AHA AHALTM-192W Manuale utente
1
LCD Tablet Monitor
User’s Manual
19 Inch wide
20 Inch wide
22 Inch wide
2
IMPORTANT SAFEGUARDS
1. Read all of these instructions.
2. Save these instructions for later use.
3. Unplug this monitor from the
wall outlet before cleaning. Do not
use liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
4. Do not use attachments not recommended by
the monitor manufacturer as they may cause
hazards.
5. Do not use this monitor near water, e.g., near a
bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool, etc.
6. Do not place this monitor on an
unstable cart, stand, or table. The
monitor may fall, causing serious
injury to a child or adult, and
serious damage to the appliance.
7. Slots and openings in the
cabinet and the back or bottom are
provided for ventilation, to ensure
reliable operation of the monitor,
and to protect it from overheating.
These openings must not be blocked or covered.
The openings should never be blocked by
placing the monitor on a bed, sofa, rug, or other
similar surface. This monitor should never be
placed near or over a radiator or heat register.
This monitor should not be placed in a built-in
installation such as a bookcase unless proper
ventilation is provided.
8. This monitor should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the power
supplied to your home, consult
your monitor dealer or local power company.
9. This monitor is equipped with a
3-wire grounding-type plug, That
is, a plug having a third
(grounding) pin. This plug will
only fit into a grounding-type
power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet.
Do not defeat the purpose of the grounding-type
plug.
10. Do not allow anything to rest
on the power cord. Do not locate
this monitor where the cord will be
abused by people walking on it.
11. Follow all warnings and instructions marked
on the monitor.
12. For added protection for this
monitor during a lightning storm,
or when it is left unattended and
unused for long periods of time,
unplug it from the wall outlet. This
will prevent damage to the monitor and/or the
computer due to lightning and power line surges.
13. Do not overload wall outlets and extension
cords as this can result in fire or electric shock.
14. Never push objects of any kind into this
monitor through cabinet slots, as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the monitor.
15. Do not attempt to service this
monitor yourself, as opening or
removing covers may expose you
to dangerous voltages or other
hazards. Refer all servicing to
qualified service personnel.
16. Unplug this monitor from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. When the power cord or plug is damaged or
frayed.
b. If liquid has been spilled into the monitor.
c. If the monitor has been exposed to rain or
water.
d. If the monitor does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore normal operation.
e. If the monitor has been dropped or the cabinet
has been damaged.
f. When the monitor exhibits a distinct change in
performance, this indicates a need for service.
17. When replacement parts are
required be sure the service
technician has used replacement
parts specified by the manufacturer
that have the same characteristics as
the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
18. Upon completion of any service or repairs to
this monitor, ask the service technician to
perform routine safety checks to determine that
the monitor is safe to operate.
3
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
CAUTION : Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
CANADIAN NOTICE
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
AVIS CANADIEN
Cet appareil numérique de la Class B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
European Union Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the
the Low Voltage Directive (73/23/EEC) issued by the Commission of the European
Community.
Compliance with these directives implies conformity to the following European Norms (in
brackets are the equivalent international standards):
•EN55022 (CISPR 22) - Electromagnetic Interference
•EN55024 - Immunity Test for ITE Product
•EN60950 (IEC950) - Product Safety
•EN61000-3-2 (IEC555-2) - Power Line Harmonics
As an ENERGY STAR®Partner, AHAI&C Co., Ltd. has determined that
thisproduct meets the Energy Star®guidelines for energy efficiency.
WARNING: FOR CONTINUED SAFETY, REPLACE POWER ADAPTOR ONLY WITH
MANUFACTURER'S RECOMMENDED MODELS
4
CONTENTS
Introduction
Product Features ................................................................. 5
Package Overview................................................................ 6
Installation
Display Overview ....................................................................... 7
Connecting the Display ............................................................. 8
Operation & Adjustment
Front Panel Controls................................................................... 9
KEY PROCESS .......................................................................... 10
HOT KEY .................................................................................... 11
ADJUSTMENT PROCEDURE .................................................... 12
OSD FUNCTIONS WITH USING PC .......................................... 13
SELF DIAGNOSIS ...................................................................... 15
Specifications ............................................................................ 16
Factory Preset Timings ............................................................. 20
Display Dimensions ................................................................... 21
Troubleshooting ......................................................................... 24
Pen-Input Driver&Software Installation..................................... 25
5
PRODUCT FEATURES
•The monitor is designed for Pen-Input.
•The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of screen size, position and
screen color.
•The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility.
Advanced microcircuitry makes setup and configuration fast
and effortless.
•The monitor features Advanced Color Controls for fine-tuning
to meet your own personal tastes or application requirements.
Use the on-screen controls to adjust the color temperature,
RGB gain value for the best possible screen color and intensity.
•Press the menu button and activate the Self-Diagnosis menu to
determine whether your monitor is functioning normally, not
receiving a signal or is receiving a signal that is out of scanning
range.
•Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to
eye-strain and headaches.
•The monitor supports the optimal display performance with
1280x1024 at 75Hz.
•With the POWER LIGHT function added,you can enjoy the
bright screen for movie or any other multimedia utilization.
•The monitor is used Adjustable Stand (25°~ 64°).
Introduction
6
Package Overview
This manual explains how to correctly install, operate and get the best performance
from your monitor. Please read this user’s guide carefully before installing your
monitor, then keep it near your monitor for quick reference.
LCD Tablet Monitor
15 pin signal cable DVI Cable (Optional)
Adaptor
AAA BatteryApplication Software
(Pen Soft)
Application Software
(Pen-InputDriver)
Application Software
(eduplus 5.0)
USB cable
Pen Refill x 2
(For Pen-Input Screen)
Pen Figure of
Pen Tweezers
Power cord User’s Manual
If any item is missing or damaged, please contact your dealer.
Please keep the box and packing materials so that you may properly store or transport your monitor.
7
Display Overview
•Front View
•Rear View
LCD Display
Panel
Controls
Stand
Installation
8
⑤USB
①Power ④Audio-in
(option) ②DVI-D
(option)
③VGA
Connecting the Display
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipments are off.
2. Connect one end of the power adapter to the power connector; plug one
end of the AC power cord into the power adapter, and then the other end
into an electrical outlet (①).
3. Connect the VGA signal cable to the 15-pin connector of your host
computer and tighten the screws (③).
4. Connect the Audio-In cable from audio input port of your display to the
Audio-out port of your computer (④).
5. Connect the USB signal cable to the USB connector of your host
computer (⑤).
6. Connect the DVI-D signal cable to the DVI-D connector of your host
computer(②).
7. Turn on your computer and display.
To ensure the LCD display can work well with your computer, please configure the display
mode of your graphic card to make it less than or equal to 1280 x 1024 resolution and make
suretiming of the display mode is compatible with the LCD display.
We have listed the “Compatibility Modes” of this LCD display in appendices for your reference.
Notice:
9
Shows both normal operation
and power management status
with power indicator light..
Switches the monitor on
and off.
1. POWER Indicator 2. POWER
5. SELECT
Moves from top menu to sub
menu in the OSD window and
opens the function window for
the selected icon.
6. MENU
Turns the OSD window on.
Turns the OSD (On-Screen
Display) window off and moves
from sub menu to top menu in
the OSD window.
Moves cursor to the left or high
window in the OSD window and
decreases value of any selected
function.
While the OSD screen is off, you
can adjust the volume directly.
Moves cursor to the right or
low window in the OSD
window and increases the
value of any selected function.
While the OSD screen is off,
you can adjust the brightness
directly.
Launches the AUTO
TRACKING function directly. While the OSD screen is off,
you can adjust the screen
brightness according to each
situation.
(*): Hot Key
3 (*) 4 (*)
7 AUTO (*) 8 POWER LIGHT (*)
OPERATIION & ADJJUSTMENT
Front Panel Controls
10
KEY PROCESS
COLOR
PICTURE
SOUND
LANGUAGE
OSD MENU
FUNCTION
BRIGHTNESS
CONTRAST
COLOR TEMP.
BRIGHTNESS
CONTRAST
COLOR TEMP.
* Sound icon will be displayed only
for Built in speaker model.
SELECT
MENU
MENU
MENU
SELECT
OSD OFF
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali AHA Monitor
