Airwell MAY 110RC Manuale utente

Owner’s Manual

High Quality Window Type Room Air Conditioner

MAY 110RC

RCA INST MANUAL

General Information 1

Components Name and Function 2

Control Panel 2

Preparations for Operation (Cooling) 3

Cooling Operation 3

Preparations for Operation (Heating) 4

Heating Operation 4

Fan Operation 5

Airflow Direction Adjustment 5

Operation, Maintenance and Care 6

Replacing the filter 6

Precautions 7

Before calling for Service 8

CONTENTS

RCA INST MANUAL

Please read carefully the Owner’s manual before usage and keep it handy to ensure the safe, normal and

satisfactory operation of the air conditioner.

With the most advanced and internationally famous branch rotary compressor and the patented technologies

of the company, the temperature rise of the compressor in use can be slowed down, and thus its working life

will be greatly extended.

A new powder coating technology for metallic materials has been adopted for all easily corrode parts, so that

the anti-corrosiveness of the unit is 100 - 200% higher than that of normally galvanization.

The blower wheel and blades are precision moulded with the adoption of high rigidity engineering plastics, so

that only the serviceability of the blower wheel and blades is enhanced. Also the blades’s section is

aerodynamically shaped, thus reducing the air noise dramatically.

In addition, the unit provides large cooling capacity, low noise, nice aesthetic look, innovational structure etc...

The unit particularly suited for home, office, hotel etc...

GENERAL INFORMATION

RCA INST MANUAL

Ventilation Control

When the slide level is set CLOSE position, the

ventilation door will close and the indoor air can only

be circulated and adjusted. Set the slide lever to

OPEN position at the right opens the ventilation door

in order for air, smoke and smell in the room expelled

outside.

Function Control switch

Off Turn off all operation

Fan Fan only operation.

Lo Cool Cooling operation at low capacity.

Hi Cool Cooling operation at high capacity

Lo Heat Heating operation at low capacity.

Hi Heat Heating operation at high capacity

CONTROL PANEL

COMPONENTS NAME AND FUNCTION

Air Outlet Grille

Power Cord

Intake Grille Air Filter Control Panel (Inside the Cover)

Auto Swing Switch

Thermostat

When you adjust the thermostat to the desired position,

it will automatically control the temperature of indoor air.

The indoor air temperature will get lower at each

thermostat switch clockwise setting.

SELECTOR

Hi Cool

Lo Cool

Fan

Lo Fan

Off

Fan

Hi Heat

5 6

THERMOSTAT

Off On

AIR SWING

Cool

Heat

RCA INST MANUAL

Set the function control switch to “Off”.

Plug the power cord into electrical outlet and turn the unit power.

Turn the temperature control switch to position to “10” and make

preparations for other operations.

High Cool

Turn the function selector switch to “Hi Cool” then the unit automatically conducts

the high cool operation, rapidly reducing the room temperature while

dehumidifying and filtering the air and the dust in the room at the same time.

Low Cool

Turn the function selector switch to “Low Cool” and the unit automatically

conducts mild cooling operation while dehumidifying the room and

eliminating the dust

Temperature Adjustment

After turning on the unit, adjust the temperature controller when the room

temperature reduces to the desired level. Slowly turn the thermostat selecting

switch from the coolest point “10”. The compressor will stop operating when a

“click” sound is heard, indicating that further cooling will cease. The

temperature controller automatically turns on the unit for cooling after the room

temperature has gradually increased, and the temperature controller turns off

the cooling operation when the room temperature reduces to your desired

choice.

Note:

Adjust the temperature controller until you feel comfortable (normally 26 - 30 C).

Remember that after the temperature selector is adjusted, clockwise adjustment of

the temperature selector is not possible within 3 minutes interval, preventing the

compressor from being burnt out.

PREPARATIONS FOR OPERATION (COOLING)

COOLING OPERATIONCOOLING OPERATION

Turning the selector switch Clockwise

SELECTOR

Lo Cool

Fan

Off

Fan

Lo Heat

Hi Cool

Hi Heat

SELECTOR

Lo Cool

Fan

Off

Fan

Lo Heat

Hi Cool

Hi Heat

THERMOSTAT

RCA INST MANUAL

Set the function control switch to “Off”.

Plug the power cord into electrical outlet and turn the unit power.

Turn the temperature control switch to position to “1” and make

preparations for other operations.

High Heat

Turn the function selector switch to “Hi Heat”. The unit automatically conducts

the high heat operation, rapidly increasing the room temperature, while eliminating

the dust in the room at the same time.

Low Heat

Turn the function selector switch to “Low Heat”. The unit automatically

conducts mild heating operation while eliminating dust off the room.

Temperature Adjustment

After turning on the unit, adjust the temperature controller when the room

temperature increases to the desired level. Slowly turn the thermostat

selecting switch from the hottest point “1”. The compressor will stop operating

when a “click” sound is heard, indicating that further heating will cease. The

temperature controller automatically turns on the unit for heating after the

room temperature has gradually decreased, and the temperature controller

turns off the heating operation when the room temperature increases to your

desired choice.

Note:

Adjust the temperature controller until you feel comfortable (normally 26 - 30 C).

Remember that after the temperature selector is adjusted, counter clockwise

adjustment of the temperature selector is not possible within 3 minutes interval,

preventing the compressor from being burnt out.

PREPARATIONS FOR OPERATION (HEATING)

COOLING OPERATIONHEATING OPERATION

Turning the selector switch Clockwise

SELECTOR

Lo Cool

Fan

Off

Fan

Lo Heat

Hi Cool

Hi Heat

SELECTOR

Lo Cool

Fan

Off

Fan

Lo Heat

Hi Cool

Hi Heat

THERMOSTAT

THERMOSTAT SELECTOR

Lo Cool

Fan

Off

Fan

Lo Heat

Hi Cool

Hi Heat

RCA INST MANUAL

The air grills at the right of the unit can be adjusted in four directions. Please select the best flow direction you needs.

Turn the function switch to “Fan”.

This will activate the fan operation time the fan will operation while stopping the

compressor operation except for room ventilation and dust elimination.

When cooling or heating, only air delivery is in operation at the “Fan” position.

Adjust the horizontal grille.

Move the adjustment flaps to direct the air flow up,

down, or horizontal.

FAN OPERATION

AIRFLOW DIRECTION ADJUSTMENT

Set the auto swing at the position of “ON”.

The vertical grille automatically swings to the left or

right.

In order to obtain the particular fixed direction, set

the switch at “ON”.

Set the switch to “OFF” when desired air flow

direction is obtained.

SELECTOR

Hi Cool

Lo Cool

Fan

Off

Fan

Hi Heat

Lo Heat

RCA INST MANUAL

Draw out the air filter ( to the right) from the right side of the front

frame. In the same manner, install a new filter with the side

marked “FRONT” facing outwards.

If the air conditioner uses a disposable, ultra strong electrostatic

filter, which must be replaced in time as specified bty the

manufacturer or move frequently according to actual usage.

Water washing is not allowed. It is recommended to check every

three months if filter replacement is necessary.

Note:. The filter must be purchased from authorized dealer. Note

that the model number on the filter’s package must match the one

you are using.

Note:. If the filter installed under the face frame is not ultra -

strong electrostatic filter, it could be reused after cleaning and

drying.

Please refer to the following suggestions, in order to improve the cooling efficiency, reduce noise and

save electricity costs.

unit

Keep the curtains or blinds close. Direct sunlight reduces the cooling

efficiency of the air conditioners . Close doors and windows to keep the

Do not install near a heat source. Do not use heating sources or heating

appliances near the air conditioner, otherwise the cooling efficiency is

reduced and the plastic panel may suffer deformation.

Do not block the air conditioner’s inlets and outlets. Do not hang clothes or any

other objects near air inlets and outlets.

OPERATION, MAINTENANCE AND CARE

REPLACE THE FILTER

RCA INST MANUAL

The air conditioner must operate in the supply circuit with standard power supply (voltage 230V and frequency 50Hz)

and only the fuse with sufficient rating is allowed for use. Metal wires are forbidden to replace it. The fuse is that in the

power supply circuit should be rated 10A.

The drain outlet is located at the back, at the bottom left of the unit cabinet. Please select a correct draining method in

accordance with the installation manual. Please turn off the air-conditioner, unplug the power cord and inform the

service station immediately in the following cases.

When abnormal circumstances occur in the air-conditioner,

the switch does not operate as usual,

the power plug and the lead are overheating during the unit’s operation,

if the outer covering of the wire is damaged,

if foreign objects enter into the air-conditioner,

If the air conditioner is unexpected splashed with water.

Do not insert sharp rods or other similar objects in the air inlet or

outlet grille when the air conditioner is in operation.

When cleaning the air conditioner, do not splash water on the

unit.

It is forbidden to switch the air conditioner off by pulling the power

cord out.

Use the power switch instead.

If the supply cord is damaged must contact the

manufacturer or his authorized service claimant for

repair, as special purpose tools are required.

PRECAUTIONS

SPECIAL NOTE

Do not restart the unit until the unit has stopped

for three minutes (due to turning off the unit or

power cut.)If not the compressor will be easily

burnt outright.

RCA INST MANUAL

Before calling the service please check the listed conditions in the followings which may correct the failure, saving time

and money as well.

The air conditioner does not operate

Is the power cord connected to the power source?

Is the circuit breaker or fuse open or broken?

- Close the circuit breaker again or replace the fuse.

Is the power cut off?

- Turn on a lamp switch to check if there is a power cut off.

No cool air or reducing cool performance

Is there any error on the indicated temperature setting?

Is the indicated set temperature higher than the room temperature?

- Reset the indicated set temperature.

Does the sun shine directly into the room?

- Shade the sunlight with window curtain, etc.

Is the door or window open?

- Close the room’s doorways and the window.

Are there any obstacles blocking the ventilation of the air inlet or outlet of the air conditioner?

- Remove the obstacles.

Is the extracting fan in the room operating continuously?

Is the air filter blocked?

- Replace the filter.

Correct installation mat reduce vibration and noise.

This unit produces lower noise, but incorrect installation (especially when the unit is directly installed on the glass

window) may result in larger vibration noise. Therefore, we recommend that the installation of this unit be conducted by

the special air conditioner installation team, in accordance with the installation manual we provide with the product.

PRIOR TO CALLING FOR SERVICE

RCA INST MANUAL

Indice

Altri manuali Airwell Condizionatore d'aria

Airwell

Airwell AW-YSDM048-H11 Manuale utente

Airwell

Airwell DS 18 RCG Manuale utente

Airwell

Airwell SAF024 Manuale utente

Airwell

Airwell XLM36IRCB Scheda tecnica

Airwell

Airwell HAF Series Manuale utente

Airwell

Airwell VRF Series Manuale di installazione e funzionamento

Airwell

Airwell MAY 90RCE Manuale utente

Airwell

Airwell HDLS-025N-01M25 Guida

Airwell

Airwell ODU VRF VVEA Series Manuale utente

Airwell

Airwell AW-WHPMA04-H91 Manuale utente

Airwell

Airwell AWAU-YDV280-H13 Manuale utente

Airwell

Airwell AWSI-HMF009-N61 Manuale utente

Airwell

Airwell Aqu@Scop Advance R410A Manuale

Airwell

Airwell GC 12 DCI Manuale utente

Airwell

Airwell AW-YHDM009-H91 Manuale utente

Airwell

Airwell AWSI-HJD009/012-N11 Manuale utente

Airwell

Airwell AWSI-DCV072-N11 Scheda tecnica

Airwell

Airwell XLM9STA Manuale utente

Airwell

Airwell 7SP023054 Manuale utente

Airwell

Airwell CDM Cassette AW-YDFA012-H91 Manuale utente

Airwell

Airwell AWSI-HBV007-N11 Manuale utente

Airwell

Airwell HDLA-025N-09M25 Guida

Airwell

Airwell PNX DCI Nordic Manuale utente

Airwell

Airwell AW-YHDM018-H91 Manuale utente

Manuali Condizionatore d'aria popolari di altre marche

Spheros

Spheros CC 355 Manuale utente

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuale utente

Panasonic

Panasonic CS-E12HKEW Manuale utente

nedis

nedis ACMB1WT7 Manuale utente

Samsung

Samsung AR KV Series Guida

Daikin

Daikin FCFV50A Manuale utente

Fujitsu

Fujitsu Inverter ASBA30JFC Manuale utente

Toshiba

Toshiba RAS-M10SMUV-E Manuale utente

Daikin

Daikin FXLQ20MAVE Manuale utente

Hitachi

Hitachi RAS-E24CAK Manuale utente

CIAT

CIAT Magister 2 Series Guida

Bestron

Bestron AAC6000 Manuale utente

Hisense

Hisense 7K Manuale tecnico

Frigidaire

Frigidaire FFRE0533S1E0 Manuale utente

Samsung

Samsung AS09HM3N Manuale utente

Frigidaire

Frigidaire CRA073PU11 Manuale del proprietario

Soleus Air

Soleus Air GB-PAC-08E4 Manuale utente

McQuay

McQuay MCK020A Manuale utente