Aim AIVE Guida all'installazione
2021-10-28
REV2.0
Flexible parts feeder system
AIM company l www.aim-fa.com 1
AIM company l www.aim-fa.com
Basic manual
28th.OCT.2021 . Rev2.0
2021-10-28
REV2.0
Flexible parts feeder system
AIM company l www.aim-fa.com 2
1. Introduction
1-1) Copyright and History
1-2) Introduction
1-3) Safety
1-4) Introducing and using AIVE
2. AIVE appearance and installation
2-1) Dimension of AIVE
2-2) Part names and Specifications
2-3) AIVE installation mechanism
2-4) AIVE installation power supply
2-5) Interface panel
3.Control of AIVE
3-1) Principle of operation
3-2) Status LED
3-3) AIVE PC program
3-4) Manual control
3-5) Digital IO
3-6) Ethernet control
3-7) IP change
Contents
2021-10-28
REV2.0
Flexible parts feeder system
AIM company l www.aim-fa.com 3
Chepter1
1. Introduction
AIM company l www.aim-fa.com
1-1) Copyright and History
1-2) Introduction
1-3) Safety
1-4) Introducing and using AIVE
2021-10-28
REV2.0
Flexible parts feeder system
AIM company l www.aim-fa.com 4
All information contained in this document is the property of AIM Co., Ltd., and all
or part of that information may not be reproduced without the prior written consent
of AIM Co., Ltd. This information is subject to change without notice. This document
is reviewed and revised regularly.
AIM is not responsible for any errors or omissions in this document. Requests for
corrections to user errors are always welcome. AIM Co., Ltd. respects the opinions of
our customers and will refer to them when preparing documents in the future.
Please send a comment by email below sales@aim-fa.com
2019 AIM reserves all rights to this document. AIVE is manufactured in South Korea
and is a registered trademark of AIM Co., Ltd.
History
Ver1.0 _ Sep.2019 AIVE2.0 First edition
Ver1.1 _ Apr.2020.04 AIVE2.1 Update
Ver2.0 _ Oct.2021 Renewal
1-1) Copyright and History
2021-10-28
REV2.0
Flexible parts feeder system
AIM company l www.aim-fa.com 5
Mass supply
Variety of
products
Check product
location
Vibration
Turn it over and spread
Parts
supply
Parts handling
Hopper system Flexible feeder Vision system Industrial robot
1-2) Introduction
System configuration between robot and vision system
Turn it over Spread
Wide range and Accurate vibration
Turn it over and spread the product with accurate vibration
Stroke Frequency Time
Optimized control with Data
Vibration control in units of 0.1mm and 1Hz
•Three intuitive data controls
•Convenience such as manual
operation and PC control
2021-10-28
REV2.0
Flexible parts feeder system
AIM company l www.aim-fa.com 6
What to do in an emergency
Use the power off button on the side of the AIVE. Press the emergency stop button
(Yellow background/Red push button) on all robots being used together. This
button de-energizes the feeder and follows the company’s or organization’s internal
procedures in case of an emergency. In case of fire, CO2is used to extinguish the
fire.
1-3) Safety
Safety function
Motor temperature sensor
It is set at 36℃, and when it exceeds this, an alarm code is displayed and the
power to the motor is cut off.
Peak limitation:
Forced stop when the motor maximum current time setting time exceeds 4000mA, 1Sec.
Motor stuck _temperature :
If the motor does not move due to external force, forced stop when the set time is exceeded.
2021-10-28
REV2.0
Flexible parts feeder system
AIM company l www.aim-fa.com 7
The AIVE® feeder is available with a square plastic box attached to the top of the
vibrator and optionally a backlight to illuminate the part.
The plastic upper of AIVE® can be selected according to the product supplied, the
material required, and the color required for the thick product.
The AIVE® feeder is a vibration feeder that can supply a variety of components using a
visionary industrial robot system. The parts come in a variety of shapes and can be
made from a variety of materials.
Contact AIM Engineering for slippery, fragile, or precision parts.
AIVE® feeders are not suitable for handling liquid products or flexible materials.
1-4) Introducing and using AIVE
Most of the AIVE® components are located inside
the body. The top of the unit has an exposed
vibrating feeder and the top of the AIVE is equipped
with a user-supplied camera.
Pictured from the side is the outside of the AIVE®
feeder. Because the vibrating platform is translucent,
the camera can discern the silhouette of the plastic
part.
2021-10-28
REV2.0
Flexible parts feeder system
AIM company l www.aim-fa.com 8
Chepter2
AIVE appearance
and installation
AIM company l www.aim-fa.com
2-1) Dimension of AIVE
2-2) Part names and Specifications
2-3) AIVE installation mechanism
2-4) AIVE installation power supply
2-5) Interface panel
2021-10-28
REV2.0
Flexible parts feeder system
AIM company l www.aim-fa.com 9
2-1) Dimension of AIVE
AIVE2.1
2021-10-28
REV2.0
Flexible parts feeder system
AIM company l www.aim-fa.com 10
AIVE3.0
Indice
Manuali Alimentatore di filo popolari di altre marche
Lincoln Electric
Lincoln Electric LN-25X Manuale utente
Matrix
Matrix OmniFlow 330 Scheda tecnica
EWM
EWM drive 4X IC D EX Manuale utente
Lincoln Electric
Lincoln Electric 12442 Manuale utente
Lincoln Electric
Lincoln Electric Power Feed 10 Robotic K1780-2 Manuale utente
Miller
Miller XR-AlumaFeed Suitcase Manuale utente
Lincoln Electric
Lincoln Electric Activ8X Manuale utente
Abicor Binzel
Abicor Binzel iROB Feed HA Manuale utente
EWM
EWM drive 4X IC D EX Manuale utente
Lincoln Electric
Lincoln Electric LF-72 Manuale utente
Hakko Electronics
Hakko Electronics 373 Manuale utente
Hakko Electronics
Hakko Electronics 375 Manuale utente