Airlink101 ANAS250 Manuale utente
-1-
Home NAS
3.5” IDE Network Attached Storage
Model # ANAS250
User’s Manual
Ver. 1A
-2-
Table of Content
1. Introduction ............................................................................................................3
2. Hard Drive Installation...........................................................................................3
3. Configuring Home Nas..........................................................................................7
3.1 Status – System Information .......................................................................9
3.2 IP Configuration..........................................................................................10
3.3 Maintenance ................................................................................................11
3.4 Samba Administration................................................................................11
3.5 FTP Configuration.......................................................................................13
3.6 Disk Utility....................................................................................................14
4. Accessing Files from HOMENAS – Windows ...................................................15
5. Accessing Files from HOMENAS – Mac OS......................................................16
6. Using HOMENAS Configuration Utility (For Windows User Only)..................19
7. Frequently Asked Questions ..............................................................................22
Technical Support....................................................................................................24
-3-
1. Introduction
The HOMENAS enclosure adds the convenience of network-attached storage to
homes and in small businesses, providing you a central storage location for your data
and letting you share data across your network.
What’s in the Package
zHOMENAS main unit
zHOMENAS vertical stand
zSecuring screws
zNetwork cable (category 5)
zUSB cable
zPower Adapter
zUser Guide
Minimum System Requirements
zApple Safari; Linux Mozilla; Internet Explorer 5.x; Netscape 6.2.x & up
zWindows XP/2000/Me/98se, Mac OS 10.3.x or above, Linux
z3.5” IDE UMDA Hard drive formatted to FAT32 format
2. Hard Drive Installation
This section provides instructions on how to properly install a hard drive into the NAS
device.
WARNING:
The Network Storage device is not hot-swappable. Please make sure that it is turned off and not
connected to the power outlet when performing the following assembly procedure.
Step 1 Unfasten two screws at the rear side of device, and pull out the back cover.
-4-
Step 2 Pull out the front panel.
Step 3 Put the 3.5-inch IDE hard disk into the plate, and connect the IDE and power
cables to your hard drive.
-5-
Step 4 Secure the drive to the plate on the sides with the provided four screws.
Step 5 Insert the plastic plate back to the device.
Step 6 Re-attach the back panel to the device and secure it with the two screws
removed in step 1.
Step 7 Connect Home NAS to your hub, switch, or router with the provided Ethernet
cable, and connect the supplied power adapter. Plug the power cord into a power
outlet.
(Note: You can also connect this device to your computer directly via the provided
USB or Ethernet cable to use it as an external hard drive. However, the Home Nas
should not be connected with both Ethernet and USB cables at the same time.)
The Ethernet port on the HOMENAS is Auto-MDI/MDIX,
which means you can connect it using either a crossover
or a direct network cable.
-6-
Step 8 Turn it on by pressing the power switch on the front of the device. Verify the
Power light is lit.
Congratulations! The hard drive installation is complete!
Connecting the HOMENAS to your Computer is not recommended because many
features will not able to function. The HOMENAS is a multifunctional hard drive
enclosure. In addition to being a network storage device, you can also use it as a
standalone external hard drive via the USB interface.
Max OS X
Driver installation is not required for systems using Mac OS 10.1.2 or above.
Simply connect the HOMENAS using the included USB cable and access the data
by clicking the “Untitled” HDD icon located on your Desktop.
Windows XP, 2K & Windows ME
Driver installation is not required for Windows XP, 2K and Windows Me. Simply
connect the HOMENAS using the included USB cable and access the data via “My
Computer”.
Windows 98 (Download Drivers)
To utilize the USB connectivity, please visit www.airlink101.com to download the
driver
Please ensure that you install the device driver before connecting the USB port.
When you complete the driver installation, reboot your computer, connect the
HOMENAS to your computer and access the data via “My Computer”
-7-
3. Configuring Home Nas
The HOMENAS features a web-based control interface to manage your settings.
Windows Users
Open your web browser and enter http://homenas in the URL address field. You can
also enter the IP address of the HOMENAS.
For security purposes, your login information can be changed via the web control
interface.
When two or more HOMENAS devices are simultaneously connected to your
network, you need to distinguish them by typing “http:// Homenas-XXXX” with their
unique MAC address. Please refer to the sticker on the rear panel for the address
and replace XXXX with the last four digits of the MAC address.
For example if the MACAddress of your HOMENAS is 00-14-3F-AA-01-68, you will
need to enter “http://Homenas-0168” in the URL address bar.
You can also access data in the HOMENAS connecting it directly using the
Ethernet cable with your computer. The HOMENAS will have a default IP of
169.254.0.1 when connected directly.
The HOMENAS features a web-based control interface to manage your settings.
Other Operating Systems Users
When you are planning to perform administrative tasks from a different operating
system, you will need to input IP address of the HOMENAS in the browser URL
address bar.
If you do not know the IP address of the HOMENAS, you will have to do this
additional procedure. You will need to connect the HOMENAS directly to your
-8-
computer, and then restart the computer. After your computer is restarted, input the
default IP address 169.254.0.1 in the browser URL address bar to access the web
control panel.
Enter the username and password information when the login window prompts up.
Default Username: admin
Default Password: admin
Upon a successful login, you will see the following screen.
An overview description of the functions on the left menu bar:
-9-
Status Shows the data related to your HOMENAS such as networking
status and hard drive information. You may also edit administration
and file language settings here.
IP Config Allows you to manually configure the IP address of the HOMENAS
Maintenance Perform firmware upgrade, reboot or reset the HOMENAS
SMB Server Configure the Samba feature of HOMENAS for the home/office
network file sharing capabilities. You can also create/remove
folders and their share permissions.
FTP Server Configure the FTP features of the HOMENAS. You may
add/remove users and their permissions.
Disk Utility Perform hard drive maintenance routines such as Scandisk and
Format.
3.1 Status – System Information
The welcome screen displays the IP address, firmware version and the hard drive
information such as the hard drive type and storage space available.
The administrator may change the web control panel login information in here. You
may also change the default hostname of your HOMENAS here. Keep in mind that
after you change the hostname, you will need to use it to access your HOMENAS. For
example, if you changed your hostname to “FileServer”, please type
-10-
“http://FileServer” to access the Web Control Panel after you submitted your changes.
The Language setting is used to recognize files with characters other than English. If
you have trouble reading your files on the HOMENAS, please select the appropriate
language.
When you reset the HOMENAS, either by the hardware switch or through the web
control panel, all the settings will return to the default setting including the
hostname. The default hostname will remain as HOMENAS-XXXX (where XXXX is
the last four digits of the MAC address).
3.2 IP Configuration
The administrator may use this option to manually define the IP address of the
HOMENAS.
If the hub/router/switch in your network has a DHCP server, then the HOMENAS will
automatically be assigned an IP address.
The HOMENAS can also act as a DHCP server when one is not present in your
network. The default IP of the HOMENAS in DHCP server mode is “169.254.0.1”
and any device that is linked to the network containing will be assigned an IP of
“169.254.0.x” automatically.
Altri manuali per ANAS250
1
Indice
Altri manuali Airlink101 Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
