AirTurn PEDpro Manuale utente
PEDpro
HANDS-FREE BLUETOOTH CONTROLLER
for Bluetooth 4 Tablets AND Computers
Operating Manual
2
3
CONTENTS
Before Turning on Your PEDpro .............................................4
Power.......................................................................................5
Modes......................................................................................6
Changing the MODE...........................................................7
Connecting and Pairing ...........................................................7
Pairing in GATT MODE 1..................................................8
Pairing in MODE 2-6..........................................................8
Reset Pairing .......................................................................9
Power Consumption ................................................................9
Virtual Keyboard in iOS........................................................10
Recharging the Battery..........................................................10
LED Indications.....................................................................10
AirTurn Manager...................................................................11
Unit Identification..................................................................11
Care of Your PEDpro .............................................................12
Warranty................................................................................12
Radio Information..................................................................13
Recycling and Disposal .........................................................15
Trademarks............................................................................15
4
Thank you for purchasing the AirTurn PEDpro hands-
free, Bluetooth foot controller. We hope you enjoy
many years of use from it. From page turning, to effects
management and presentation control, the PEDpro
provides a myriad of uses.
BEFORE TURNING ON YOUR PEDpro
The PEDpro works with most Bluetooth 4 devices. This includes
iPad 3 and later, iPhone 4S and later, and most devices running
Android 4.3 or later with Bluetooth 4.
Most PCs and Macs equipped with Bluetooth 4.x and HID support
are compatible. For older PC’s, AirTurn has Bluetooth 4.1 USB
dongles that support connection to the PEDpro.
A compatible app is required. Apps are listed on the AirTurn
website: http://airturn.com/apps
There are two compatibility modes; GATT and HID. Not all
compatible apps will function in both modes. See the MODES
section for additional information.
5
POWER
ON - Press and hold the Power Button on for one second
and the LED’s flash.
The blue LED will begin to blink 2 times per second until pairing
is started.
OFF - Press and hold the Power Button on the PEDpro until the red
and blue LEDs turn off.
6
MODES
There are six modes available on your PEDpro. Each mode sends
a different signal for each pedal. The PEDpro is set to MODE 2 by
default.
MODE 1: GATT
This mode is app specific. Your app will provide that information.
It is also known as PED-APP-DIRECT.
MODE 2: Page Turn Mode (Default Mode)
Left pedal = Up Arrow. Right pedal = Down Arrow. This is the
most common MODE for all iOS and Android APPS.
MODE 3: Presentation Mode - PgDn/PgUp keys.
Left pedal = PgUp key. Right pedal = PgDn key. This mode is
primarily for PC /MAC document apps such as MS Word,
Powerpoint, Acrobat, etc.
MODE 4: Media Mode
Left Pedal = PlayPause Right Pedal=Next Song
MODE 5: Assisted Technology Mode
Left pedal = Space key. Right pedal = Enter key.
MODE 6: Left/Right mouse click.
Left pedal = Left Mouse click. Right pedal = Right Mouse click.
7
CHANGING THE MODE
1. Turn on the PEDpro.
2. Press and hold the MODE button. The red LED will flash
once per second from1 to 6 flashes. The number
of flashes corresponds to the same MODE
number. Be sure to count the flashes.
3. Release the MODE button following the number of
flashes that reflects the desired MODE. The blue and red
LEDs will flash together the number of times indicating
which MODE has been set.
Example: To set MODE 2 hold the MODE button for 2
flashes of the red LED, release and both LEDS will flash 2
times to confirm the MODE 2 setting.
Note:Once the MODE has been set, it will remain the same
until it is changed following the above steps.
CONNECTING AND PAIRING
Once the PEDpro is powered on, the blue LED will blink 2
times per second until pairing is completed.
8
PAIRING IN GATT MODE 1
Note: This MODE is for GATT specific apps only.
1. Power on the PEDpro.
2. Be sure the PEDpro is in MODE 1.
3. Go to your app and find the Bluetooth setup screen.
4. Find the PEDpro in the device list and tap on it.
5. Tap on the Pair option in the dialog box.
PAIRING IN MODE 2-6
Open your computer’s Bluetooth Setup dialog:
iOS – Select Settings>Bluetooth and turn on the Bluetooth if it is
off. When the PEDpro is discovered, it will appear in the list of
devices. Tap on the selection. A dialog box will then appear. Tap
on Pair.
Android – Select Settings>Bluetooth and turn it on if it is off.
Make sure your device is set to discoverable. Then tap the SCAN
button. When the PEDpro appears, tap to pair.
PC – Select Control Panel, My Bluetooth Devices. Select “Add a
device”. Click next and complete pairing.
MAC – Select Apple, System Preferences, Bluetooth and turn on
Bluetooth. The PEDpro will appear in the Devices window. When
the PEDpro is pairing, the blue LED will blink 3 times per second.
9
Once connected, the blue LED will blink 1 time every 3 seconds.
IMPORTANT: Do not try to connect in MODE 1 and any other
MODE at the same time. MODE 1 only works in GATT MODE
and MODES 2-6 only work when connected directly through the
operating system setup. You must reset pairing to switch modes.
If you choose to use multiple apps in iOS, it is recommended to
use MODE 2 for both apps.
RESET PAIRING
Pairing must be reset whenever switching from one device to
another or when switching between MODES 1 and another mode.
Delete or forget the Bluetooth pairing from your host computer.
With the PEDpro powered on, press and hold the power button for
six seconds. After two seconds, the PEDpro will appear to power
down. Continue to hold the power button. At six seconds both
LEDs will blink three times. After the third blink release the
power button. The device has been reset. Turn on the PEDpro to
pair again with the desired host computer.
POWER CONSUMPTION
The PEDpro uses an idle timeout function to conserve power. After
two hours of inactivity when powered on and connected, the
PEDpro will power down automatically. The timer is reset when
10
any button is pressed.
The PEDpro averagesa usage of 2μA when turned off and averages
a usage of 5μA when turned on.
VIRTUAL KEYBOARD IN iOS
To turn on the virtual keyboard in iOS, put the cursor
into a text box and press the Keyboard Button on the
PEDpro. Both LEDs will flash once to signify that the button has
been pressed. The button will only work in Modes 2-6. Virtual
keyboard support for MODE 1 is automatic.
RECHARGING THE BATTERY
To charge the battery, insert the charging cable into the
micro-USB port and plug the other end into any USB
source. You can also use any micro-USB charging power
supply. Charging from a laptop computer or a computer
with a sleep setting is not recommended. A charge will last for
about 150 hours of continuous use.
LED INDICATIONS
LED
Action
Meaning
Blue
Fast Blinking
Trying to connect to a host
Blue
Slow Blinking
Connected to a host
Altri manuali per PEDpro
1
Indice
Altri manuali AirTurn Controllori
