quick Hitch............................................12
Parts List CAT 2, 2HD, 3, 3N, 2/3 Quick Hitch .................13
Warranty & Specications ................................................14
Registration ......................................................................15
TABLE OF CONTENTS
IMPORTANT SAFETY INFORMATION
PAGE 4
WARNING:
Read and thoroughly understand all instructions and safety information before assembling or
operating this quick hitch. Failure to do so may cause serious injury or death. Do not allow anyone
to operate this quick hitch who has not read this manual. A quick hitch can be dangerous if
assembled or used improperly. Do not operate if you have doubts or questions concerning safe
operation.
you have any questions or concerns about the safe operation of this equipment.
INTENDED USE
The quick hitch is intended to speed the attachment of 3-point implements to a tractor.
Do not use the quick hitch for any purpose other than connecting a 3-point implement to a tractor.
PERSONAL PROTECTIVE EQUIPMENT:
When operating this quick hitch it is essential that you wear safety gear including steel toe shoes
and tight tting gloves (no loose cus or draw strings).
IMPORTANT SAFETY INFORMATION
PAGE 5
GENERAL SAFETY
Failure to follow warnings, cautions, assembly and operation instructions in the Operation
Manual may result in serious injury or death.
Read the Operation Manual before operation.
●Do not permit children to operate this equipment at any time. Do not permit others that have
not read and understood the complete Operation Manual to operate this equipment.
●Keep all people and pets a minimum of 10 feet away from the area where you connect the
implement to the quick hitch.
●Do not operate the quick hitch when under the inuence of alcohol, drugs or medication.
●Do not allow a person who is tired or otherwise impaired or not completely alert to operate
the quick hitch.
●Read the Tractor's operation manual concerning the proper attachment and how to safely
use a 3-point quick hitch.
ALWAYS OPERATE THIS QUICK HITCH FROM THE TRACTOR SEAT.
DO NOT ATTACH THE QUICK HITCH TO THE TRACTOR WITH THE ENGINE RUNNING.
DO NOT OPERATE THE QUICK HITCH WITH ANYONE IN CONTACT WITH ANY PART OF THE
IMPLEMENT, PTO DRIVELINE OR MOVING PARTS.
SERIOUS INJURY CAN RESULT FROM ENTANGLEMENT WITH MOVING PARTS.
●NEVER connect an implement to the quick hitch that does not connect directly to your
tractor without a quick hitch. The implement must be approved for your tractor, check the
tractor's manual for further information. The quick hitch only acts as a faster method of
connecting previously connected implements to your tractor. The Category of the Tractor
must meet the Category of the quick hitch and implement.
The exception is the CAT 2/3 quick hitch that allows a CAT 2 tractor to connect to a CAT 3
implement.
●Always make sure that your tractor is capable of operating the implement.
ASSEMBLY INSTRUCTIONS
PAGE 6
STEP 1:
Lower the tractor lift arms. Place the tractor lift arms within the slot of the quick hitch and align the
holes. The model CAT 2/3 has two slots to connect the tractor a-arms. The inside slot is for CAT 2
tractors and the outside slot is for CAT 3 tractors.
STEP 3:
Place the tractor top link within the upper slot of the quick hitch and align the holes.
STEP 2:
Connect the a-arm to the quick hitch using the lower a-arm pin BB and lynch pin. CC
INSTRUCTIONS TO ATTACH THE 3-PT OF THE TRACTOR TO THE QUICK HITCH
ASSEMBLY INSTRUCTIONS
PAGE 7
STEP 4:
Connect the top link BB with the top link pin and lynch pin. CC
STEP 1:
Bushings might be required to connect your implement to the quick hitch. Bushings are required if
the diameter of the implements lower hitch pin is smaller than the lower hooks of the quick hitch.
Attach the bushings to the implements lower hitch pins by sliding on the bushing. Secure the
bushing to the implements lower hitch pins with roll pins. A hammer will be needed to force the roll
pin in place.
INSTRUCTIONS TO ATTACH THE IMPLEMENT TO THE QUICK HITCH
OPERATING INSTRUCTIONS
PAGE 8
STEP 2:
Move the tractor to position the quick hitch's lower hooks below the implements bushings or lower
hitch pin. Position the hook of the quick hitch below the mast pin of the implement.
STEP 3:
Raise the a-arms of the tractor to lift the implement. Verify that the bushings or lower hitch pins set
completely within the quick hitch lower hooks and the mast pin captured by the quick hitch upper
hook.
STEP 4:
Connect the driveline from the implement to the tractor if the implement requires. See the tractors
owner's manual for instructions on how to connect a driveline.
EXCEPTIONS:
The CAT 1 quick hitch allows the use of non-standard implements.
If the mast pin or the lower hitch pins of the implement do not set all the way in the hooks
it might be necessary to raise or lower the top hook of the quick hitch. It may require a few
tries to get the hook in the right location.
OPERATING INSTRUCTIONS
PAGE 9
Some Non-standard CAT 1 implements may require the use of the CAT 1 quick hitch adapter.
Follow the below steps to attach the quick hitch to non-standard implements.
STEP 1:
Remove the upper hook by removing the hex bolts and nuts.
STEP 2:
Slide the adapter bracket over the top bracket of the quick hitch and put the top link pin through
both the quick hitch adapter and top link. Either hole of the quick hitch adapter can be used.
STEP 3:
Connect the quick hitch adapter to the mast of the implement.
OPERATING INSTRUCTIONS
PAGE 10
INSTRUCTIONS TO REMOVE THE IMPLEMENT FROM THE QUICK HITCH
STEP 1:
Turn o the tractor and remove the PTO driveline if applicable. See the tractor's owner's manual for
instructions.
Raise the tractor a-arms enough that the implement weight is on the quick hitch hooks.
Flip both quick hitch handles vertical. The handles will stay vertical or in the open position. Flipping
the handles vertical will pull the locking plate inside the quick hitch freeing the implement's lower
pins to be removed.
STEP 2:
Lower the tractor's a-arms until the implements pins or bushings are out of the quick hitch lower
hooks and mast from the quick hitch upper hook.
STEP 3:
Verify that no parts of the implement or driveline are attached to the quick hitch and the tractor is
clear to move forward without the quick hitch hitting any part of the implement.
Drive the tractor forward and then ip the handles back closed in the horizontal position.
Questo manuale è adatto per i seguenti modelli
5
Indice
