AGM EXPLORATOR FSB50-640 Manuale utente

USER MANUAL

EXPLORATOR

FSB50-640

THERMAL FUSION BINOCULAR

This documentation is subject to change without notice.

No parts of this manual, in whole or in part, may be copied, photocopied,

translated, or transmitted by any electronic medium or in machine-readable

form without the prior written permission of AGM Global Vision.

If you have questions that are not covered in this manual, or need service,

contact AGM Global Vision customer support for additional information prior

to returning a product.

AGM Global Vision

173 West Main Street

PO Box 962

Springerville, AZ 85938

Tel. 928.333.4300

Fax 480.393.4882

support@agmglobalvision.com

www.agmglobalvision.com

EXPORT INFORMATION

Buyer acknowledges that all products supplied by AGM Global Vision are

subject to U.S. export control laws, including, but not limited to, the Export

Administration Regulations, the International Economic Emergency Powers

Act, and various U.S. embargoes and sanctions. AGM Global Vision products

may not be exported, re-exported, or transferred contrary to U.S. export control

laws. In particular, AGM Global Vision products may not be exported, re-

exported, or transferred to prohibited countries, individuals, organizations, or

entities, including but not limited to those individuals and entities listed on the

List of Specially Designated Nationals and Blocked Persons administered or

maintained by the U.S. Office of Foreign Assets Control (“OFAC”), the various

lists maintained by the Bureau of Industry and Security of the Department

of Commerce, and the U.S. State Department and Buyer represents and

warrants that neither Buyer nor any of its officers, directors, or employees are

on such lists. Distribution or resale by Buyer to such countries, individuals,

organizations, or entities is expressly prohibited. Buyer has and will maintain a

positive process to ensure compliance with this Section.

2020.02.17

EXPLORATOR FSB50 USER MANUAL 3

FCC INFORMATION

Please take attention that changes or modification not expressly approved by

the party responsible for compliance could void the user’s authority to operate

the equipment.

FCC compliance: This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

EU CONFORMITY STATEMENT

This product and - if applicable - the supplied accessories too

are marked with “CE” and comply therefore with the applicable

harmonized European standards listed under the EMC

Directive 2014/30/EU, the RoHS Directive 2011/65/EU

2012/19/EU (WEEE directive): Products marked with this

symbol cannot be disposed of as unsorted municipal waste in

the European Union. For proper recycling, return this product

to your local supplier upon the purchase of equivalent new

equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains

a battery that cannot be disposed of as unsorted

municipal waste in the European Union. See the product

documentation for specific battery information. The battery

is marked with this symbol, which may include lettering

to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For

proper recycling, return the battery to your supplier or to

a designated collection point. For more information see:

www.recyclethis.info

INDUSTRY CANADA ICES-003 COMPLIANCE

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

AGM Global Vision4

LIST OF CONTENTS

TITLE PAGE

Safety Summary 5

1. GENERAL INFORMATION 6

1.1 System Description 6

1.2 Key Features 7

1.3 Standard Components 8

2. OPERATING INSTRUCTIONS 9

2.1. Basic Operations 9

2.2 Binoculars Setup 13

2.3 Display Settings 14

2.4 Palettes Settings 16

2.5 Wi-Fi Functions 17

2.6 GPS Functions 18

2.7 Capture Setting 18

2.8 Video Setting 18

2.9 Reset Default Setting 19

3. MAINTENANCE 20

3.1 Maintenance 20

3.2 Troubleshooting 21

4. WARRANTY INFORMATION 22

4.1 Warranty Information and Registration 22

5. SPECIFICATIONS 24

5.1 Specifications 24

EXPLORATOR FSB50 USER MANUAL 5

SAFETY SUMMARY

• Read and follow all instructions

• Read all warnings

• Only use the attachments/accessories specified by the manufacturer

• All service must be provided by the manufacturer

WARNING:

This product contains natural rubber latex, which may cause potentially fatal

allergic reactions! If you are allergic to latex, it is important that you strictly

avoid exposure to products that contain it.

WARNINGS AND CAUTIONS:

• All electronic operation should be in strict compliance with the electrical

safety regulations, fire prevention regulations and other related regulations in

your local region.

• Please use the power adapter, which is provided by a proven manufacturer.

The power consumption cannot be less than the required value.

• Do not connect several devices to one power adapter as adapter overload

may cause over-heat or fire hazard.

• Do not drop the device or subject it to physical shock, and do not expose it to

high electromagnetism radiation. Avoid the device installation on vibrations

surface or places subject to shock (ignorance can cause equipment damage).

• Do not place the device in extremely hot (refer to the specification of the

device for the detailed operating temperature), cold, dusty or damp locations,

and do not expose it to high electromagnetic radiation.

• The device cover for indoor use should be kept from rain and moisture.

• Exposing the device to direct sun light, low ventilation or heat source such as

heater or radiator is forbidden (ignorance can cause fire danger).

• Do not aim the device at the sun or extra bright places. A blooming or smear

may occur otherwise (which is not a malfunction however), and affecting the

endurance of sensor at the same time.

• For long-term storage of the battery, make sure you fully charge it every 6

months, to ensure the battery quality. Otherwise, you may damage the battery.

NOTES:

The detector spectral band provides better visibility through smoke, dust, rain,

smog, etc.

Infrared radiation does not travel through glass. As a result, the binoculars

does not detect objects if they are behind glass windows or other barriers.

AGM Global Vision6

1 GENERAL INFORMATION

1.1 SYSTEM DESCRIPTION

AGM Explorator FSB50-640 Handheld Thermal & Optical Bi-spectrum Binocular

is equipped with ultra-low light optical detector, 640×512 thermal detector,

1024×768 OLED display and eyepiece with large field of view. The device can

quickly discover and locate hiding objects even under extreme environment,

such as smoke, fog, rain and snow. It can be widely applied to scenarios like

patrol, law enforcement, search and rescue, drug enforcement, anti-smuggling

and suspect capture.

Due to its waterproof capability the device performs well even in severe

weather conditions and challenging environment. The Explorator’s user-

friendly interface, comfortable and ergonomic buttons makes adoption and

application incredibly simple. The thermal imaging unit offers many different

variants of image palettes: white hot/black hot, etc. that can be easily adapted

depending on different environmental conditions.

The unit can be easily mounted on a tripod which grants operator convenient/

hands free use of thermal binocular.

This high-tech bi-ocular can take four 18650 rechargeable Lithium batteries for

more than 7 hours operating time. Integrated proximity sensor saves energy.

When sensor detects eyes, the OLED screen turns on, otherwise the OLED

screen is off. In addition, an external power supply (5 V) provides an increase

in operating time.

FIGURE 1-1. MAIN PARTS

15 15

2 3

EXPLORATOR FSB50 USER MANUAL 7

TABLE 1-1. MAIN PARTS

ITEM DESCRIPTION ITEM DESCRIPTION

1Body 9Capture Button

2 Focus Ring 10 Power Button

3Thermal Channel Lens 11 Mode Button

4 Optical Channel Lens 12 Adjust Button

5Battery Compartment 13 Tripod Screw

6Eyecup 14 Aviation Connector

7Diopter Adjustment Ring 15 Eyepiece

8Menu Button 15 Proximity Sensor

1.2 KEY FEATURES

• Bi-spectrum image fusion and object highlight (detail enhancement

and target recognition)

• Selection of thermal view channel, visible light channel, or both them

combined

• High resolution 640×512 thermal channel and 1280×960 optical

channel

• Digital Detail Enhancement (DDE)

• Dynamic Noise Reduction (3D DNR)

• Adaptive Automatic Gain Control (AGC)

• Multiple color palettes

• High-sensitivity optical channel for ultra-low illumination conditions

(0.001 lux)

• 0.39-inch OLED display

• Automatic OLED backlight

• Manual focus for thermal lens

• Video recording, replay, picture snapshot and search (capable to

review the event on device)

• Wi-Fi hotspot

• GPS Function

• More than 7 hours continuous running

• Proximity sensor to save power

• Stadiametric rangefinder

• Waterproof, IP67

• Limited 3-Year Warranty

AGM Global Vision8

1.3 STANDARD COMPONENTS

The standard components are shown in Figure 1-2 and listed in Table 1-2.

The ITEM column indicates the number used to identify items in Figure 1-2.

TABLE 1-2. STANDARD COMPONENTS

ITEM DESCRIPTION QUANTITY

1Binocular 1

2Power Adapter 1

3Battery Charger 1

4Operation Manual 1

5Battery 8

6Straps 2

7Aviation Plug Cables 1

8Non-Dust Cloth 1

FIGURE 1-2. STANDARD COMPONENTS

EXPLORATOR FSB50 USER MANUAL 9

2 OPERATING INSTRUCTIONS

2.1. BASIC OPERATIONS

2.1.1 DEVICE CHARGING

For the first use, and when the device is running low, charge the batteries with

your charger.

1. Take the proper plug adapter.

2. Push and hold it, at the mean time slide it toward the inside to assemble the

power adapter.

3. Connect the power adapter to the battery charger.

CHARGER

BASE

PLUG

ADAPTER

FIGURE 2-1. PLUG ADAPTER INSTALLATION

FIGURE 2-2. BATTERY CHARGER CONNECTION

AGM Global Vision10

4. Insert the batteries in the charger with positive/negative terminals

corresponded.

NOTE:

When the charger is powered on, the LCD display automatically lights up, and

all the battery. The charger will detect the battery and charge it.

TABLE 2-1. BATTERY CHARGER STATUS

NO. INDICATORS FUNCTIONS

1 Model & battery bars Standby mode

2Unlighted Power-saving mode.

Press any button to activate it

3Err Battery is damaged

4Blinking Battery is being charged

5Chg. Finish Battery is fully charged

5. Complete battery charging and disassemble the battery.

2.1.2 BATTERY INSTALLATION

Insert the batteries into the battery compartment.

1. Rotate the battery cap counter-clockwise to disassemble it.

2. Insert four batteries with positive/negative marks match with that of the

battery compartment.

3. Align the shape of battery cap with that of the batteries and cover the

batteries.

4. Rotate the battery cap clockwise to fix it.

FIGURE 2-3. BATTERY CAP

FIGURE 2-4. BATTERIES INSTALLATION

Indice

Altri manuali AGM Binocolo

AGM

AGM COBRA Series Manuale utente

Manuali Binocolo popolari di altre marche

Celestron

Celestron VistaPix 72218 Manuale utente

Levenhuk

Levenhuk Atom Digital DNM200 Manuale utente

ATN

ATN PS-15 Manuale utente

Bresser

Bresser TOPAS 7x50 Manuale utente

Berger & Schroter

Berger & Schroter LN-G3-B50 Manuale utente

Leica

Leica geovid 8x42 HD-R Manuale utente

Noblex

Noblex NF 8 x 42 inception Manuale utente

Newcon Optik

Newcon Optik AN Series Manuale utente

PHOTONIS

PHOTONIS VYPER Manuale utente

ATN

ATN 6015-WPT Manuale utente

Famous Trails

Famous Trails ViewCatcher DCB 822 Manuale utente

Opticron

Opticron Marine-3 7x50 BIF.GA Guida all'installazione

Kayoba

Kayoba 009129 Manuale utente

Vixen

Vixen ARENA Series Manuale utente

MAGINON

MAGINON NVB 60 Manuale utente

Leica

Leica Geovid 56 Manuale utente

Leica

Leica GEOVID PRO Manuale utente

Celestron

Celestron LandScout Manuale utente