Airlinkplus AME001 Manuale utente
External Modem
User’s Manual
External Modem
User’s Manual
No part of this publication may be reproduced in any form by any means without the prior written permission.
Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective
companies.
May 2003
I
Contents
CHAPTER 1 BEFORE YOU BEGIN....................................................................................1
1.1 Features.......................................................................................................................................... 1
1.2 Package Contents........................................................................................................................... 1
1.3 Minimum System Requirements ................................................................................................... 1
CHAPTER 2 HARDWARE INSTALLATION ....................................................................3
2.1 Connecting Your Modem.............................................................................................................. 3
2.2 LED Indicators............................................................................................................................... 4
CHAPTER 3 DRIVER INSTALLATION.............................................................................5
3.1 Driver Installation for Windows 95............................................................................................... 5
3.2 Driver Installation for Windows 98............................................................................................... 7
3.3 Driver Installation for Windows Me.............................................................................................. 9
3.4 Driver Installation for Windows 2000......................................................................................... 11
3.5 Driver Installation For Windows XP........................................................................................... 13
3.6 Country Selection ........................................................................................................................ 15
3.7 Verify that Your Modem is Properly Installed............................................................................ 16
3.7.1 For Windows 95/98/Me.................................................................................................................... 16
3.7.2 For Windows 2000/XP ..................................................................................................................... 18
CHAPTER 4 DRIVER UNINSTALLATION.....................................................................21
4.1 Uninstallation from Windows 95/98/Me..................................................................................... 21
4.2 Uninstallation from Windows 2000............................................................................................. 22
4.3 Uninstallation from Windows XP................................................................................................ 24
CHAPTER 5 COMMAND REFERENCE ..........................................................................25
5.1 AT Commands............................................................................................................................. 25
5.1.1 Basic Command Set.......................................................................................................................... 25
5.1.2 Commands Preceded by &................................................................................................................ 28
5.1.3 Commands Preceded by *................................................................................................................. 29
5.1.4 Commands Preceded by \................................................................................................................. 30
5.1.5 Commands Preceded by % .............................................................................................................. 31
5.2 Dial Modifiers............................................................................................................................. 31
5.3 Commands Not Preceded By AT................................................................................................32
5.4 S Register Reference.................................................................................................................... 33
5.4.1 Register Summary............................................................................................................................. 33
5.4.2 Glossary of the S Registers............................................................................................................... 33
CHAPTER 6 MODEM REFERENCE ................................................................................39
6.1 Troubleshooting........................................................................................................................... 39
6.2 Result Codes................................................................................................................................ 39
6.3 Application Examples.................................................................................................................. 40
6.3.1 Dialing a Remote Modem................................................................................................................. 40
6.3.2 Dialing a Stored Number.................................................................................................................. 40
6.3.3 Manual Answer an Incoming Call.................................................................................................... 41
6.3.4 Auto Answer an Incoming Call ........................................................................................................ 41
6.3.5 Voice to Data Switch........................................................................................................................ 41
APPENDICES ........................................................................................................................43
External Modem User's Manual
II
Appendix A: Caller ID Commands (Optional).................................................................................. 43
Appendix B: Technical Specifications .............................................................................................. 45
Appendix C: Quick Reference........................................................................................................... 46
Appendix D: Glossary ....................................................................................................................... 47
Appendix E: ASCII CODE TABLE.................................................................................................. 49
1
CHAPTER 1
BEFORE YOU BEGIN
1.1 Features
These Fax/Data/TAM Modems combine the features of a 56000(receive
only)/33600/28800/14400/9600 bps data modem and a 14400/9600 bps FAX modem. Your
new Fax/Data/TAM Modem gives your personal computer the ability to send and receive FAX
messages over the telephone line like a standard FAX machine. Your Fax/Data/TAM Modem
also allows your PC to communicate with other personal computers, terminals or BBS's
(Bulletin Board Systems) through the data modem functions.
When used as a data modem your Fax/Data/TAM Modem uses the standard AT command set
and is fully compatible with ITU-T V.42, V.42bis, V.34, V.32bis, V.32, V.22bis, V.23, V.22,
V.21, MNP 2-5, Bell 103, 212A and V.90. When used as a Fax/Data/TAM Modem it
communicates with all ITU-T Group 3 FAX machines and is compatible with ITU-T V.27ter,
V.29 and V.17. Switching between DATA mode operation and FAX mode operation of your
Fax/Data/TAM Modem is done through its firmware, no hardware settings are required.
The communication software, which should be used, depends on the kind of machine that you
are going to communicate with. If you are going to call a FAX machine then you must use the
Fax software. If the machine that you are going to communicate with is a modem then you
must use a data modem communications software.
Note: This manual is written to be used for several models of Fax/Data/TAM Modems.
Some of the information in this manual may not apply to your Fax/Data/TAM Modem.
All the description in this manual about Caller ID, V.90 and Fax class 1 applies only to
the models which support these functions.
1.2 Package Contents
Before installation, please check the items of your package. The package should include the
following items:
! The External Modem
! Quick Installation
! Installation CD
If any of the above items are missing, please contact your supplier.
1.3 Minimum System Requirements
Before installation, please check that your computer complies with the following requirements:
! Pentium MMX CPU 166 or above (Recommended CPU: Intel Pentium MMX , AMD K6
MMX, Cyrix 6x86 MMX )
! 16MB RAM
! Operating System: Windows 95/ 98/Me/2000/XP
! CD-ROM drive
3
CHAPTER 2
HARDWARE INSTALLATION
2.1 Connecting Your Modem
Note: For safety, before installing and uninstalling your modem, please make sure the
telephone line is UNPLUGGED from your modem.
Step 1: Power off your computer.
Step 2: Connect one end of the RS-232 serial cable to the modem and the other to your
computer’s serial port.
Note: Connect the male end of the RS-232 cable to the modem’s serial port and the
female end to your computer. Choose suitable 9-pin or 25-pin female connector
according to your computer’s serial port.
Step 3: Plug one end of the RJ-11 phone cord into the LINE jack on the modem, and plug
the other end into your phone jack.
Step 4: For model with PHONE port only. If you want to use a telephone on the modem’s
phone line while the modem is not used , plug the telephone’s cord into the
modem’s PHONE jack.
External Modem User's Manual
4
Step 5: Plug the AC adapter into the modem’s AC IN jack, and plug the other end into an
electrical outlet.
Step 6: When connection is finished, power on your modem before you power on your PC.
The diagram below illustrates the typical external modem connection:
2.2 LED Indicators
After hardware installation, turn on the modem and then your computer. The PWR, HS, and
MR LEDs should illuminate. The description of the LED indicators on the front panel are
listed below (from left to right) :
MR Modem Ready/ Self-testing On: Power on
Flash: Self-testing/ In diagnostic mode
HS High Speed Speeds On: Operating speed at 24000bps or higher
CD Carrier Detect On: Receiving a data carrier signal from remote modem
OH Off Hook On: Modem off hook
Off: Modem on hook
SD Send Data Flash: Transferring data from the modem
RD Receive Data Flash: Receiving data to the modem
TR Terminal Ready On: Modem is on (unless setup by AT commands)
AA Auto-answer On: Set up to answer incoming calls
PWR Power On: power on
5
CHAPTER 3
DRIVER INSTALLATION
After hardware installation, turn on your modem and then power on your PC. Follow the
instructions below to install the drivers for the modem.
3.1 Driver Installation for Windows 95
Step 1: Start Windows 95. The Update Device Driver Wizard appears. Insert the provided
Installation CD into your CD-ROM drive. Click Next.
Step 2: Windows will be unable to locate a driver. Click Other Locations.
Step 3: Click Browse to locate the path of the driver: x:\Driver\Win9x (where x is your
CD-ROM drive) and click OK.
Step 4: Windows will find the location of driver; click Finish.
Step 5: If Copying Files window appears, click Browse to locate the path of the driver:
x:\Driver\Win9x (where x is your CD-ROM drive) and click OK.
Step 6: Windows will continue to detect another device. Click Next and then repeat steps 2-
4 to complete driver installation.
Chapter 3 Driver Installation
7
3.2 Driver Installation for Windows 98
Step 1: Start Windows 98. The Add New Hardware Wizard appears announcing the
detecting of a new hardware. Click Next. Insert the provided Installation CD into
your CD-ROM drive.
Step 2: Select Search for the best driver for your device and click Next.
Step 3: Check Specify a location. Click Browse to locate the path of the driver:
x:\Driver\Win9x (where x is your CD-ROM drive) and click OK. Click Next.
Step 4: When Windows finds the driver file for the device, click Next.
Step 5: If Copying Files window appears, click Browse to locate the driver file and click
OK.
Step 6: Click Finish.
Altri manuali per AME001
1
Indice
Altri manuali Airlinkplus Modem
