Albalá Ingenieros DVM3001C02 Manuale utente
DVM3001C02
DUAL 1 INPUT TO 4 OUTPUTS SD-SDI DIGITAL VIDEO DISTRIBUTOR WITH 2
CCVS ANALOG COMPOSITE VIDEO OUTPUTS AND ONE SD-SDI SAFE
OUTPUT PROTECTED WITH BYPASS RELAYS IN THE REAR BOARD
Version 1.0
Albalá Ingenieros, S.A.
Medea, 4 - 28037 Madrid - Spain
27 February 2017 - © Albalá Ingenieros S.A. - All rights reserved
DVM3001C02
DVM3001C02
DUAL 1 INPUT TO 4 OUTPUTS SD-SDI DIGITAL VIDEO DISTRIBUTOR WITH 2
CCVS ANALOG COMPOSITE VIDEO OUTPUTS AND ONE SD-SDI SAFE OUTPUT
PROTECTED WITH BYPASS RELAYS IN THE REAR BOARD
Version 1.0
1. DESCRIPTION ...................................................................................................................... 5
1.1. The DVM3001C02 .......................................................................................................................... 5
1.2. Features ............................................................................................................................................. 6
1.3. Block diagram .................................................................................................................................. 7
2. SPECIFICATIONS ................................................................................................................. 9
3. INSTALLATION .................................................................................................................. 11
3.1. Initial inspection .......................................................................................................................... 11
3.2. Safety instructions ...................................................................................................................... 11
3.3. Environmental considerations ................................................................................................ 12
3.4. Power considerations ................................................................................................................. 12
3.5. Module configuration ................................................................................................................ 12
3.6. Installing the module in the mounting frame ................................................................... 12
3.7. Interconnection ............................................................................................................................ 14
3.7.1. Electrical SDI video connections .................................................................................... 15
3.7.2. Analog video connections ................................................................................................ 15
4. OPERATION ...................................................................................................................... 17
4.1. Front panel description .............................................................................................................. 17
4.2. Module remote control and supervision ............................................................................. 19
4.2.1. Details of the DVM3001C02 registers ......................................................................... 20
5. GLOSSARY ........................................................................................................................ 23
6. REGULATIONS .................................................................................................................. 25
7. VERSIONS ......................................................................................................................... 27
DVM3001C02
Albalá Ingenieros | Manual DVM3001C02
1. DESCRIPTION
1.1. The DVM3001C02
The DVM3001C02 module is a 270Mbit/s SDI video distributor featuring conversion to
analog composite video with 12 bits of resolution. It consists of two sections, each
containing a distributor for digital video with four outputs that provide equalization and
reclocking along with a 4:2:2 PAL/NTSC encoder with two outputs. The DVM3001C02
can also be configured as a single distributor with eight outputs that provide
equalization and reclocking along with a 4:2:2 PAL/NTSC encoder with four outputs.
The DVM3001C02 has been designed for applications where in addition to distribution
of digital video signals a high quality analog video signal is also needed.
Each section of the DVM3001C02 includes a bypass relay on the rear board that
connects the input signal to one of the SD-SDI outputs in case of a power supply failure
or if the main board of the module is removed.
It is possible to monitor the DVM3001C02 status remotely using a communications
controller module installed in the same mounting frame. In addition, certain controller
modules provide SNMP management and the ability to record events in a file including
date and time information for further analysis.
The DVM3001C02 is a TL3000 terminal line module and can be housed in a three rack
unit (3 RU) UR3000 mounting frame or a 1 RU UR3100 mounting frame.
The DVM3001 family includes several SD-SDI digital video distributors and CCVS
composite video converters, with the following variations:
•DVM3001C01: Dual SD-SDI digital video distributor with one input to four outputs and
two CCVS analog composite video outputs.
•DVM3001C02: Dual SD-SDI digital video distributor with one input to four outputs, two
CCVS analog composite video outputs and one SD-SDI output protected with a bypass
relay on the rear board.
5
Albalá Ingenieros | Manual DVM3001C02
1.2. Features
• Dual SD-SDI digital video distributor with composite video encoder.
• Provides two sections, each equipped with:
- A one input to four output SD-SDI video distributor.
- A PAL/NTSC composite video encoder with two outputs.
•Can be configured to distribute one input to eight outputs with four PAL/NTSC video
outputs.
•Each section provides a bypass relay on the rear board that enables the input signal to
be passed through to one of the SD-SDI outputs in case of power loss or module
removal.
•Provides automatic equalizers at the inputs capable of compensating 300+ meters of
Belden 8281 cable.
• Includes reclocking.
• Automatic detection of input signal format (525/625 lines).
• Front panel indicators for signal presence and maximum equalization.
• Provides presets for module configuration storage.
•Module control and supervision can be done remotely when the mounting frame is
equipped with a communications controller module.
•One UR3000 mounting frame can house up to 12 DVM3001C02 modules. If power
supply redundancy is required and FA3000 or FA3001 modules are used then only 10
modules can be housed in the mounting frame. If PSU3300 or PSU3301 modules are
used for this purpose then up to 12 modules can be installed.
• One UR3100 mounting frame can house up to three DVM3001C02 modules.
• Low power.
6
Albalá Ingenieros | Manual DVM3001C02
1.3. Block diagram
7
Albalá Ingenieros | Manual DVM3001C02
DVM3001C02
8
Albalá Ingenieros | Manual DVM3001C02
2. SPECIFICATIONS
SD-SDI digital video signal input
Connector BNC
Impedance 75Ω ± 1 %
Return loss >15dB up to 270 MHz
Input return loss when bypass is active >15dB up to 270 MHz
Output protected with bypass relay Yes
Number of inputs 1 per section, 2 sections
Equalizable cable length:
Belden 8281 >200 m
SD-SDI digital video signal output
Connector BNC
Impedance 75Ω ± 1 %
Return loss >15dB up to 270 MHz
Output return loss when bypass is active >15dB up to 270 MHz
Input to output bypass insertion loss <0.1dB up to 270 MHz
Number of outputs 4 per section
Amplitude 800mVpp ± 10 %
Rise and fall time (20 % - 80 %) 950 ps typ.
SD-SDI digital video signal
Signal format According to SMPTE ST 259 standard
Bit rate 270Mbit/s
Input to output delay 8 ns ± 2 ns
Analog video signal output
Connector BNC
Impedance 75Ω ± 1 %
Return loss >40dB at fsc
Signal format According to ITU-R BT.470-6 standard,
PAL B/G y NTSC M
Number of outputs 2 per section
Separation between outputs >40dB at fsc
DC voltage <50 mV
Analog video signal
Differential gain 0.2 %
Differential phase 0.1 °
Chrominance to luminance delay <5 ns
Video digital to analog converter
Sampling rate 27 MHz
9
Albalá Ingenieros | Manual DVM3001C02
Number of bits 12
General
Maximum power supply current + 440 / - 560 mA
Operating temperature range 0 .. 50 °C
Approximate weight 350 g
10
Indice
Altri manuali Albalá Ingenieros Amplificatore
