User Guide
Note:
Please read this entire manual to fully understand and safely use this fixture. The
products can be used at the voltage of 100-277V AC, 50/60HZ, suitable for indoor and
outdoor, moisture proof and dust proof applications. Specifications are subject to
change without notice. Please visit www.altechefficiency.com for the most recent
product information.
Unpacking:
1. Unpack and carefully examine the product to make sure all of the materials are
included.
2. if any part(s) were damaged during shipping, please contact us immediately and
save all packing materials
3. DO NOT ATTEMPT TO USE THE FIXTURE IF IT IS DAMAGED IN ANY WAY.
Before You install:
1. Before installing any light fixtures, carefully read and understand all of the installation
instructions and product labels as well as all advisories and warnings. Failure to do
so can result in injury and/or void the warranty.
2. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE THE PROPER
INSTALLATION OF ALL FIXTURES.
3. The product should be installed and operated in accordance with ALL relevant local
codes.
4. There is risk of electric shock. Ensure that main power source is off when wiring any
fixtures.
Maintenance:
1. This fixture is designed for years with minimum care. For optimum performance,
periodically clean the lens with a mild, non abrasive glass cleaner and soft cloth. DO
NOT use solvents or cleaners containing abrasive agents. When cleaning the fixture,
make sure you have the power turned off and do not spray liquid cleaner directly
onto the LED chips, board or wiring.
2. Disconnect the product from the power supply prior to cleaning.
3. Use a dry or slightly moistened cloth for cleaning.
4. Never use any chemicals or abrasive materials on fixture or components.
