Akai MPC 5000 Manuale tecnico

MPC5000 Update Instructions

•Required Equipment: Compact Flash (CF), Computer running Windows 98, 2000, XP,

or Vista, or Mac OSX

Download and Copy the OS bin file to a Compact Flash Card

1. Go to: http://www.akaipro.com/mpc5000

2. Click on, Docs & Downloads.

3. Click on the link titled MPC5000 - Firmware Update [v1.01].

4. On the next page, click the link titled MPC5000 - Firmware Update v1.01.

5. Once downloaded to your computer, uncompress the file titled mpc5000_os_v101.zip.

The file you’ll download is a .zip file that needs to be uncompressed, or un-zipped.

Many computers come with a utility pre-installed to un-zip .zip files. Simply double-

clicking on the .zip file will often open the utility and allow you to uncompress the file.

Windows Users:

If double-clicking the file does not automatically uncompress it, try right-clicking the file,

and selecting Explore, or Extract. These options should allow you to access the

contents of the file.

If needed, you can download a free un-zipping utility for the PC called WinRar at

http://download.com

Macintosh Users:

Macintosh users of OS 10.3 or later can simply double-click the file to un-zip it.

Macintosh users of earlier operating systems can download a free unzipping utility called

Stuffit Expander at http://www.stuffit.com/mac/expander/trial.html

Once un-zipped, you’ll have an .bin file which needs to copied to a Compact Flash Card.

The file will be called MPC5000_OS.bin.

6. Insert a Compact Flash Card into the MPC5000.

7. Power up the MPC5000.

8. Press the MODE button, then press DISK [Pad 3].

9. Press USB [F4].

10. Connect a USB cable from the USB Port on the rear of the MPC5000 to a USB port on

your computer. The MPC5000 display will change from USB TRANSFER MODE

(Disconnected) to Connected.

Windows 98, 2000, and XP Users:

The Compact Flash Card will appear as a removable disk in My Computer.

Windows Vista Users:

The Compact Flash Card will appear as a removable disk in Computer.

Macintosh Users:

The Compact Flash Card will appear as a removable disk on your Desktop.

11. Copy (or drag) the MPC5000_OS.bin file to the Compact Flash Card. It must be copied

to the root directory on the Compact Flash Card (i.e. the top-most directory, not inside of

a folder).

Windows 98, 2000, and XP Users:

Once the MPC5000_OS.bin file has been copied to the Compact Flash Card, Safely

Remove the MPC5000's Compact Flash Card drive from the computer by clicking on the

Safely Remove Hardware button at the bottom-right of your computer's screen

(indicated with a red circle below).

Windows Vista Users:

Once the MPC5000_OS.bin file has been copied to the Compact Flash Card, Safely

Remove the MPC5000's Compact Flash Card drive from the computer by clicking on the

Safely Remove Hardware button at the bottom-right of your computer's screen

(indicated with a red circle below).

Macintosh Users:

Once the MPC5000_OS.bin file has been copied to the Compact Flash Card, eject the

MPC5000's Compact Flash Card drive from the computer by dragging it's icon from its

place on the desktop, into the trashcan in the dock at the bottom of the screen (or by

highlighting the item on your desktop, then pressing Apple+E on your keyboard).

12. Disconnect the USB cord from the MPC5000.

Updating the MPC5000

1. Power off the MPC5000 (leave the CF card in the MPC)

2. Press and hold down the 2and 3buttons on the MPC5000.

3. While you continue to hold down the 2and 3power the MPC500 back ON (this will

launch the OS Bootloader). The MPC5000 screen will read:

Load Code through CF card.

Validating code image file…

Boot Version: 1.02

The MPC should now start the OS update (it will first erase the Flash ROM and then write

the new OS to Flash ROM). Once the OS Update is completed, the MPC5000 screen

will read:

Notice!

New firmware has been loaded.

Please power off then power on to restart system.

4. Power off the MPC5000 and wait 10 seconds

5. Power on the MPC5000 while holding down the ERASE button (this will reinitialize the

MPC).

Note: Do not turn off the MPC5000 while it is updating the Operating System!

Altri manuali per MPC 5000

9

Indice

Altri manuali Akai Apparecchiature di registrazione

Manuali Apparecchiature di registrazione popolari di altre marche

KV2 Audio

KV2 Audio 500 Series Manuale utente

Robotics Technologies

Robotics Technologies microBus-Cam II Manuale utente

Seca

Seca 460 Manuale utente

Cognex

Cognex MVS-8000 Series Manuale utente

Mect

Mect MPNC006 Series Manuale utente

Bad Caf

Bad Caf THE LEASH Manuale utente

Strymon

Strymon NIGHTSKY Manuale utente

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente

Tews Technologies

Tews Technologies TPMC465 Manuale utente

Honeywell

Honeywell Excel 50 Manuale utente

SeaLevel

SeaLevel COMM+8.LPCI Manuale utente

Arturia

Arturia AUDIOFUSE STUDIO Manuale utente

Rukra

Rukra RK-1240 Manuale utente

Samson

Samson SCOM Manuale utente

Dynacord

Dynacord DPS260 Manuale utente

Nice

Nice Core Manuale utente

Pyle Pro

Pyle Pro PSS8 Manuale utente

RF-System

RF-System TinyGate Manuale per l'uso e la cura