AJAX GlassProtect Manuale utente
GlassProtect User manual
Updated January 24, 2022
GlassProtect is a wireless indoor glass break detector recognizing the sound of
shattering the glass at a distance of up to 9 meters. GlassProtect can operate up to
7 years from a pre-installed battery and has a socket for connecting a third-party
wired detector.
GlassProtect connects to the Ajax security system via the protected radio
protocol. The communication range is up to 1,000 meters in line of sight. Also,
GlassProtect can be connected to third-party security systems using the
or integration modules.
Users can configure GlassProtect via the for macOS, Windows, iOS, or
Android. The system notifies users of all events through push notifications, SMS,
and calls (if activated).
The user can connect the Ajax security system to the central monitoring station of
a security company
Jeweller
Ajax
uartBridge Ajax ocBridge Plus
Ajax app
a security company.
Functional elements
Operating Principle
GlassProtect uses a sensitive electret microphone to detect the sound of glass
breaking, consisting of a low-frequency hit sound and high-frequency crashing
sound of glass shatters. Such two-stage glass break detection decreases the risk
of false triggering
Buy breakage detector GlassProtect
1. LED indicator
2. Microphone hole
3. SmartBracket attachment panel (perforated part is required for actuating the
tamper in case of any attempt to dismantle the detector. Don’t break it out!)
4. External detector connection socket
5. QR code
. Device switch
7. Tamper button
of false triggering.
GlassProtect detector does not react to the breaking of the film-covered glass: shockproof,
sunscreen, decorative, or any other type of film. To detect the breaking of such kind of glass,
we recommend using the wireless opening detector with shock and tilt
sensors.
If triggered, GlassProtect immediately transmits the alarm signal to the ,
activating the (if connected) and notifying the user and security company.
Connecting
Detector Connection to hub
Before starting connection:
Only users with administrator rights can add the device to the hub.
Pairing the detector with hub:
DoorProtect Plus
hub
sirens
1. Following the hub user guide, install the . Create the account, add the
hub, and create at least one room.
Ajax app
2. Switch on the hub and check the internet connection (via Ethernet cable and/or
GSM network).
3. Make sure that the hub is disarmed and does not update by checking its status
in the Ajax app.
1. Select Add Device in the Ajax app.
2. Name the device, scan or type the QR code (located on the detector body and
packaging), and select the location room.
For detection and pairing to occur, the detector should be located within the
coverage area of the wireless network of the hub (at a single protected object). The
connection request is transmitted for a short time: at the moment of switching on
the device.
If the device failed to pair (LED blinks once per second) switch it off for 5 seconds
3. Tap Add — the countdown will start.
4. Switch on the device.
If the device failed to pair (LED blinks once per second), switch it off for 5 seconds
and retry. The detector connected to the hub appears in the list of devices in the
app. The update of the detector statuses in the list depends on the device ping
interval set in the hub settings (the default value is 36 seconds).
Connecting to Third-Party Systems
To connect the detector to a third-party central unit using the or
integration module, follow the recommendations in the user manual
of the respective device.
States
The states screen contains information about the device and its current
parameters. Find the GlassProtect states in the Ajax app:
Parameter Value
Temperature
Temperature of the detector, measured on the
processor and changes gradually.
Acceptable error between the value in the app and
temperature at the installation site: 2–4°C
Jeweller Signal Strength
Signal strength between the hub/range extender
and the opening detector.
We recommend installing the detector in places
where the signal strength is 2–3 bars
Connection Connection status between the hub/range
extender and the detector:
uartBridge
ocBridge Plus
1. Go to the Devices tab.
2. Select GlassProtect from the list.
Online — the detector is connected with the
hub/range extender
Offline — the detector has lost connection
with the hub/range extender
ReX range extender name Displays the status of using a
Battery Charge
Battery level of the device. Displayed as a
percentage
Lid The tamper state, which reacts to the detachment
of or damage to the detector body
Delay When Entering, sec
Entry delay (alarm activation delay) is the time
you have to disarm the security system after
entering the room.
Functions for the connected wired detector only.
Delay When Leaving, sec
Delay time when exiting. Delay when exiting
(alarm activation delay) is the time you have to
exit the room after arming the security system.
Functions for the connected wired detector only.
Night Mode Delay When Entering, sec
The time of Delay When Entering in the Night
mode. Delay when entering (alarm activation
delay) is the time you have to disarm the security
system after entering the premises.
Functions for the connected wired detector only.
Night Mode Delay When Leaving, sec The time of Delay When Leaving in the Night
mode. Delay when leaving (alarm activation
delay) is the time you have to exit the premises
after the security system is armed.
Functions for the connected wired detector only
g
radio signal
range extender
How battery charge is displayed in
Ajax apps
What is delay when entering
What is delay when leaving
What is delay when entering
Functions for the connected wired detector only.
Sensitivity
Selecting the sensitivity level of the microphone:
The sensitivity level is selected based on the
results of the
External contact Status of the external detector connection to
GlassProtect
Always Active
If the option is active, the detector is always in
armed mode and notifies about alarms
Chime
When enabled, a siren notifies about opening
detectors triggering in the Disarmed system
mode
Temporary Deactivation Shows the status of the device temporary
deactivation function:
What is delay when leaving
Low
Normal
High
detection zone test
Learn more
What is chime and how it works
No — the device operates normally and
transmits all events
Lid only — the hub administrator has disabled
notifications about triggering on the device
body
Entirely — the device is completely excluded
from the system operation by the hub
administrator. The device does not follow
system commands and does not report
alarms or other events
By number of alarms — the device is
automatically disabled by the system when
Firmware Detector firmware version
Device ID Device identifier
Device No. Number of the device loop (zone)
Settings
To change the detector settings in the Ajax app:
Setting Value
First field Detector name that can be changed. The name is
displayed in the text of SMS and notifications in
the event feed.
The name can contain up to 12 Cyrillic characters
or up to 24 Latin characters
Room
Selecting the virtual room to which GlassProtect
is assigned. The name of the room is displayed in
the text of SMS and notifications in the event feed
y y y
the number of alarms is exceeded (specified
in the settings for Devices Auto Deactivation).
The feature is configured in the Ajax PRO app
By timer — the device is automatically
disabled by the system when the recovery
timer expires (specified in the settings for
Devices Auto Deactivation). The feature is
configured in the Ajax PRO app
1. Select the hub if you have several of them or if you are using the PRO app.
2. Go to the Devices tab.
3. Select GlassProtect from the list.
4. Go to Settings by clicking on the .
5. Set the required parameters.
. Click Back to save the new settings.
Delay When Entering, sec
Selecting delay time when entering. Delay when
entering (alarm activation delay) is the time you
have to disarm the security system after entering
the room.
Functions for the connected wired detector only.
Delay When Leaving, sec
Selecting the delay time when exiting. Delay when
exiting (alarm activation delay) is the time you
have to exit the room after arming the security
system.
Functions for the connected wired detector only.
Arm in night mode If active, the detector will switch to armed mode
when using Night mode
Night Mode Delay When Entering, sec
The time of Delay When Entering in the Night
mode. Delay when entering (alarm activation
delay) is the time you have to disarm the security
system after entering the premises.
Functions for the connected wired detector only.
Night Mode Delay When Leaving, sec
The time of Delay When Leaving in the Night
mode. Delay when leaving (alarm activation
delay) is the time you have to exit the premises
after the security system is armed.
Functions for the connected wired detector only.
Alarm LED indication Allows you to disable the flashing of the LED
indicator during an alarm. Available for devices
with firmware version 5.55.0.0 or higher
What is delay when entering
What is delay when leaving
What is delay when entering
What is delay when leaving
How to nd the rmware version or
the ID of the detector or device?
Sensitivity
Selecting the sensitivity level of the microphone:
The sensitivity level is selected based on the
results of the
External contact If active, GlassProtect registers external detector
alarms
Always Active
If the option is active, the detector is always in
armed mode and notifies about alarms
Alert with a siren if an external contact is open If active, added to the systemare
activated in case of an external detector alarm
Alert with a siren if glass break detected If active, added to the systemare
activated when the glass break detected
Chime settings
Opens the settings of Chime.
Jeweller Signal Strength Test
Switches the detector to the Jeweller signal
strength test mode. The test allows you to check
the signal strength between the hub and
GlassProtect and determine the optimal
installation site
Detection Zone Test Switches the detector to the detection area test
Switches the detector to the signal fade test
mode (available in detectors with firmware
Low
Normal
High
detection zone test
Learn more
sirens
sirens
How to set Chime
What is Chime
What is Jeweller Signal Strength Test
What is Detection Zone Test
Altri manuali per GlassProtect
8
Indice
Altri manuali AJAX Sensore di sicurezza
AJAX
AJAX HomeSiren Manuale utente
AJAX
AJAX MotionProtect Manuale utente
AJAX
AJAX ReX Manuale utente
AJAX
AJAX FireProtect 2 Jeweller Manuale utente
AJAX
AJAX MotionProtect Manuale utente
AJAX
AJAX MotionProtect Manuale utente
AJAX
AJAX LeaksProtect Manuale utente
AJAX
AJAX MotionProtect Plus Fibra Manuale utente
AJAX
AJAX FireProtect 2 (Heat) Jeweller Manuale utente
AJAX
AJAX MotionProtect Manuale utente
AJAX
AJAX DualCurtain Outdoor Manuale utente
AJAX
AJAX MotionProtect Curtain Manuale utente
AJAX
AJAX MotionProtect Plus Manuale utente
AJAX
AJAX CombiProtect Manuale utente
AJAX
AJAX MotionProtect Jeweller Manuale utente
AJAX
AJAX FireProtect 2 Jeweller Manuale utente
AJAX
AJAX FireProtect 2 Jeweller Manuale utente
AJAX
AJAX MotionProtect Manuale utente
AJAX
AJAX DoorProtect Manuale utente
AJAX
AJAX FireProtect 2 Jeweller Manuale utente
