AIROCIDE APS-200 Manuale utente
Important Safety InformatIon
READ AND SAVE THESE INSTRUCTIONS
The Airocide® unit should be used only as recommended in this manual.
Failure to follow recommendations can result in serious injury.
• Keep children away from the unit and supervise them when they are near it.
• Do not drop or insert objects into any openings in the unit.
• Do not disassemble the unit, except for removal of the fascia to replace the Reaction Chambers.
• The appliance is not to be used by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
The Airocide® unit, like all electrical appliances, presents the risk of fire,
electric shock, and the potential for serious injury or death if improperly
used. Always follow these precautions:
• Plug the unit directly into a 220-240V AC electrical outlet. DO NOT use extension cords or adapter plugs.
• This unit has a grounded plug. Use only in a compatible outlet that is installed and grounded in
accordance with electrical codes and ordinances. DO NOT alter the plug or force it into any outlet.
• DO NOT use the unit if the cord or plug are damaged.
• Keep the cord out of heavy trac areas. To avoid re hazard, DO NOT put the cord under rugs,
furniture or appliances, near heat registers, radiators, stoves or heaters.
• DO NOT run the cord under carpeting. DO NOT cover the cord with throw rugs, runners, or
similar coverings. DO NOT route the cord under furniture or appliances. Arrange cord away from
trac areas where it might present a tripping hazard.
• DO NOT immerse the unit in water or other liquids or pour water or liquids on the unit.
• DO NOT use the unit with any solid-state speed control devices, such as a dimmer switch, that
controls power to the unit.
• DO NOT operate the unit where combustible gases or vapors are present.
WARNING:
WARNING:
3
Table
of Contents
Clear Air Revolution 5
How it Works 6
Frequently Asked Questions 11
NASA to Now 12
Warranty 13
Contact Us 14
Reaction Chamber Replacement 19
5
Welcome to the Clear Air Revolution
You just gave yourself and your family an invaluable gift. Clear air. When the air is clear, you are suddenly
elevated. Your home becomes a sanctuary where you have the freedom to enjoy more, do more, play
more and even be more.
We want to thank you for making the incredible decision to join the clear air revolution. More
importantly, every day when you wake up feeling better than you ever thought possible, you’ll thank
yourself for making the clear choice.
In this booklet you will nd easy-to-use operating instructions, our technology overview, frequently asked
questions and warranty information. Talk about a dierent kind of air purier! Well, it’s a dierent kind of
technology from a dierent kind of company. Welcome to a whole new you.
The Airocide®Technology
Airocide draws in harmful airborne pathogens and forces them into a densely packed matrix of highly
reactive catalysts that are activated by a high intensity 254-nanometer light. The reaction destroys these
harmful pathogens on contact. Nothing is captured so there is nothing to clean. All that exits is crisp,
clear air.
6
How it Works
Helpful Hints Before Using the Airocide® Air Purifier
1. Identify where you will place the unit. We recommend placing Airocide in your bedroom on
a sturdy object: shelf, nightstand, dresser, desk or use our wall mount or oor stand accessory.
Airocide should be placed anywhere from one to eight feet o of the oor.
2. Place Airocide so it is exposed to air circulation. This means the top, front and two of the side
panels needs to be exposed for proper airow. Do not place Airocide in an enclosed space like a
bookshelf, butted up against a bookshelf or directly next to any piece of furniture.
3. Airocide should run 24 hours a day, seven days a week for optimal benets. Turning your unit o
when you are not home will not provide the maximum results.
Simple Set Up Instructions
1. Remove your Airocide unit from the box and protective packaging from around the unit.
2. (Optional) If you have a decorative sleeve for your Airocide, simply slide it on or o gently from
the back of the unit.
3. Unwrap the grill plate from the protective sleeve and gently place it on the front of the unit. The
grill simply attaches with magnetic latches. Note: When moving your Airocide, you may notice
a rattling sound within the unit, do not worry. This is nothing to be concerned about, it is simply
the inner pieces of the unit shifting. This is normal.
4. Place the unit on your identied location within your home. The unit can be placed horizontally or
vertically depending on your location and preference.
7
5. Plug it in. Your Airocide® uses 0.3 amp at 240 volts (approximately the same as a 60 watt light bulb).
Note: For the rst few days, you may notice a slight smell from your unit. This smell will naturally
dissipate within a few days use.
6. Locate the on/o button on the backside of the unit and press it until you notice the touch controls
illuminate to indicate power to the unit. Your Airocide is up and running on the high setting.
Continue reading to learn more about settings.
On/O
Power
Cord
Grill Plate
BACK
FRONT
8
Settings
To adjust mode, simply touch the appropriate icon on your Airocide®
High - When you turn your Airocide on, it will automatically default to the high setting. This
setting allows for optimal results.
Automatic – Programs the unit to run on high at most times and then transitions to low for a
slower, quieter speed. While most people nd the fan sound helps them sleep better at night,
the Automatic setting oers the option of a quieter setting at night. A light sensor is built within
the unit, so as the room darkens the unit adjusts to low and when enough light is present in the
room it adjusts to high.
Low – The low setting turns the unit to a slow speed. While this setting is not recommended
for optimal results, you may choose to change to a low setting for sleeping if you like a quiet
sleeping environment. In which case, you might consider the automatic setting, which will do that
for you automatically.
Low High Auto
FRONT
9
Operating Modes
Normal Operating Mode
When the power switch is in the “on” position, the front grill is installed and no error condition
is detected, one of the icon lights will indicate the “active” mode (low, high or automatic icons as
referenced on page 8). The “active” mode indicator light will be bright when the “active” mode is rst
selected, then will dim after 10 seconds and remain on until another mode button is pressed again.
Grill Removed Mode
If the front grill is removed while the power switch is in the “on” position, the unit will go into
“standby” mode and the “active” mode indicator light will ash brightly.
Error Mode
If the front grill is installed with the power switch in the “on” position and one or both of the
Reaction Chambers is missing, non-functional or not seated properly, the unit will enter “standby”
mode, causing all of the indicator lights to ash brightly. This condition can be automatically cleared
by correctly installing two functional Reaction Chambers.
Change Reaction Chamber Mode
When the Reaction Chambers need to be changed (once a year), the “active “ mode indicator light
will ash dimly. Your Airocide will not be eective in terms of removing pathogens in any manner at
this point and new Reaction Chambers need to be installed. See Maintenance and Cleaning section
for details.
No Lights
Indicator lights function only when the unit is plugged in and the power button is in the “on” position.
10
Maintenance and Cleaning
1. When the indicator light starts blinking (should be in about a year), you’ll need to change the two
Reaction Chambers inside your unit. To order new Reaction Chambers, go to www.airocide.com.
Your replacement kit will contain all of the information needed to simply change out the Reaction
Chambers and we will even supply you with a pre-paid shipping label to return the used Reaction
Chambers for recycling.
2. If you happen to spill something on the outside of your Airocide®, use a damp clean cloth to wipe
down.
3. There is nothing to clean within your unit, simply dust it as you would any other item in your home.
Available Accessories
1. Decorative Sleeve
2. Floor Stand
3. Wall Mount
4. Replacement Reaction Chamber Kit
For a complete description of the accessories and pricing
Altri manuali per APS-200
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali AIROCIDE Purificatore d'aria
