Alarmcom ADC-VDB770-BZ Manuale utente
Alarm.com Video Doorbell (ADC-VDB770) - Installation Guide
Use this guide to assist with the installation of your ADC-VDB770 doorbell camera.
Pre-installation checklist
Important: A Video Analytics service package and the Doorbell Cameras add-on is required to enroll the ADC-VDB770.
For more information about which service packages have Video Analytics, see What service packages can support
enrolling the ADC-VDB770?.
• ADC-VDB770 and included accessories
• Wire crimping tool
• Wi-Fi connection to broadband (Cable, DSL, or Fiber Optic) internet
Media, iframe, embed and object tags are not supported inside of a PDF.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
1
• A computer, tablet, or smartphone with Wi-Fi is required if the router does not have the Wi-Fi Protected Setup
(WPS) feature
• Verify the original doorbell rings the chime when you press it.
• Verify that your transformer meets the minimum voltage of 16 VAC and minimum power of 10 VA; specifications are
often written directly on the transformer
• A compatible chime. For more information, see What types of chimes are compatible with the ADC-VDB770
Important: Newer ADC-VDB770s will include a battery-less insert (ADC-VDBA-770BL) instead of an internal battery
and heater. The new version will be marked on the packaging and by a new hardware version number HWV0310+.
Digital chime installations will require a battery replacement kit (ADC-VDBA-770BAT). For more information about how
to use the battery replacement kit, see the ADC-VDB770 Power Guide.
Installation
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
2
Install the power module
1. Verify that the electricity is turned off at the transformer before installing the power module. Locate your chime box
and remove the cover.
Media, iframe, embed and object tags are not supported inside of a PDF.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
3
2. Note the existing wire connections (e.g., the wires may be connected to the Front or Rear doorbell terminal); you
will want to connect to the same doorbell terminal in the next step. Loosen the screws on the chime associated
with the transformer and doorbell. Set the wires aside. For wire gauge recommendations, see What is the
recommended wire gauge/AWG for a video doorbell camera?.
3. Take the power module and hook the curved white wires onto the screw terminals (it does not matter which white
wire goes to the transformer terminal and which goes to the doorbell terminal). Tighten the screws.
4. Using a crimp tool and the wire connectors provided, connect the wires that were set aside to the straight gray
wires of the power module.
5. Affix the power module to the side of the chime using the included adhesive. Replace the chime cover.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
4
Note: The power module must be used in every installation regardless of the chime type. The power module is used to
prevent the chime from buzzing or humming, and it helps ensure sufficient power is provided to the Alarm.com Video
Doorbell.
Install the Alarm.com Video Doorbell
For alternative installation configurations, see ADC-VDB770 wiring guide.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
5
1. Remove the existing doorbell from the wall and disconnect the wires. Secure the wires so that they can be
connected in a later step. If possible, verify that the Alarm.com Video Doorbell will be out of direct sunlight in hotter
climates. For more information, see Can the ADC-VDB770 be used in climates that reach higher or lower than the
temperature rating?.
Media, iframe, embed and object tags are not supported inside of a PDF.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
6
2. At the installation location, an angled mounting bracket can be used to modify the field of view. Choose a mounting
bracket type best suited for your installation setup. Installation scenarios corresponding to mounting bracket types
A, B, and C are provided below to guide your decision.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
7
3. Thread the existing wires through the mounting bracket. Install the mounting bracket to the wall using the included
wall screws (and anchors, if needed for the mounting surface).
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
8
4. Thread the wire extenders through the backplate. Remove the wire caps.
5. Crimp the two wires coming through the backplate to the existing wires threaded through the mounting bracket.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
9
6. Install the doorbell backplate to the mounting bracket using the included machine screws.
7. Attach the doorbell to the backplate by aligning and pushing together until it clicks into place and the connection is
well sealed.
8. Turn the electricity back on. Check that the doorbell camera’s light is flashing white after the boot process is
complete.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
10
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Alarmcom Sistema di interfono
