AIPTEK MyNote Bluetooth Manuale utente

MyNote Bluetooth
Manual
Version: 1.2

MyNote Bluetooth Manual EN
www.aiptek.eu Page 2
Welcome at Aiptek
Thank you very much for purchasing the MyNote Bluetooth from Aiptek. MyNote Bluetooth is the perfect
companion for all people like to write on normal paper and dream about bringing this content to digital.
While writing on paper the embedded digitizer records the writings and saves up to 100 pages in the
internal memory. The transfer by Bluetooth or USB is quite simple. Send your notes to your PC. Or use the
mobile Phone APP for Android and Blackberry to transfer the notes on your mobile phone and send them
by Email/MMS to colleagues, friends or your office.
Before you start enjoying this product it’s recommend to read this manual and follow the instructions step
by step to get the best result with your new graphic tablet.
Best Regards
Aiptek Team
Safety Notice
1. Do not drop, puncture, roll or disassemble the tablet; otherwise the warranty will be voided.
2. Avoid all contact with water, and dry hands before using.
3. Do not expose to high temperature or leave in direct sunlight.
4. Use the product with care. Avoid pressing hard on it.
5. For your own safety, avoid using the product when there is a storm or lightning.
6. Use only the accessories supplied by the manufacturer.
7. Keep the product out of the reach of infants.
8. Risk of explosion if battery is replaced by an incorrect type.
9. Dispose of used batteries according to the instructions
If the time arises to throw away your product, please recycle all the components possible. Batteries and
rechargeable batteries are not to be disposed in your domestic waste! Please recycle them at your local
recycling point. Together we can help to protect the environment.

MyNote Bluetooth Manual EN
www.aiptek.eu Page 3
Content
Package Contents…………………………………………………………………. Page 3
System Requirements…………………………………………………………... Page 4
Knowing your Device………………………………...……………………….… Page 4/5
Getting started.....…………………………………………………………..…… Page 5/6
Pen Maintenance..................................................................... Page 6/7
Software Installation.………………………………………………………….… Page 7/8
Using Note Manager……………………………………………………………… Page 8/9
MyNote Bluetooth with smart phones…………………………….....…… Page 10
Blackberry Devices…………………………………………………………..….. Page 10-13
Android Devices………………………………………………………….......…. Page 13-15
Specifications…………………………………………………………………….… Page 16
Warranty……………………………………………………………………………… Page 16
Package Contents
Please check if the following items are located in your packaging:
MyNote Bluetooth Pen & 2x Batteries (Type SR 41) USB cable
CD for Windows & MAC Mini CD (My Script Notes) Pen tip remover
2x Ink cartridge Warranty card This Quick Setup Guide
Please contact your dealer immediately if package is incomplete.

MyNote Bluetooth Manual EN
www.aiptek.eu Page 4
System Requirements
For successful use and installation of your MyNote Bluetooth the following minimum system specifications
are required:
CPU : min. 1GHz or higher
RAM : min. 128MB RAM
Hard Disk Space: 50MB
Graphic Card: Min 1024 x 768 screen resolution, 32bit
Operating System: Windows 7 32bit/64bit
Windows Vista (min. SP1) 32bit/64bit
Windows XP (min. SP2)
Mac OS X 10.5 or higher
Other: Optical Drive (CD, DVD, Blueray)
Bluetooth connectivity
1 free USB port
To connect MyNote Bluetooth with a mobile phone your device must run Android 2.1 or higher or
Blackberry 5.0 or higher and having Bluetooth enabled.
Knowing your Device
The Base Unit
USB Connecto
r
Receive
r
Reset
Bluetooth
ON/OFF
Power
/
writin
g
si
g
nal LED
Battery
Status Bluetooth LED
To
p
Side

MyNote Bluetooth Manual EN
www.aiptek.eu Page 5
Power LED: Blink slowly in standby mode; blink quickly during writing.
Battery Status: Blink slowly during charging or when battery is low; steady on when fully
charged.
Bluetooth LED: Blink slowly when bluetooth is on.
Getting started
1. Charge the Battery of the Base Unit
Before using MyNote Bluetooth the first time, the battery needs to be charged.
Connect the device with the supplied USB cable trough the USB connector and
the other side to a powered PC, Mac or notebook. After 3 hours the unit is fully
charged and ready to use. Alternative you can use an optional 5V DC USB
charger which can be purchased in Aiptek webshop. (www.aiptekshop.de)
2. Prepare the pen
Before first time usage the batteries and pen tip must be installed.
a. Remove the battery compartment cover on top of the pen. Do not
attempt to open the other part of the pen itself. This may cause the
pen to malfunction.
b. Install the two SR41 batteries, with the positive poles (+) facing
up.
c. Close the battery compartment cover.
d. Place the pen tip in the pen and gently push it
in until the end is reached. Don’t use to much
pressure to avoid damage of the pen.
3. Power On
The device turns on automatically once you open the folder, the
indicator starts blinking. Put the folder on a flat surface and make sure that
the base unit is located on top of the paper and the holes of the
receiver are not covered.
2x

MyNote Bluetooth Manual EN
www.aiptek.eu Page 6
4. Write a Note
Pick up the digital pen coming with your MyNote Bluetooth and
write normally. During the writing, the indicator on the base
unit blinks fast when signals are received from the pen.
Note:
a. Be careful to hold the pen in a way that does not block the
signals sent from the tip of the pen to the receiver.
b. Make sure the pen point is 1.5 cm away from the base unit. Otherwise, the base unit may not capture
the writing signal correctly.
5. Turn the Page
You can start a new page by turning over the page and then lift the base unit by
its end to reverse. MyNote Bluetooth will automatically detect the page flip and
create a new page on the internal memory.
6. Close MyNote Bluetooth
Close your MyNote Bluetooth once you finished writing. All of your
handwritten notes will be saved in your base unit until you transfer
them by USB or Bluetooth to a PC, Mac or mobile phone.
Pen Maintenance
1. Exchange the Battery
After a time it might be nesessary to exchange the batteries in the pen. When the result of writing is
getting poor, or not all words are recorgnized anymore it’s time to exchange the batteries. Please use only
batteries Type SR41. You can order them from Aiptek webshop.

MyNote Bluetooth Manual EN
www.aiptek.eu Page 7
e. Remove the battery compartment cover on top of the pen. Do
not attempt to open the pen itself. This may cause the pen to
malfunction.
f. Install two new SR41 batteries, with the positive poles facing up.
g. Close the battery compartment cover.
2. Refill the ink cartridge
a. Detach the cap from the digital pen or use the pen tip remover.
b. Clamp the ink refill with the refill extractor. Hold the pen
firmly, and apply pressure with the extractor against it.
c. Pull the used refill out. Slide the new refill into the tip of the pen.
d. Gently press the new refill until it is lodged securely in the
pen.
Note:
The dimension of the pen cartridge is 2.3 ~ 2.4 mm (diameter) x 67 mm (length). You could buy them
at stationary shops or Aiptek webshop: www.aiptekshop.de.
Software Installation
Windows System:
1. Insert the Driver & Application CD into your CD drive and wait until the auto start window
appears. On Windows Vista and Windows 7 you may confirm the action by pressing
>>Continue<< if the User Access Control window appear.
2. Simply follow the steps on the screen and finish the installation of Note Manager.
MAC System:
1. Insert the Software CD into your CD drive and wait until the auto-starter is loaded.
2. Click on the tablet icon and simply follow the steps on the screen and finish the installation with
restarting your system.
After software is installed successfully, connect your MyNote Bluetooth with the USB cable to your MAC.
Your notes are now automatically transferred to you hard disk and stored as TIFF files in “documents”
folder.
For more details please refer to the PDF manual which you can find on the CD.

MyNote Bluetooth Manual EN
www.aiptek.eu Page 8
Using Note Manager (Windows only)
1. Uploading your Mobile Notes (USB)
Open the Note Manager software by clicking on
the desktop icon.
Now simply connect your base unit to your USB port. Select
‘Note Mode’ as the application mode and confirm ‘OK’.
The Note Manager application will detect your unit and will
prompt you to upload your notes. Select “Yes” to start
transferring your notes. Or, simply click the "upload" icon.
2. Uploading your Mobile Notes (Bluetooth)
Start the Bluetooth Environment byclickingtheicononyour
desktop. Make sure the Bluetooth of your PC and MyNote
Bluetooth is turned on. Click on “Add Bluetooth device” and simply
follow the assistant. After searching the assistant should find
“mobile pen”or“MyNote Bluetooth”. Select this device and
use 0000 as passphrase.
If assistant ask you to select a Bluetooth Service Selection
please activate SPP DEV and finish the assistant.
To pair both devices please click the mobile pen SSP Dev
icon which is in your Bluetooth device list now.
Open the Note Manager software by clicking on
the desktop icon. The Note Manager application will detect your unit and will prompt you to upload
your notes. Select “Yes” to start transferring notes.

MyNote Bluetooth Manual EN
www.aiptek.eu Page 9
3. Using the Note Manager
The Note Manager can be used for storing, viewing, searching,
copying and exporting notes. Note Manager is using similar look and
feel like you Windows Explorer, which allows you to browse through
your files in the left panel and view them in the right panel. You can
drag and drop, copy and paste, print and send your notes by email.
The Note Manager contains buttons that give you access to the most commonly used menu commands.
The following table contains a list of each button in the toolbox together with a description of its function.
Button Description Button Description
UPLOAD – When in Connected Mode, you
can upload all your notes from the mobile
unit to your PC using the Digital Pen
application
PRINT -- Prints the selected note/notes
NOTE TO TEXT - Convert handwritten
note to texts. (only available in Windows
Vista or 7)
SHOW AS STICKY NOTE – Make your
Note as Sticky Note
Convert your note to text using
MyScript® Notes. (Only available if the
MyScript Notes recognition software is
installed)
SHOW AS PAPER HOLDER – Make your
Note as a paper holder
+JOIN – Merge multiple notes together SMALL THUMB – Displays small
thumbnails in the Note Manager view
CUT – Cuts the selected note and saves it
to the clipboard
MEDIUM THUMB - Displays medium sized
of thumbnails in the Note Manager view
COPY – Copies the selected note and
saves it to the clipboard
LARGE THUMB - Displays large
thumbnails in the Note Manager view
PASTE – Pastes whatever was last copied
or cut to the clipboard
NOTE MODE
DELETE – Deletes the selected
note/notes
MOUSE MODE – Use your pen as mouse
EDIT NOTE – Allows you to edit a
selected note
ABOUT – Provides you with your Digital
Pen software version information

MyNote Bluetooth Manual EN
www.aiptek.eu Page 10
MyNoteBluetoothwithsmartphones
With the built-in Bluetooth technology, MyNote
Bluetooth can write or make drawings on smart
phones with Blackberry or Google Android
system.
Turn on Bluetooth
Turn on the Bluetooth by pressing the Bluetooth button on the
base unit. The Bluetooth indicator LED starts blinking.
Note:
After one minute the Bluetooth automatically enters energy- save mode. Not all mobile phones can work
with this function. Make sure you did the pairing or connection within one minute.
Blackberry Devices
1. Install the Application
In order to use MyNote Bluetooth on Blackberry devices, you first need to install the iNote application on
your phone. Simply download the application by scanning the QR code bundled with the packaging or
download “iNote” by using AppWorld store. After download please install the application.
2. Pairing Bluetooth
Please make sure that Bluetooth of MyNote Bluetooth is turned on (as explained before). Now you can pair
MyNote Bluetooth with your Blackberry phone. (This procedure should only be done once):
a. Enabled Bluetooth on your BlackBerry.
b. In the home screen, click the button.
c. Click the ‘Manage Connections’icon.
d. Select ‘Setup Bluetooth’.
e. Click the ‘Search’.
Altri manuali per MyNote Bluetooth
1
Indice
Lingue:
Altri manuali AIPTEK Computer portatile


















